Morphometrics

Morphometrics

Contents

Morphometrics1 Morphometrics refers to the quantitative analysis of form, a concept that encompasses size and shape. Morphometric analyses are commonly performed on organisms, and are useful in analyzing their fossil record, the impact of mutations on shape, developmental changes in form, covariances between ecological factors and shape, as well for estimating quantitative-genetic parameters of shape. Morphometrics can be used to quantify a trait of evolutionary significance, and by detecting changes in the shape, deduce something of their ontogeny, function or evolutionary relationships. A major objective of morphometrics is to statistically test hypotheses about the factors that affect shape.

"Morphometrics", in the broader sense of the term, is also used to precisely locate certain areas of featureless organs such as the brain,[verification needed] and is used in describing the shapes of other things.

Forms of morphometrics

Three general approaches to form are usually distinguished: traditional morphometrics, landmark-based morphometrics and outline-based morphometrics.

"Traditional" morphometrics

Traditional morphometrics analyzes lengths, widths, masses, angles, ratios and areas (image).[1] In general, traditional morphometric data are measurements of size. A drawback of using many measurements of size is that most will be highly correlated; as a result, there are few independent variables despite the many measurements. For instance, tibia length will vary femur length and also with humerus and ulna length and even with measurements of the head. Traditional morphometric data are nonetheless useful when either absolute or relative sizes are of particular interest, such as in studies of growth. These data are also useful when size measurements are of theoretical importance such as body mass and limb cross-sectional area and length in studies of functional morphology. However, these measurements have one important limitation: they contain little information about the spatial distribution of shape changes across the organism.

Landmark-based geometric morphometrics

In landmark-based geometric morphometrics that spatial information is contained in the data because the data are coordinates of "landmarks": discrete anatomical loci that are arguably homologous in all individuals in the analysis. For example, where sutures intersect is a landmark as are intersections between veins on an insect wing or leaf. So are foramina, small holes through which veins and blood vessels pass. These points can be regarded as the "same" point in all specimens in the study. Landmark-based studies have traditionally analyzed 2D data, but with the increasing availability of 3D imaging techniques, 3D analysis are becoming more feasible even for small structures such as teeth.[2] Finding enough landmarks to provide a comprehensive description of shape can be difficult when working with fossils or easily damaged specimens. That is because all landmarks must be present in all specimens, although coordinates of missing landmarks can be estimated. The data for each individual consists of a configuration of landmarks.

There are three recognized categories of landmarks ([3] ). Type 1 landmarks are locally defined, meaning that they are defined in terms of structures close to that point; for example, an intersection between three sutures, or intersections between veins on an insect wing are locally defined and surrounded by tissue on all sides. Type 3 landmarks, in contrast, are defined in terms of points far away from the landmark, and are often defined in terms of a point "furthest away" from another point. Type 2 landmarks are intermediate; this category includes points such as the tip structure, or local minima and maxima of curvature. They are defined in terms of local features, but they are not surrounded on all sides. In addition to landmarks, there are "semilandmarks," points along a curve. Their position along the curve is arbitrary but these points provide information about curvature in two [4] or three dimensions [5]

Procrustes-based geometric morphometrics

Shape analysis begins by removing the information that is not about shape. By definition, shape is not altered by translation, scaling or rotation.[6] Thus, to compare shapes, the non-shape information is removed from the coordinates of landmarks. There is more than one way to do these three operations. One method is to fix the coordinates of two points to (0,0) and (0,1), which are the two ends of a baseline. In one step, the shapes are translated to the same position (the same two coordinates are fixed to those values), the shapes are scaled (to unit baseline length) and the shapes are rotated[3]. An alternative, and preferred method, is Procrustes superimposition. This method translates the centroid of the shapes to (0,0); the x centroid of the centroid is the average of the x coordinates of the landmarks of an individual, and the y coordinate of the centroid is the average of the y-coordinates. Shapes are scaled to unit centroid size, which is the square root of the summed squared distances of each landmark to the centroid. The configuration is rotated to minimize the deviation between it and a reference, typically the mean shape. In the case of semi-landmarks, variation in position along the curve is also removed. Because shape space is curved, analyses are done by projecting shapes onto a space tangent to shape space. Within the tangent space, conventional multivariate statistical methods such as multivariate analysis of variance and multivariate regression, can be used to test statistical hypotheses about shape.

Procrustes-based analyses have some limitations. One is that the Procrustes superimposition uses a least-squares criterion to find the optimal rotation; consequently, variation that is localized to a single landmark will be smeared out across many. This is called the "“Pinocchio Effect.” Another is that the superimposition may itself impose a pattern of covariation on the landmarks.[7][8] Additionally, any information that cannot be captured by landmarks and semilandmarks cannot be analyzed, including classical measurements like "greatest skull breadth." Moreover, there are criticisms of Procrustes-based methods that motivate an alternative approach to analyzing landmark data.

Euclidean Distance Matrix Analysis

Outline analysis

The results of principal component analysis performed on an outline analysis of some thelodont denticles.

Outline analysis is another approach to analyzing shape. What distinguishes outline analysis is that coefficients of mathematical functions are fitted to points sampled along the outline. There are a number of ways of quantifying an outline. Older techniques such as the "fit to a polynomial curve" [9] and Principal components quantitative analysis [10] have been superseded by the two main modern approaches: eigenshape analysis,[11] and elliptical fourier analysis (EFA),[12] using hand- or computer-traced outlines. The former involves fitting a preset number of semilandmarks at equal intervals around the outline of a shape, recording the deviation of each step from semilandmark to semilandmark from what the angle of that step would be were the object a simple circle.[13] The latter defines the outline as the sum of the minimum number of ellipses required to mimic the shape.[14]

Both methods have their weaknesses; the most dangerous (and easily overcome) is their susceptibility to noise in the outline.[15] Likewise, neither compares homologous points, and global change is always given more weight than local variation (which may have large biological consequences). Eigenshape analysis requires an equivalent starting point to be set for each specimen, which can be a source of error EFA also suffers from redundancy in that not all variables are independent.[15] On the other hand, it is possible to apply them to complex curves without having to define a centroid; this makes removing the effect of location, size and rotation much simpler.[15] The perceived failings of outline morphometrics are that it doesn't compare points of a homologous origin, and that it oversimplifies complex shapes by restricting itself to considering the outline and not internal changes. Also, since it works by approximating the outline by a series of ellipses, it deals poorly with pointed shapes.[16]

One criticism of outline-based methods is that they disregard homology – a famous example of this disregard being the ability of outline-based methods to compare a scapula to a potato chip.[17] Such a comparison which would not be possible if the data were restricted to biologically homologous points. An argument against that critique is that, if landmark approaches to morphometrics can be used to test biological hypotheses in the absence of homology data, it is inappropriate to fault outline-based approaches for enabling the same types of studies [18]

Analyzing data

To display the differences in shape, the data need to be reduced to a comprehensible (low-dimensional) form. Principal component analysis (PCA) is the most commonly employed tool to do this. Simply put, the technique projects as much of the overall variation as possible into a few dimensions. See the figure (upload imminent) for an example. Each axis on a PCA plot is an eigenvector of the covariance matrix of shape variables. The first axis accounts for maximum variation in the sample, with further axes representing further ways in which the samples vary. The pattern of clustering of samples in this morphospace represents similarities and differences in shapes, which can reflect phylogenetic relationships. As well as exploring patterns of variation, Multivariate statistical methods can be used to test statistical hypotheses about factors that affect shape and to visualize their effects.

Landmark data allow the difference between population means, or the deviation an individual from its population mean, to be visualized in at least two ways. One depicts vectors at landmarks that show the magnitude and direction in which that landmark is displaced relative to the others. The second depicts the difference via the thin plate splines, an interpolation function that models change between landmarks from the data of changes in coordinates of landmarks. This function produces what look like deformed grids; where regions that relatively elongated, the grid will look stretched and where those regions are relatively shortened, the grid will look compressed.

Applications

Neuroimaging

In neuroimaging, the most common variants are voxel-based morphometry, deformation-based morphometry and surface-based morphometry of the brain.[clarification needed]

Bone histomorphometry

Histomorphometry of bone involves obtaining a bone biopsy specimen and processing of bone specimens in the laboratory, obtaining estimates of the proportional volumes and surfaces occupied by different components of bone.[19] Obtaining a bone biopsy is accomplished by using a bone biopsy trephine.[20]

Other applications

The application of morphometrics is not restricted to biological uses. It can also be applied to terrain in the form of geomorphometrics. It also has a host of other applications.[verification needed]

Notes

^1 from Greek: "morph," meaning shape or form, and "metron”, measurement

See also

External links

Discussion

Software

  • PAST
  • SHAPE – Elliptic Fourier Descriptors
  • Morphometric software – Archive of many different types of software for use in morphometrics - especially geometric morphometrics.

Bibliography

  • Adams, Dean C.; Michael L. Collyer (2009). "A general framework for the analysis of phenotypic trajectories in evolutionary studies". Evolution 63 (5): 1143–1154. doi:10.1111/j.1558-5646.2009.00649.x. PMID 19210539. 
  • Bookstein, Fred (1991). Morphometric Tools for Landmark Data: Geometry and Biology. Cambridge: Cambridge University Press. ISBN 0521585988. 
  • Cadrin, Steven X. (2000). "Advances in morphometric identification of fishery stocks". Reviews in Fish Biology and Fisheries 10: 91–112. doi:10.1023/A:1008939104413. 
  • Elewa, A.M.T., editor (2004). Morphometrics: Applications In Biology And Paleontology. Berlin: Springer. ISBN 3–540–21429–1. 
  • Klingenberg, C.P.; N. A. Gidaszewski (2010). "Testing and quantifying phylogenetic signals and homoplasy in morphometric data". Systematic Biology 59 (39): 4245–261. 
  • Rohlf, F.J.; D. Slice (1990). "Extensions of the Procrustes method for the optimal superimposition of landmarks". Systematic Zoology 10 (39): 40–59. 

References

  1. ^ Marcus, L. F. (1990). Chapter 4. Traditional morphometrics. In Proceedings of the Michigan Morphometric Workshop. Special Publication No. 2. F. J. Rohlf and F. L. Bookstein. Ann Arbor MI, The University of Michigan Museum of Zoology: 77–122.
  2. ^ Singleton, M.; Rosenberger, A. L., Robinson, C., O'Neill, R. (2011). "Allometric and metameric shape variation in Pan mandibular molars: A digital morphometric analysis". Anatomical Record-Advances in Integrative Anatomy and Evolutionary Biology 294 (2): 322–334. doi:10.1002/ar.21315. 
  3. ^ a b Bookstein, F. L. (1991). Morphometric Tools for Landmark Data: Geometry and Biology. Cambridge: Cambridge University Press. 
  4. ^ Zelditch, M.; Wood, A. R.. Bonnet, R. M., Swiderski, D. L. (2008). "Modularity of the rodent mandible: Integrating muscles, bones and teeth". Evolution & Development 10 (6): 756–768. doi:10.1111/j.1525-142X.2008.00290.x. 
  5. ^ Mitteroecker, P; Bookstein, F.L. (2008). "The evolutionary role of modularity and integration in the hominoid cranium". Evolution 62 (4): 943–958. doi:10.1111/j.1558-5646.2008.00321.x. PMID 18194472. 
  6. ^ Kendall, D.G. (1977). "The diffusion of shape". Advances in Applied Probability 9 (3): 428–430. doi:10.2307/1426091. 
  7. ^ Rohlf, F. J.; Slice, D. (1990). "Extensions of the Procrustes method for the optimal superimposition of landmarks". Systematic Zoology 39 (1): 40–59. doi:10.2307/2992207. 
  8. ^ Walker, J. (2000). "The ability of geometric morphometric methods to estimate a known covariance matrix". Systematic Biology 49 (4): 686–696. doi:10.1080/106351500750049770. PMID 12116434. 
  9. ^ Rogers, Margaret (1982). "A description of the generating curve of bivalves with straight hingess". Palaeontology 25: 109–117. 
  10. ^ Glassburn, T.A. (1995). "A new palaeontological technique describing temporal shape variation in Miocene bivalves". Palaeontology 38: 133–151. 
  11. ^ Lohmann, G.P. (1983). "Eigenshape analysis of microfossils: A general morphometric procedure for describing changes in shape" (PDF). Mathematical Geology 15 (6): 659–672. doi:10.1007/BF01033230. http://www.springerlink.com/index/Q09U01G648273374.pdf. Retrieved 2008-03-10. 
  12. ^ Ferson, S.; Rohlf, F.J.; Koehn, R.K. (1985). "Measuring Shape Variation of Two-Dimensional Outlines". Systematic Zoology 34 (1): 59–68. doi:10.2307/2413345. JSTOR 2413345. 
  13. ^ For an example "in use", see MacLeod, N.; Rose, K.D. (January 1, 1993). "Inferring locomotor behavior in Paleogene mammals via eigenshape analysis" (abstract). American Journal of Science 293 (A): 300. doi:10.2475/ajs.293.A.300. http://www.ajsonline.org/cgi/content/abstract/293/A/300. Retrieved 2008-03-10. 
  14. ^ e.g. Schmittbuhl, M.; Rieger, J.; Le Minor, J.M.; Schaaf, A.; Guy, F. (2007). "Variations of the mandibular shape in extant hominoids: Generic, specific, and subspecific quantification using elliptical fourier analysis in lateral view". American Journal of Physical Anthropology 132 (1): 119. doi:10.1002/ajpa.20476. PMID 17063462. 
  15. ^ a b c Haines, A.J.; Crampton, J.S. (2000). "Improvements To The Method Of Fourier Shape Analysis As Applied In Morphometric Studies". Palaeontology 43 (4): 765–783. doi:10.1111/1475-4983.00148. 
  16. ^ Zelditch, M.L,; Swiderski,D.L., Sheets,H.D., Fink,W.L. (2004). Geometric Morphometrics for Biologists: A Primer. San Diego: Elsevier Academic Press. 
  17. ^ Zelditch, M.; Fink, W. L, Swiderski, D. L (1995). "Morphometrics, homology, and phylogenetics - Quantified characters as synapomorphies". Systematic Biology 44 (2): 179–189. 
  18. ^ MacLeod, N. (1999). "Generalizing and Extending the Eigenshape Method of Shape Space Visualization and Analysis". Paleobiology 25 (1): 107–138. http://links.jstor.org/sici?sici=0094–8373(199924)25%3A1%3C107%3AGAETEM%3E2.0.CO%3B2–2. Retrieved 2008-03-10. 
  19. ^ Revell PA (December 1983). "Histomorphometry of bone". J. Clin. Pathol. 36 (12): 1323–31. doi:10.1136/jcp.36.12.1323. PMC 498562. PMID 6361070. http://www.pubmedcentral.nih.gov/articlerender.fcgi?tool=pmcentrez&artid=498562. 
  20. ^ Hodgson SF; Johnson, KA; Muhs, JM; Lufkin, EG; McCarthy, JT (January 1986). "Outpatient percutaneous biopsy of the iliac crest: methods, morbidity, and patient acceptance". Mayo Clin Proc 61 (1): 28–33. PMID 3941566. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • morphometrics — The form and shape of an animal. Difference in morphometrics is often used to distinguish different stocks of the same species …   Fisheries — dictionary

  • morphometrics — n. [Gr. morphe, form; metron, measurement] Body measurements …   Dictionary of invertebrate zoology

  • morphometrics — noun a) The measurement of shape b) The study of the relationships between the form and function of organisms …   Wiktionary

  • morphometrics — mor·pho·met·rics .mȯr fə me triks n pl 1) MORPHOMETRY 2) morphometric measurements …   Medical dictionary

  • morphometrics — n. method that involves measurement of shape, morphometry …   English contemporary dictionary

  • morphometrics — [ˌmɔ:fə(ʊ) mɛtrɪks] plural noun [usu. treated as sing.] chiefly Biology morphometry, especially of living organisms …   English new terms dictionary

  • morphometrics — …   Useful english dictionary

  • Analyse procustéenne — En statistiques, l analyse procustéenne est une technique pour comparer des formes. Elle est utilisée pour déformer un objet afin de le rendre autant que faire se peut semblable à une référence (potentiellement arbitraire), ne laissant apparaître …   Wikipédia en Français

  • Bioinformatics — For the journal, see Bioinformatics (journal). Map of the human X chromosome (from the NCBI website). Assembly of the human genome is one of the greatest achievements of bioinformatics. Bioinformatics …   Wikipedia

  • Ornithology — This article is about the field of zoology. For the jazz composition, see Ornithology (composition). Part of a series on Zoology …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”