FlyZone Cessna 182 Skylane


FlyZone Cessna 182 Skylane

The FlyZone Cessna 182 Skylane is a beginner- to intermediate-level RTF electric foam park flyer designed, manufactured and distributed by FlyZone, a division of Hobbico, Incorporated of Champaign, Illinois USA.

Introduced in 2006 and officially licensed by Textron Innovations, Incorporated, the parent company of Cessna, the Skylane is based on the company's three-channel, 27 MHz Sky Pilot RTF. In addition, it is FlyZone's first model to feature discrete, standardized 72 MHz electronics and four-channel operation. Many competing products as well as FlyZone's other offerings feature proprietary electronics and 27 MHz operation. Instead, the Skylane features a preinstalled TACTIC TTX400 four-channel FM radio system with six-channel micro-receiver, TACTIC TSC600 15-ampere ESC with low-voltage cutoff and three TACTIC three-wire microservos. Unlike most speed controls which arm only when the throttle is fully off, the TSC600 requires that the throttle lever be moved to full for a count of five and returned to the off position in order to arm. A rare feature in this model's price range is a buddy box system built into the transmitter. The system is compatible only with Futaba and TACTIC brand transmitters and requires the use of the proper Futaba connector cord, sold separately. The transmitter also features servo reversing switches and a charging jack for an optional Futaba nickel cadmium battery pack. Propulsion is via a direct-drive 380-series brushed motor driving an APC-style plastic propeller. Though the motor is a reasonably snug press fit in its cradle, the manufacturer, in an unusual move, uses a pair of rubber bands wrapped around both motor and cradle for added security and, presumably, to prevent breakage to the cradle and/or firewall in the event of a crash. Nylon tie wraps are easily substituted.

Another rarity for a complete RTF in this price range is the fuselage's injection molded foam construction. Similar to the method used by manufacturers such as GWS, UltraFly Model Corporation and Alfa Model, injection molding adds strength, crash resistance and airframe stability. By comparison, a great many products from competitors are constructed of thin, vacuformed foam sheeting with a thin plastic skin, resulting in an airframe which is light in weight but extremely susceptible to damage and subsequently altered flight characteristics. The Skylane's wing and control surfaces are plastic-sheeted foam; the wing is reinforced by plastic struts which triangulate it to the fuselage in the manner of the prototype.

As is the case with most model aircraft in this class, the FlyZone Cessna 182 Skylane is sold as a complete package less 8 AA alkaline batteries for the transmitter. An ElectriFly 8.4V, 1100mAh nickel metal hydride seven-cell battery with JST connectors, 12V DC peak detecting charger and spare propeller are included as is a good quality #1 Phillips screwdriver to aid in final assembly. Final assembly is minimal, requiring little more than the attachment of the vertical stabilizer/rudder and the wing. The battery is retained in its compartment by a ventilated cover.

pecifications

*Wingpsan: 34.8" (880mm)
*Length: 26.5" (675mm)
*Propulsion system: Direct-drive 380-series electric motor
*Propeller: 7x3 plastic with 1" {26mm) plastic spinner and aluminum adapter
*Cowl: Vacuformed ABS plastic
*Wheel pants: Injection molded ABS plastic
*Landing gear: 1.5mm thick aluminum maingear with wire nosegear
*Wheels: Three 1" (25mm) foam tires with two-piece plastic wheels on steel axles
*Radio: TACTIC FM with four proportional and reversible channels for ailerons, elevator, rudder and throttle; ATV is non-adjustable
*Receiver: TACTIC six-channel micro
*ESC: 15A, 6-7 cell Ni-MH compatible TACTIC TSC600 with automatic low-voltage cutoff
*Charger: ElectriFly 12V cigarette lighter-style peak detection
*Trim scheme: White airframe with factory-applied maroon and black paint and decals
*Battery: Seven-cell 7N-J 8.4V 1100mAh Ni-MH with JST connector
*Approximate flying duration: 8 minutes
*Approximate assembly time: 30 minutes
*Center of gravity: Approximately 40mm behind the leading edge of the wing
*Available operating frequencies (North America): Channels 36, 38, 42, 44, 46 and 50 in the 72 MHz band
*Retail/average price (USD): $199/$159

External links and reference

* [http://www.flyzoneplanes.com/airplanes/hcaa23.html Official page at flyzoneplanes.com]
* [http://www.rcuniverse.com/forum/m_5107061/anchors_5456220/mpage_1/key_/anchor/tm.htm#5456220 Discussion thread at rcuniverse.com]
* [http://www.rcgroups.com/forums/showthread.php?t=608191&highlight=flyzone+cessna Discussion thread at rcgroups.com]

----"This article incorporates text from EFlightWiki, the content of which is licensed under the GFDL. Attribution of the source article material is available [http://ww.eme.ca/eflightwiki/index.php?title=FlyZone_Cessna_182_Skylane&action=history here] ."


Wikimedia Foundation. 2010.


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.