Integral Fast Reactor

Integral Fast Reactor

The Integral Fast Reactor or Advanced Liquid-Metal Reactor is a design for a nuclear fast reactor with a specialized nuclear fuel cycle. A prototype of the reactor was built in the United States, but the project was canceled by the U.S. government in 1994, three years before completion.

The reactors are used in nuclear power plants to produce nuclear power from nuclear fuel.


This reactor is cooled by liquid sodium and fueled by a metallic alloy of uranium and plutonium. The fuel is contained in steel cladding with liquid sodium filling in the space between the fuel and the cladding.


In traditional water-cooled reactors the core must be maintained at a high pressure to keep the water liquid at high temperatures. In contrast, since the IFR used a liquid metal as a coolant, the core could operate at close to ambient pressure, dramatically reducing the danger of a loss of coolant accident. The entire reactor core, heat exchangers and primary cooling pumps were immersed in a pool of liquid sodium, making a loss of primary coolant extremely unlikely. The coolant loops were also designed to allow for cooling through natural convection, meaning that in the case of a power loss or unexpected reactor shutdown, the heat from the reactor core would be sufficient to keep the coolant circulating even if the primary cooling pumps were to fail.

The IFR also utilized a passively safe fuel configuration. The fuel and cladding were designed such that when they expanded due to increased temperatures, more neutrons would be able to escape the core thus reducing the rate of the fission chain reaction. At sufficiently high temperatures this effect would completely stop the reactor even without external action from operators or safety systems. This was demonstrated in a series of safety tests on the prototype.

A safety disadvantage of using liquid sodium as coolant arises due to sodium's chemical reactivity. Liquid sodium is extremely flammable and ignites spontaneously on contact with air or water. Thus leaking sodium pipes could give rise to sodium fires, or explosions if the leaked sodium comes into contact with water. To reduce the risk of explosions following a leak of water from the steam turbines the IFR had an extra intermediate coolant loop between the reactor and the turbines. The purpose of this loop was to ensure that any explosion following accidental mixing of sodium and turbine water would be limited to the secondary heat exchanger and not pose a risk to the reactor. The requirement of such an extra loop significantly added to the cost of the reactor.

Efficiency and Fuel cycle

The goals of the IFR project were to increase the efficiency of uranium usage by breeding plutonium and eliminating the need for transuranic isotopes ever to leave the site. The reactor was an unmoderated design running on fast neutrons, designed to allow any transuranic isotope to be consumed (and in some cases used as fuel).

Compared to current light-water reactors with a once-through fuel cycle that uses less than 1% of the energy in the uranium, the IFR has a very efficient (99.5% usage) fuel cycle. The basic scheme used electrolytic separation to remove transuranics and actinides from the wastes and concentrate them. These concentrated fuels were then reformed, on site, into new fuel elements.

The available fuel metals were never separated from the plutonium, and therefore there was no direct way to use the fuel metals in nuclear weapons. Also, plutonium never had to leave the site, and thus was far less open to unauthorized diversion.

Another important benefit of removing the long half-life transuranics from the waste cycle is that the remaining waste becomes a much shorter-term hazard. After the actinides (reprocessed uranium, plutonium, and minor actinides) are removed and recycled, the remaining radioactive waste isotopes are fission products, which have half lives of either 90 years (Sm-151) and less, or 211,100 years (Tc-99) and more; plus any neutron activation products from the non-fuel reactor components. (Tc-99 and I-129 are also candidates for nuclear transmutation to stable isotopes by neutron capture.)

The result is that within 200 years, such wastes are no more radioactive than the ores of natural radioactive elements. [ An Introduction to Argonne National Laboratory's Integral Fast Reactor (IFR) Program] ]

Key benefits

* Enhanced passive safety because of the high thermal conductivity of the fuel. Able to withstand both a "loss of flow without SCRAM" and "loss of heat sink without SCRAM". In addition to passive shutdown of the reactor, the convection current generated in the primary coolant system will prevent fuel damage (core meltdown). These capabilities were demonstrated in the EBR II. [ The IFR] at Argonne National Laboratory]
* Ease of fuel fabrication. Because the sodium fills the space between the fuel and cladding, the fuel need not be precisely fabricated. The fuel is simply cast. Because casting is simple, the fuel can be fabricated remotely, reducing the hazards of its radioactivity.
* On-site reprocessing by pyroprocessing and electrorefining is simplified because there is no need to stringently reduce the radioactivity of the fuel. Actinides including transuranics can be incorporated into the fuel.
* The IFR's primary fuel is depleted uranium (U-238) mixed with highly enriched uranium and plutonium (perhaps from decommisioned weapons). Because of the IFR's reprocessing capability, the depleted uranium could be replaced by spent fuel (nuclear waste) from traditional water reactors.
* Proliferation hazards are reduced by the high radioactivity of the fuel. Because the fuel contains significant levels of transuranics with high spontaneous fission rates, it is not possible to produce nuclear weapons using IFR fuel without centrifugal separation. This is more difficult than enrichment of natural uranium due to the smaller atomic mass difference between Pu-239 and Pu-240 as compared to U-235 vs U-238, and is rendered even more difficult by the high radioactivity of the fuel.
* The two forms of waste produced, a noble metal form and a ceramic form, contain no plutonium or other actinides. The radioactivity of the waste decays to levels similar to the original ore in about 200 years.
* The on-site reprocessing of fuel means that the quantity of nuclear waste leaving the plant is tiny relative to other nuclear facilities.Estimates from [ Argonne National Laboratory] place the output of waste of a 1000 MWe plant operating at 70% capacity at 1700 pounds/year.] This makes storage simpler and reduces the security risk associated with nuclear waste transportation.

Key disadvantages

* Because the current cost of reactor-grade enriched uranium is low compared to the expected cost of large-scale pyroprocessing and electrorefining equipment and the cost of building a secondary coolant loop, the higher fuel costs of a thermal reactor over the expected operating lifetime of the plant are offset by the increased capital cost of an IFR. (Currently in the United States, utilities pay a flat rate of 1/10 of a cent per kilowatt hour for disposal of high level radioactive waste. If this charge were based on the longevity of the waste, then the IFR might become more financially competitive.)
* Reprocessing nuclear fuel using pyroprocessing and electrorefining has not yet been demonstrated on a commercial scale. As such, investing in a large IFR plant is considered a higher financial risk than a conventional light water reactor.
* The flammability of sodium. Sodium burns easily in air, and will ignite spontaneously on contact with water. The use of an intermediate coolant loop between the reactor and the turbines minimizes the risk of a sodium fire in the reactor core.
* Under neutron bombardment, sodium-24 is produced. This is highly radioactive, emitting an energetic gamma ray of 2.7 MeV followed by a beta decay to form magnesium-24. Half life is only 15 hours, so this isotope is not a long-term hazard - indeed it has medical applications. Nevertheless, the presence of sodium-24 further necessitates the use of the intermediate coolant loop between the reactor and the turbines.


Research on the reactor began in 1984 at Argonne National Laboratory in Argonne, Illinois. Argonne is a part of the U.S. Department of Energy's national laboratory system, and is operated on a contract by the University of Chicago.

Argonne previously had a branch campus named "Argonne West" in Idaho Falls, Idaho that is now part of the Idaho National Laboratory. In the past, at the branch campus, physicists from Argonne had built what was known as the Experimental Breeder Reactor II (EBR II). In the mean time, physicists at Argonne had designed the IFR concept, and it was decided that the EBR II would be converted to an IFR. Charles Till, a Canadian physicist from Argonne, was the head of the IFR project, and Yoon Chang, was the deputy head. Till was positioned in Idaho, while Chang was in Illinois.

With the election of President Bill Clinton in 1992, and the appointment of Hazel O'Leary as the Secretary of Energy, there was pressure from the top to cancel the IFR. Sen. John Kerry (D, MA) and O'Leary led the opposition to the reactor, arguing that it would be a threat to non-proliferation efforts, and that it was a continuation of the Clinch River Breeder Reactor Project that had been canceled by Congress. Despite support for the reactor by then-Rep. Richard Durbin (D, IL) and U.S. Senators Carol Mosley Braun (D, IL) and Paul Simon (D, IL), funding for the reactor was slashed, and it was ultimately canceled in 1994 by [ S.Amdt. 2127 to H.R. 4506] .

See also

*Experimental Breeder Reactor II
*Fast breeder reactor
*Fast neutron reactor
*Sodium-cooled fast reactor
*Lead-cooled fast reactor
*Gas-cooled fast reactor
*Generation IV reactor


External links

* [ The Unofficial IFR home page] and [ (archived) page index]
** [ Introduction]
** [ Integral Fast Reactor]
** [ IFR Metallic Fuel]
** [ Safety Characteristics]
** [ Fuel Cycle Facility]
** [ Fuel Manufacturing Facility]
** [ The IFR Vision]
** [ Reactor Burns Waste as Fuel in Nuclear Recycling Experiment ]
* [ Integral Fast Reactors: Source of Safe, Abundant, Non-Polluting Power] by George S. Stanford, Ph.D.
* [ The IFR] at Argonne National Laboratory
* [ Frontline interview with Dr. Till] .
* [ IFR Q&A with Tom Blees and George Stanford]
* [ The IFR's role in global warming]

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Sodium-cooled fast reactor — The Sodium cooled fast reactor or SFR is a Generation IV reactor project to design an advanced fast neutron reactor.It builds on two closely related existing projects, the LMFBR and the Integral Fast Reactor, with the objective of producing a… …   Wikipedia

  • Lead cooled fast reactor — The lead cooled fast reactor is a nuclear power Generation IV reactor that features a fast neutron spectrum, molten lead or lead bismuth eutectic coolant, and a closed fuel cycle. Options include a range of plant ratings, including a number of 50 …   Wikipedia

  • Fast breeder reactor — The fast breeder or fast breeder reactor (FBR) is a fast neutron reactor designed to breed fuel by producing more fissile material than it consumes. The FBR is one possible type of breeder reactor. The reactors are used in nuclear power plants to …   Wikipedia

  • Fast neutron reactor — [ Shevchenko BN350 nuclear fast reactor and desalination plant situated on the shore of the Caspian Sea. The plant generates 135 MWe and provides steam for an associated desalination plant. View of the interior of the reactor hall.] A fast… …   Wikipedia

  • Reactor reproductor rápido — Saltar a navegación, búsqueda El reactor reproductor rápido (FBR) (del inglés fast breeder reactor) es un reactor de neutrones rápidos diseñado para producir combustible generando más material fisible del que consume. El FBR es uno de los tipos… …   Wikipedia Español

  • Breeder reactor — Assembly of the core of Experimental Breeder Reactor I in Idaho, 1951 A breeder reactor is a nuclear reactor that generates more fissile material in fuel than it consumes.[1] These reactors are considered appealing due to their superior fuel… …   Wikipedia

  • Nuclear reactor — Core of CROCUS, a small nuclear reactor used for research at the EPFL in Switzerland This article is a subarticle of Nuclear power. A nuclear reactor is a device to initiate and control a sustained nuclear chain reaction. Most commonly they are… …   Wikipedia

  • Molten salt reactor — scheme. A molten salt reactor (MSR) is a type of nuclear fission reactor in which the primary coolant, or even the fuel itself is a molten salt mixture. MSRs run at higher temperatures than water cooled reactors for higher thermodynamic… …   Wikipedia

  • Generation IV reactor — Generation IV reactors (Gen IV) are a set of theoretical nuclear reactor designs currently being researched. Most of these designs are generally not expected to be available for commercial construction before 2030, with the exception of a version …   Wikipedia

  • Experimental Breeder Reactor II — There is also a separate, closed, unrelated facility called Experimental Breeder Reactor I .Experimental Breeder Reactor II (EBR II) is a reactor at the Materials and Fuels Complex of the Idaho National Laboratory, formerly the Argonne West… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.