- Danelectro Amp-in-case
-
The Danelectro Amp-In-Case, properly known as Solid-body Electric Guitar with "All-in-one" Amplifier-Case or Silvertone 1448/1449/1451/1452/1457 is a line of guitar sets introduced from 1962 to 1968. It was sold for $67.95 ($466 in 2007 value), sometimes including a 45 rpm how-to-play record, as part of Sears Silvertone. It was later reissued in 2008 in modified form as the "Dano '63". The Dano '63 was also available as a baritone guitar and a bass.
Contents
Amplifier
The amplifier is built into the top-half of the hard-shell guitar case. The first one, the 1448 series, was a simple 3-watt amplifier with 2 tubes plus 1 tube rectifier, 5-inch speaker, and gain control. In 1963, the 1449 series (later renamed 1457) was released, with a 5-watt amplifier with 3 tubes (and 1 tube rectifier) amplifier, with 8-inch speakers, gain, tone, tremolo (speed and strength), 2 inputs, and one foot-switch. The front end of the case has its top half covered in cloth for the speaker. In 1966, the amp-in-case comes with both the non-tremolo version 1451 (modified from 1448) and tremolo version 1452 (modified from 1449). Electronically they are identical, but the speakers are moved to the opposite lid.
The case is 39x15x3 inches. When the guitar is stored inside the case, with the speaker cloth facing upward, the guitar neck would sit on the left side of the amplifier. [1]
Guitar
When first introduced in 1962, the 3/4-sized guitar had a double cutaway semi-hollow body in a shape similar to the well known Fender Stratocaster. The body was composed of a poplar center block and frame with Masonite top and back. It came with a single lipstick pickup at the "middle" position, controlled by a volume and tone knob. The poplar neck was fitted with a Brazilian rosewood fingerboard, and only had 18 frets. The neck connected to the body with three bolts.
By Fall of 1963, there was a two pickup model available. The new model 1449 was the same as its predecessor, but equipped with 2 lipstick pickups and a 21 fret neck. Eventually the semi-hollow guitar models were replaced with solid-body design similar to Danelectro's Dane line.
Reissue
The guitar, minus the amp-in-case, was reissued by Evets Corporation for 2008 as the Dano '63. It is not an exact copy, but updated with modern materials and construction methods[2].
Specifications:
- Body material/construction: Masonite with plywood core. Solid plywood block from neck pocket to bridge. Chambered sides and behind bridge.
- Neck material: Maple with double acting truss rod
- Neck shape: C
- Neck joint: Bolt on
- Scale: 25"
- Number of frets: 19
- Nut width: 1.650”
- Fretboard: Rosewood with pearloid inlays
- Fretboard radius: 14”
- Tuners: High ratio with sealed gears
- Strings: 10-46
- Bridge: Adjustable saddles zero gloss nickel
- Pickups: Lipstick single coil
- Controls: Single volume and tone w/ 3-way toggle pickup selector
- Vinyl side binding tape. Stained for aged appearance.
The Dano '63 was also available as a bass and a baritone guitar.
Reception
The Dano '63 Baritone was reviewed by several guitar magazines, and was well received. Guitar Player praised its clarity and tone[3] and Guitarist magazine awarded it as a "Guitarist Choice."[4] In the May 2008 issue of Guitarist magazine, both of the Dano '63 basses were favorably reviewed, with the long scale being chosen as a "Guitarist Choice."[5]
Notable players
Famous musicians such as Mick Jagger (of the Rolling Stones), and Beck have made use of the Amp-in-case model live on stage, and Dave Grohl owned one as a child[6].
External links
References
- ^ http://www.silvertoneworld.net/amps_60s.html Silvertone world
- ^ Musicradar.com review
- ^ Guitar Player Reviews Seven Baritone Electrics
- ^ Guitarist '63 Baritone review
- ^ Guitarist review
- ^ Interview in Australian Guitar Magazine volume 62
This article relating to guitars is a stub. You can help Wikipedia by expanding it.
