Capacitance probe

Capacitance probe

Capacitance sensors use capacitance to measure the dielectric permittivity of a surrounding medium. One application for such a device is measuring the water content of soil, where the volume of water in the total volume of soil most heavily influences the dielectric permittivity of the soil because the dielectric of water (80) is much greater than the other con­stituents of the soil (mineral soil: 4, organic matter: 4, air: 1). When the amount of water changes in the soil, a probe will measure a change in capacitance due to the change in dielectric permittivity that can be directly correlated with a change in water content.

References

* Dane J.H., Topp G.C, co-editors 2002. "Methods of Soil Analysis Part 4-Physical Methods." Soil Science Society of America, Inc. Madison, Wisconsin.
* Czarnomski N.M., Moore G.W., Pypker T.G., Licata J. 2005. "Precision and accuracy of three alternative instruments for measuring soil water content in two forest soils of the Pacific Northwest". "Canadian Journal of Forest Research" 35, 8, pg. 1867.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Probe effect — is unintended alteration in system behavior caused by measuring that system.In code profiling and performance measurements, the delays introduced by insertion/removal of code instrumentation may result in a non functioning application, or… …   Wikipedia

  • Capacitance — Electromagnetism Electricity · …   Wikipedia

  • Test probe — Typical passive oscilloscope probe being used for testing an integrated circuit. A test probe (test lead, test prod, or scope probe) is a physical device used to connect electronic test equipment to the device under test (DUT). They range from… …   Wikipedia

  • Scanning capacitance microscopy — (SCM) is a variety of scanning probe microscopy in which a narrow probe electrode is held just above the surface of a sample and scanned across the sample. SCM characterizes the surface of the sample using information obtained from the change in… …   Wikipedia

  • Mercury probe — The Mercury Probe is an electrical probing device to make rapid, non destructive contact to a sample for electrical characterization. Its primary application is semiconductor measurements where time consuming metallizations or photolithographic… …   Wikipedia

  • Scanning probe microscopy — Part of a series of articles on Nanotechnology …   Wikipedia

  • Kelvin probe force microscope — Kelvin probe force microscopy ( KPFM ), also known as surface potential microscopy, is a noncontact variant of atomic force microscopy (AFM) that was [http://dns.ntu ccms.ntu.edu.tw/references/APPL PHYS LETT 58 2921 1991.pdf invented] in 1991.… …   Wikipedia

  • Frequency domain sensor — Frequency domain (FD) sensor is an instrument developed for measuring soil moisture content. The instrument has an oscillating circuit, the sensing part of the sensor is embedded in the soil, and the operating frequency will depend on the value… …   Wikipedia

  • List of sensors — * Accelerometer * Touch sensor * Active pixel sensor * Air flow meter * Alarm sensor * Bedwetting alarm * Bhangmeter * Biochip * Biosensor * Breathalyzer * Capacitance probe * Carbon paste electrode * Carbon monoxide detector * Catadioptric… …   Wikipedia

  • Water content — Soil composition by phase: s soil (dry), v void (pores filled with water or air), w water, a air. V is volume, M is mass. Water content or moisture content is the quantity of water contained in a material, such as soil (called soil moisture),… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”