Virtual work

Virtual work on a system is the work resulting from either virtual forces acting through a real displacement or real forces acting through a virtual displacement. In this discussion, the term "displacement" may refer to a translation or a rotation, and the term "force" to a force or a moment. When the virtual quantities are independent variables, they are also "arbitrary". Being arbitrary is an essential characteristic that enables one to draw important conclusions from mathematical relations. For example, in the matrix relation

:$mathbf\{R\}^\{*T\}\; mathbf\{r\}\; =\; mathbf\{R\}^\{*T\}\; mathbf\{B\}^\{T\}\; mathbf\{q\}$,

if $mathbf\{R\}^\{*\}$ is an arbitrary vector, then one can conclude that $mathbf\{r\}\; =\; mathbf\{B\}^\{T\}\; mathbf\{q\}$. In this way, the arbitrary quantities disappear from the final useful results.

Principle of virtual work for applied forces

Consider a system of particles, i, in static equilibrium. The total force on each particle iscite book |last=Torby |first=Bruce |title=Advanced Dynamics for Engineers |series=HRW Series in Mechanical Engineering |year=1984 |publisher=CBS College Publishing |location=United States of America |isbn=0-03-063366-4 |chapter=Energy Methods] rp|263

:$mathbf\; \{F\}\_\{i\}^\{(T)\}\; =\; 0$.

Summing the work exerted by the force on each particle that acts through an arbitrary virtual displacement, $delta\; mathbf\; r\_i$, of the system leads to an expression for the virtual work that must be zero since the forces are zero:rp|263

:$delta\; W\; =\; sum\_\{i\}\; mathbf\; \{F\}\_\{i\}^\{(T)\}\; cdot\; delta\; mathbf\; r\_i\; =\; 0$.

At this point it should be noted that the original vector equation could be recovered by recognizing that the work expression must hold for arbitrary displacements. Separating the forces into applied forces, $mathbf\; F\_i$, and constraint forces, $mathbf\; C\_i$, yieldsrp|263

:$delta\; W\; =\; sum\_\{i\}\; mathbf\; \{F\}\_\{i\}\; cdot\; delta\; mathbf\; r\_i\; +\; sum\_\{i\}\; mathbf\; \{C\}\_\{i\}\; cdot\; delta\; mathbf\; r\_i\; =\; 0$.

If arbitrary virtual displacements are assumed to be in directions that are orthogonal to the constraint forces, the constraint forces do no work. Such displacements are said to be "consistent" with the constraints.cite web |url=http://comp.uark.edu/~icjong/docu/05Portland.pdf |title=Teaching Students Work and Virtual Work Method in Statics:A Guiding Strategy with Illustrative Examples |accessdate=2007-09-24 |author=Ing-Chang Jong |year=2005 |format=PDF |work=Proceedings of the 2005 American Society for Engineering Education Annual Conference & Exposition |publisher=American Society for Engineering Education ] This leads to the formulation of the "principle of virtual work for applied forces", which states that forces applied to a static system do no virtual work:rp|263

:$delta\; W\; =\; sum\_\{i\}\; mathbf\; \{F\}\_\{i\}\; cdot\; delta\; mathbf\; r\_i\; =\; 0$.

There is also a corresponding principle for accelerating systems called D'Alembert's principle, which forms a theoretical basis for Lagrangian mechanics.

Virtual work principle for a rigid body

If the principle of virtual work for applied forces is used on individual particles of a rigid body, the principle can be generalized for a rigid body: "When a rigid body that is in equilibrium is subject to virtual compatible displacements, the total virtual work of all external forces is zero; and conversely, if the total virtual work of all external forces acting on a rigid body is zero then the body is in equilibrium".

The expression "compatible displacements" means that the particles remain in contact and displace together so that the work done by pairs of action/reaction inter-particle forces cancel out. Various forms of this principle have been credited to Johann (Jean) Bernoulli (1667-1748) and Daniel Bernoulli (1700-1782).

Virtual work principle for a deformable body

Consider now the free body diagram of a deformable body, which is composed of an infinite number of differential cubes as shown in the figure. Let's define two unrelated states for the body:
* The -State (Fig.a): This shows external surface forces T, body forces f, and internal stresses in equilibrium.
* The -State (Fig.b): This shows continuous displacements $mathbf\; \{u\}^*$ and consistent strains .The superscript * emphasizes that the two states are unrelated. Other than the above stated conditions, there is no need to specify if any of the states are real or virtual.

Imagine now that the forces and stresses in the -State undergo the displacements and deformations in the -State: We can compute the total virtual (imaginary) work done by "all forces acting on the faces of all cubes" in two different ways:

* First, by summing the work done by forces such as $F\_A$ which act on individual common faces (Fig.c): Since the material experiences compatible displacements, such work cancels out, leaving only the virtual work done by the surface forces T (which are equal to stresses on the cubes' faces, by equilibrium).

* Second, by computing the net work done by stresses or forces such as $F\_A$, $F\_B$ which act on an individual cube, e.g. for the one-dimensional case in Fig.(c):

:

:where the equilibrium relation $frac\{\; partial\; sigma\; \}\{partial\; x\}+f=0$ has been used and the second order term has been neglected.

:Integrating over the whole body gives:

: - Work done by the body forces f.

Equating the two results leads to the principle of virtual work for a deformable body::

where the total external virtual work is done by T and f. Thus,

:

The right-hand-side of (d,e) is often called the internal virtual work. The principle of virtual work then states: "External virtual work is equal to internal virtual work when equilibriated forces and stresses undergo unrelated but consistent displacements and strains". It includes the principle of virtual work for rigid bodies as a special case where the internal virtual work is zero.

For practical applications:

* In order to impose equilibrium on real stresses and forces, we use consistent virtual displacements and strains in the virtual work equation.

* In order to impose consistent displacements and strains, we use equilibriated virtual stresses and forces in the virtual work equation.

These two general scenarios give rise to two often stated variational principles. They are valid irrespective of material behaviour.

Principle of virtual displacements

Depending on the purpose, we may specialize the virtual work equation. For example, to derive the principle of virtual displacements in variational notations for supported bodies, we specify:

* Virtual displacements and strains as variations of the real displacements and strains using variational notation such as $delta\; mathbf\; \{u\}\; equiv\; mathbf\{u\}^*$ and

* Virtual displacements be zero on the part of the surface that has prescribed displacements, and thus the work done by the reactions is zero. There remains only external surface forces on the part $S\_t$ that do work.

The virtual work equation then becomes the principle of virtual displacements:

:

This relation is equivalent to the set of equilibrium equations written for a differential element in the deformable body as well as of the stress boundary conditions on the part $S\_t$ of the surface. Conversely, (f) can be reached, albeit in a non-trivial manner, by starting with the differential equilibrium equations and the stress boundary conditions on $S\_t$, and proceeding in the manner similar to (a) and (b).

Since virtual displacements are automatically compatible when they are expressed in terms of continuous, single-valued functions, we often mention only the need for consistency between strains and displacements. The virtual work principle is also valid for large real displacements; however, Eq.(f) would then be written using more complex measures of stresses and strains.

Principle of virtual forces

Here, we specify:

* Virtual forces and stresses as variations of the real forces and stresses.

* Virtual forces be zero on the part $S\_t$ of the surface that has prescribed forces, and thus only surface (reaction) forces on $S\_u$ (where displacements are prescribed) would do work.

The virtual work equation becomes the principle of virtual forces:

:

This relation is equivalent to the set of strain-compatibility equations as well as of the displacement boundary conditions on the part $S\_u$. It has another name: the principle of complementary virtual work.

Alternative forms

A specialization of the principle of virtual forces is the unit dummy force method, which is very useful for computing displacements in structural systems. According to D'Alembert's principle, inclusion of inertial forces as additional body forces will give the virtual work equation applicable to dynamical systems. More generalized principles can be derived by:

* allowing variations of all quantities.
* using Lagrange multipliers to impose boundary conditions and/or to relax the conditions specified in the two states.

These are described in some of the references.

Among the many energy principles in structural mechanics, the virtual work principle deserves a special place due to its generality that leads to powerful applications in structural analysis, solid mechanics, and finite element method in structural mechanics.

ee also

*Flexibility method
*Unit dummy force method
*Finite element method in structural mechanics
*Calculus of variations
*Lagrangian mechanics

References

Bibliography

*Bathe, K.J. "Finite Element Procedures", Prentice Hall, 1996. ISBN 0-13-301458-4
*Charlton, T.M. "Energy Principles in Theory of Structures", Oxford University Press, 1973. ISBN 0-19-714102-1
*Dym, C. L. and I. H. Shames, "Solid Mechanics: A Variational Approach", McGraw-Hill, 1973.
*Greenwood, Donald T. "Classical Dynamics", Dover Publications Inc., 1977, ISBN 0-486-69690-1
*Hu, H. "Variational Principles of Theory of Elasticity With Applications", Taylor & Francis, 1984. ISBN 0-677-31330-6
*Langhaar, H. L. "Energy Methods in Applied Mechanics", Krieger, 1989.
*Reddy, J.N. "Energy Principles and Variational Methods in Applied Mechanics", John Wiley, 2002. ISBN 0-471-17985-X
*Shames, I. H. and Dym, C. L. "Energy and Finite Element Methods in Structural Mechanics", Taylor & Francis, 1995, ISBN 0-89116-942-3
*Tauchert, T.R. "Energy Principles in Structural Mechanics", McGraw-Hill, 1974. ISBN 0-07-062925-0
*Washizu, K. "Variational Methods in Elasticity and Plasticity", Pergamon Pr, 1982. ISBN 0-08-026723-8
*Wunderlich, W. "Mechanics of Structures: Variational and Computational Methods", CRC, 2002. ISBN 0-8493-0700-7