Reverse DNS lookup

Reverse DNS lookup

Contents

In computer networking, reverse DNS lookup or reverse DNS resolution (rDNS) is the determination of a domain name that is associated with a given IP address using the Domain Name System (DNS) of the Internet.

Computer networks use the Domain Name System to determine the IP address associated with a domain name. This process is also known as forward DNS resolution. Reverse DNS lookup is the inverse process, the resolution of an IP address to its designated domain name.

The reverse DNS database of the Internet is rooted in the Address and Routing Parameter Area (arpa) top-level domain of the Internet. IPv4 uses the in-addr.arpa domain and the ip6.arpa domain is delegated for IPv6. The process of reverse resolving an IP address uses the pointer DNS record type (PTR record).

Internet official documents (RFC 1033, RFC 1912 Section 2.1) specify that "Every Internet-reachable host should have a name" and that such names match with a reverse pointer record.

IPv4 reverse resolution

Reverse DNS lookups for IPv4 addresses use a reverse IN-ADDR entry in the special domain in-addr.arpa. In this domain, an IPv4 address is represented as a concatenated sequence of four decimal numbers, separated by dots, to which is appended the second level domain suffix .in-addr.arpa. The four decimal numbers are obtained by splitting the 32-bit IPv4 address into four 8-bit portions and converting each 8-bit portion into a decimal number, these decimal numbers are then concatenated in the order : least significant 8-bit portion first (leftmost), most significant 8-bit portion last (rightmost). It is important to note that this is the reverse order to the usual dotted-decimal convention for writing IPv4 addresses in textual form.

For example, an address (A) record for mail.example.com points to the IP address 192.0.2.5. In pointer records of the reverse database, this IP address is stored as the domain name 5.2.0.192.in-addr.arpa pointing back to its designated host name mail.example.com. This allows it to pass the Forward Confirmed reverse DNS process.

Classless reverse DNS method

Historically, Internet registries and Internet service providers allocated IP addresses in blocks of 256 (for Class C) or larger octet-based blocks for classes B and A. By definition, each block fell upon an octet boundary. The structure of the reverse DNS domain was based on this definition. However, with the introduction of Classless Inter-Domain Routing, IP addresses were allocated in much smaller blocks, and hence the original design of pointer records was impractical, since autonomy of administration of smaller blocks could not be granted. RFC 2317 devised a methodology to address this problem by using canonical name (CNAME) DNS records.

IPv6 reverse resolution

Reverse DNS lookups for IPv6 addresses use the special domain ip6.arpa. An IPv6 address appears as a name in this domain as a sequence of nibbles in reverse order, represented as hexadecimal digits as subdomains. For example, the pointer domain name corresponding to the IPv6 address 2001:db8::567:89ab is b.a.9.8.7.6.5.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.b.d.0.1.0.0.2.ip6.arpa.

Multiple pointer records

While most rDNS entries only have one PTR record, DNS does not restrict the number. However, having multiple PTR records for the same IP address is generally not recommended, unless there is a specific need. For example, if a web server supports many virtual hosts, there may be one PTR record for each host and some versions of name server software will allocate this automatically. Multiple PTR records can cause problems, however, including triggering bugs in programs that only expect single PTR records and, in the case of a large web server, having hundreds of PTR records can cause the DNS packets to be much larger than normal.

Records other than PTR records

Record types other than PTR records may also appear in the reverse DNS tree. In particular, encryption keys may be placed there for IPsec (RFC 4025), SSH (RFC 4255) and IKE (RFC 4322), for example. Less standardized usages include comments placed in TXT records and LOC records to identify the geophysical location of an IP address.

Uses

The most common uses of the reverse DNS include:

  • The original use of the rDNS: network troubleshooting via tools such as traceroute, ping, and the "Received:" trace header field for SMTP e-mail, web sites tracking users (especially on Internet forums), etc.
  • One e-mail anti-spam technique: checking the domain names in the rDNS to see if they are likely from dialup users, dynamically assigned addresses, or other inexpensive internet services. Owners of such IP addresses typically assign them generic rDNS names such as "1-2-3-4-dynamic-ip.example.com." Since the vast majority, but by no means all, of e-mail that originates from these computers is spam, many spam filters refuse e-mail with such rDNS names. [1][2]
  • A Forward-confirmed reverse DNS (FCrDNS) verification can create a form of authentication showing a valid relationship between the owner of a domain name and the owner of the server that has been given an IP address. While not very thorough, this validation is strong enough to often be used for whitelisting purposes, mainly because spammers and phishers usually can't pass verification for it when they use zombie computers to forge domains.
  • System logging or monitoring tools often receive entries with the relevant devices specified only by IP addresses. To provide more human-usable data, these programs often perform a reverse lookup prior to writing the log , thus writing a name rather than the IP address

References

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Reverse DNS — lookup (rDNS) bezeichnet eine DNS Anfrage, bei der zu einer IP Adresse der Name ermittelt werden soll. Alternativbezeichnungen sind inverse Anfragen1), reverse lookup oder inverse requests. Das Pendant beim Telefon ist die so genannte Inverssuche …   Deutsch Wikipedia

  • Reverse-DNS — The reverse domain name system (reverse DNS), sometimes confused with Reverse DNS lookup or Reverse domain hijacking, is a system for naming components, packages, or types in computer systems. A characteristic of reverse DNS strings is that they… …   Wikipedia

  • Forward Confirmed reverse DNS — FCrDNS, or Forward Confirmed Reverse DNS, is when an IP address has both forward (name > IP) and reverse (IP > name) DNS entries that match each other. The process is outlined in RFC 1912, especially section 2.1. First a reverse DNS lookup is… …   Wikipedia

  • Forward-confirmed reverse DNS — (FcrDNS) oder genauer forward confirmed reverse DNS lookup bezeichnet zwei hintereinander ausgeführte DNS Anfragen, bei denen zunächst zu einer IP Adresse der zugehörige Name ermittelt wird (sogenannter reverse DNS lookup), und anschließend zu… …   Deutsch Wikipedia

  • Reverse — may refer to: *The reverse side of currency or a flag; see Obverse and reverse *A change in the direction of: **the movement of a motor or other prime mover; see Transmission (mechanics) **an engineering design: see Reverse engineering **a jet… …   Wikipedia

  • Reverse lookup — may refer to:* Reverse phone * Reverse DNS lookup …   Wikipedia

  • Reverse Lookup — Dieser Artikel oder Abschnitt bedarf einer Überarbeitung. Näheres ist auf der Diskussionsseite angegeben. Hilf mit, ihn zu verbessern, und entferne anschließend diese Markierung. Reverse DNS lookup (rDNS) bezeichnet eine DNS Anfrage, bei der zu… …   Deutsch Wikipedia

  • Lookup — In computing, lookup usually refers to searching a data structure for an item that satisfies some specified property . For example, variable lookup performed by a (scripting) language interpreter, virtual machine or other similar engine usually… …   Wikipedia

  • Reverse Delegation — Dieser Artikel oder Abschnitt bedarf einer Überarbeitung. Näheres ist auf der Diskussionsseite angegeben. Hilf mit, ihn zu verbessern, und entferne anschließend diese Markierung. Reverse DNS lookup (rDNS) bezeichnet eine DNS Anfrage, bei der zu… …   Deutsch Wikipedia

  • DNS-Server — Domain Name System (DNS) Familie: Internetprotokollfamilie Einsatzgebiet: Namensauflösung Ports: 53/UDP, 53/TCP DNS im TCP/IP‑Protokollstapel: Anwendung DNS Transport UD …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”