Colors of noise

Colors of noise
Colors of noise
White
Pink
Red (Brownian)
Grey

While noise is by definition derived from a random signal, it can have different characteristic statistical properties corresponding to different mappings from a source of randomness to the concrete noise. Spectral density (power distribution in the frequency spectrum) is such a property, which can be used to distinguish different types of noise. This classification by spectral density is given "color" terminology, with different types named after different colors, and is common in different disciplines where noise is an important factor (like acoustics, electrical engineering, and physics). However, different fields may use the terminology with different degrees of specificity.

Contents

Power-law noise

Many of these definitions assume a signal with components at all frequencies, with a power spectral density per unit of bandwidth proportional to 1/f β and hence they are examples of power-law noise. For instance, the spectral density of white noise is flat (β = 0), while flicker or pink noise has β = 1, and brown noise has β = 2.

Technical definitions

Various noise models are employed in analysis, many of which fall under the above categories. AR noise or "autoregressive noise" is such a model, and generates simple examples of the above noise types, and more. The Federal Standard 1037C Telecommunications Glossary[citation needed] defines white, pink, blue, and black.

The color names for these different types of sounds are derived from a loose analogy between the spectrum of frequencies of sound wave present in the sound (as shown in the blue diagrams) and the equivalent spectrum of light wave frequencies. That is, if the sound wave pattern of "blue noise" were translated into light waves, the resulting light would be blue, and so on.

White noise

White noise spectrum. Flat power spectrum.
(logarithmic frequency axis)

White noise is a signal (or process), named by analogy to white light, with a flat frequency spectrum [1]. In other words, the signal has equal power in any band of a given bandwidth (power spectral density). For example, with a white noise audio signal, the range of frequencies between 40 Hz and 60 Hz contains the same amount of sound power as the range between 4000 Hz and 4020 Hz has.

Pink noise

Pink noise spectrum. Power density falls off at 10 dB/decade (-3 dB/octave).

The frequency spectrum of pink noise is linear in logarithmic space; it has equal power in bands that are proportionally wide.[1][2] This means that pink noise would have equal power in the frequency range from 40 to 60 Hz as in the band from 4000 to 6000 Hz. Since humans hear in such a proportional space, where a doubling of frequency (an octave) is perceived the same regardless of actual frequency (40–60 Hz is heard as the same interval and distance as 4000–6000 Hz), every octave contains the same amount of energy and thus pink noise is often used as a reference signal in audio engineering. The power density, compared with white noise, decreases by 3 dB per octave (density proportional to 1/f ). For this reason, pink noise is often called "1/f noise".

Since there are an infinite number of logarithmic bands at both the low frequency (DC) and high frequency ends of the spectrum, any finite energy spectrum must have less energy than pink noise at both ends. Pink noise is the only power-law spectral density that has this property: all steeper power-law spectra are finite if integrated to the high-frequency end, and all flatter power-law spectra are finite if integrated to the DC, low-frequency limit.

Brown(ian) noise

Brown spectrum (-6 dB/octave)

In fields that adopt precise definitions, the terminology "red noise", also called Brown noise or Brownian noise, will usually refer to a power density which decreases 6 dB per octave with increasing frequency (density proportional to 1/f 2)[1] over a frequency range which does not include DC (in a general sense, does not include a constant component, or value at zero frequency). In areas where terminology is used loosely, "red noise" may refer to any system where power density decreases with increasing frequency.[3]

The first definition can be generated by an algorithm which simulates Brownian motion or by integrating white noise. "Brown" noise is not named for a power spectrum that suggests the color brown; rather, the name is a corruption of Brownian motion. "Red noise" describes the shape of the power spectrum, with pink being between red and white. Also known as "random walk" or "drunkard's walk" noise.

Blue noise

Blue spectrum (+3 dB/octave)

Blue noise is also called azure noise. Blue noise's power density increases 3 dB per octave with increasing frequency (density proportional to f ) over a finite frequency range.[1][4] In computer graphics, the term "blue noise" is sometimes used more loosely as any noise with minimal low frequency components and no concentrated spikes in energy. This can be good noise for dithering.[5] Retinal cells are arranged in a blue-noise-like pattern which yields good visual resolution.[6][5]

Violet noise

Violet spectrum (+6 dB/octave)

Violet noise is also called purple noise. Violet noise's power density increases 6 dB per octave with increasing frequency[1][7][8] (density proportional to f 2) over a finite frequency range. It is also known as differentiated white noise, due to its being the result of the differentiation of a white noise signal.

Grey noise

Grey spectrum

Grey noise is random white noise subjected to a psychoacoustic equal loudness curve (such as an inverted A-weighting curve) over a given range of frequencies, giving the listener the perception that it is equally loud at all frequencies.[citation needed] This is in contrast to standard white noise which has equal strength over a linear scale of frequencies but is not perceived as being equally loud due to biases in the human equal-loudness contour.

Unofficial colors

There are also many "unofficial" colors, usually with multiple definitions.

Red noise

  1. A synonym for Brownian noise, as above[9]
  2. A synonym for pink noise, as above[10]

Orange noise

Orange noise is quasi-stationary noise with a finite power spectrum with a finite number of small bands of zero energy dispersed throughout a continuous spectrum. These bands of zero energy are centered about the frequencies of musical notes in whatever scale is of interest. Since all in-tune musical notes are eliminated, the remaining spectrum could be said to consist of sour, citrus, or "orange" notes.[11]

Green noise

  1. "Green noise is supposedly the background noise of the world. A really long term power spectrum averaged over several outdoor sites. Rather like pink noise with a hump added around 500 Hz."[11]
  2. The mid-frequency component of white noise, used in halftone dithering[12]
  3. Bounded Brownian noise

Black noise

Black noise is also called silent noise.

  1. Silence[1]
  2. Noise with a 1/fβ spectrum, where β > 2 (Manfred Schroeder, "Fractals, chaos, power laws"). Used in modeling various environmental processes.[11]
  3. Noise that has a frequency spectrum of predominantly zero power level over all frequencies except for a few narrow bands or spikes. Note: An example of black noise in a facsimile transmission system is the spectrum that might be obtained when scanning a black area in which there are a few random white spots. Thus, in the time domain, a few random pulses occur while scanning.[13]
  4. "The output of an active noise control system which cancels an existing noise, leaving the local environment noise free. The comic book character Iron Man used to have a "black light beam" that could darken a room in this manner, and popular science fiction has a tendency to portray active noise control in this light."[11] The Batman Beyond supervillian Shriek also had a weapon like this, which effectively blocked out all noise.[citation needed]
  5. "As seen in the sales literature for an ultrasonic vermin repeller, black noise with a power density that is constant for a finite frequency range above 20 kHz. More accurately, ultrasonic white noise. This black noise is like the so-called black light with frequencies too high to be sensed, but still capable of affecting the environment."[11]
  6. Noise with a spectrum corresponding to the blackbody radiation (thermal noise).

Noisy white

In telecommunication, the term noisy white has the following meanings:[14]

  1. In facsimile or display systems, such as television, a nonuniformity in the white area of the image, i.e., document or picture, caused by the presence of noise in the received signal.
  2. A signal or signal level that is supposed to represent a white area on the object, but has a noise content sufficient to cause the creation of noticeable black spots on the display surface or record medium.

Noisy black

In telecommunication, the term noisy black has the following meanings:[15]

  1. In facsimile or display systems, such as television, a nonuniformity in the black area of the image, i.e., document or picture, caused by the presence of noise in the received signal.
  2. A signal or signal level that is supposed to represent a black area on the object, but has a noise content sufficient to cause the creation of noticeable white spots on the display surface or record medium.

See also

References

  1. ^ a b c d e f Definition of "noise color" - Rane Pro Audio Reference
  2. ^ Definition of "pink noise" - Federal Standard 1037C
  3. ^ Daniel L. Rudnick, Russ E. Davis (2003). "Red noise and regime shifts". Deep-Sea Research I 50 (6): 691–699. Bibcode 2003DSRI...50..691R. doi:10.1016/S0967-0637(03)00053-0. http://www-pord.ucsd.edu/~rdavis/publications/Red_Noise.pdf. 
  4. ^ Definition of "blue noise" - Federal Standard 1037C
  5. ^ a b Mitchell, Don P., "Generating Antialiased Images at Low Sampling Densities." Computer Graphics, volume 21, number 4, July 1987.
  6. ^ Yellott, John I. Jr., "Spectral Consequences of Photoreceptor Sampling in the Rhesus Retina." Science, volume 221, pp. 382-385, 1983. PMID 6867716
  7. ^ Transactions of the American Society of Heating, Refrigerating and Air-Conditioning Engineers 1968 [1] Quote: 'A "purple noise," accordingly, is a noise the spectrum level of which rises with frequency.'
  8. ^ Estimating double difference GPS multipath under kinematicconditions. Zhang, Q.J. and Schwarz, K.-P.. Position Location and Navigation Symposium, p. 285-291. Apr 1996. 10.1109/PLANS.1996.509090 "The spectral analysis shows that GPS acceleration errors seem to be violet noise processes. They are dominated by high-frequency noise."
  9. ^ Index: Noise (Disciplines of Study [DoS])
  10. ^ http://oak.cats.ohiou.edu/~cuddingt/pubs/proceedings99.pdf
  11. ^ a b c d e Joseph S. Wisniewski (7 October 1996). "Colors of noise pseudo FAQ, version 1.3". comp.dsp. (Web link). Retrieved 2011-03-01. 
  12. ^ Green-Noise Digital Halftoning
  13. ^ Definition of "black noise" - Federal Standard 1037C
  14. ^ Definition of "noisy white" - Federal Standard 1037C
  15. ^ Definition of "noisy black" - Federal Standard 1037C

 This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C".

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Noise (music) — Noise music Stylistic origins Modernism 20th century classical music Electronic art music Musique concrète Electroacoustic music Performance art Free improvisation Cultural origins Early 1910s Europe Typical instruments …   Wikipedia

  • Noise figure — (NF) is a measure of degradation of the signal to noise ratio (SNR), caused by components in a radio frequency (RF) signal chain. The noise figure is defined as the ratio of the output noise power of a device to the portion thereof attributable… …   Wikipedia

  • Noise shaping — is a technique typically used in digital audio, image, and video processing, usually in combination with dithering, as part of the process of quantization or bit depth reduction of a digital signal. Its purpose is to increase the apparent signal… …   Wikipedia

  • Noise (audio) — Noise in audio, recording, and broadcast systems refers to the residual low level sound (usually hiss and hum) that is heard in quiet periods of a programme. In audio engineering, it can refer either to the acoustic noise from loudspeakers, or to …   Wikipedia

  • Noise measurement — is carried out in various fields. In acoustics, it can be for the purpose of measuring environmental noise, or part of a test procedure using white noise, or some other specialised form of test signal. In electronics it relates to the sensitivity …   Wikipedia

  • Noise — This article is about noise as an unwanted phenomenon. For other uses, see Noise (disambiguation). NASA researchers at Glenn Research Center conducting tests on aircraft engine noise in 1967 In common use, the word noise means any unwanted …   Wikipedia

  • Noise temperature — In electronics, noise temperature is one way of expressing the level of available noise power introduced by a component or source. The power spectral density of the noise is expressed in terms of the temperature (in kelvins) that would produce… …   Wikipedia

  • Noise reduction — For sound proofing, see soundproofing. For scientific aspects of noise reduction of machinery and products, see noise control. Noise reduction is the process of removing noise from a signal. All recording devices, both analogue or digital, have… …   Wikipedia

  • Noise (electronics) — Electronic noise [1] is a random fluctuation in an electrical signal, a characteristic of all electronic circuits. Noise generated by electronic devices varies greatly, as it can be produced by several different effects. Thermal noise is… …   Wikipedia

  • Noise floor — This article is about physics term. For the Bright Eyes album, see Noise Floor (Rarities: 1998 2005). In signal theory, the noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”