Transient-key cryptography


Transient-key cryptography

Transient-key cryptography is a form of public-key cryptography wherein keypairs are generated and assigned to brief intervals of time instead of to individuals or organizations. In a transient-key system, private keys are used briefly and then destroyed, which is why it is sometimes nicknamed “disposable crypto.” Data encrypted with a private key associated with a specific time interval can be irrefutably linked to that interval, making transient-key cryptography particularly useful for digital trusted timestamping.

Public-key vs. transient-key cryptography

Both public-key and transient-key systems can be used to generate digital signatures that assert that a given piece of data has not changed since it was signed. But the similarities end there.In a traditional public key system, the public/private keypair is typically assigned to an individual, server, or organization. Data signed by a private key asserts that the signature came from the indicated source. Keypairs persist for years at a time, so the private component must be carefully guarded against disclosure; in a public-key system, anyone with access to a private key can counterfeit that person’s digital signature. In transient-key systems, however, the keypair is assigned to a brief interval of time, not to a particular person or entity. Data signed by a specific private key becomes associated with a specific time and date. A keypair is active only for a few minutes, after which the private key is permanently destroyed. Therefore, unlike public-key systems, transient-key systems do not depend upon the long-term security of the private keys.

Establishing data integrity with transient-key timestamps

In a transient-key system, the source of time must be a consistent standard understood by all senders and receivers. Since a local system clock may be changed by a user, it is never used as a source of time. Instead, data is digitally signed with a time value derived from Universal Coordinated Time (UTC) accurate to within a millisecond, in accordance with the ANSI ASC X9.95 standard for Trusted Timestamping. Whenever a time interval in a transient-key system expires, a new public/private keypair is generated, and the private key from the previous interval is used to digitally certify the new public key. The old private key is then destroyed. For the new interval, time values are obtained from a trusted third-party source, and specific moments in time can be interpolated in between received times by using a time-biasing method based on the internal system timer. If a trusted time source cannot be obtained or is not running within specified tolerances, transient private keys are not issued. In that case, the time interval chain is terminated, and a fresh one is begun. The old and new chains are connected through network archives, which enable all servers to continue to verify the data integrity through time of protected data, regardless of how often the chain must be restarted.The start times of the chain and of each interval can be coupled together to form an unbroken sequence of public keys, which can be used for the following:
* To irrefutably identify the time at which a set of data was signed.
* To identify the exact state of the data at the time it was signed.As an extra security measure, all requests for signatures made during an interval are stored in a log that is concatenated and is itself appended to the public key at the start of the next interval. This mechanism makes it impossible to insert new “signed events” into the interval chain after the fact.

Cross-verification

Through independently operating servers, cross-certification can provide third-party proof of the validity of a time interval chain and irrefutable evidence of consensus on the current time. A web of interconnected cross-certifying servers in a distributed environment creates a widely witnessed chain of trust that is as strong as its strongest link. By contrast, entire hierarchies of traditional public key systems can be compromised if a single private key is exposed. An individual transient key interval chain can be cross-certified with other transient key chains and server instances. Through cross-certification, Server A signs Server B's interval chain, the signed data of which is the interval definition. In effect, the private keys from Server B are used to sign the public keys of Server A. In the diagram, a server instance is cross-certified with two other server instances (blue and orange).Cross-certification requires that the timestamp for the interval agree with the timestamp of the cross-certifying server within acceptable tolerances, which are user-defined and typically a few hundred milliseconds in duration.

Network archives

Along with intervals, cross-certifications are stored in a network archive. Within a transient-key network, the archive is a logical database that can be stored and replicated on any system to enable verification of data that has been timestamped and signed by transient keys. A map of the set of accessible archives is stored within every digital signature created in the system. Whenever cross-certifications are completed at the beginning of an interval, the archive map is updated and published to all servers in the network.

Verification

During an interval, the transient private key is used to sign data concatenated with trusted timestamps and authenticity certificates. To verify the data at a later time, a receiver accesses the persistent public key for the appropriate time interval. The public key applied to the digital signature can be passed through published cryptographic routines to unpack the hash of the original data, which is then compared against a fresh hash of the stored data to verify data integrity. If the signature successfully decrypts using a particular interval’s published public key, the receiver can be assured that the signature originated during that time period. If the decrypted and fresh hashes match, the receiver can be assured that the data has not been tampered with since the transient private key created the timestamp and signed the data. Transient key cryptography technology was developed by Dr. Michael D. Doyle of [http://www.eolas.com Eolas Technologies Inc.] and later acquired by and productized by [http://www.proofspace.com ProofSpace, Inc] . It is protected under [http://www.freepatentsonline.com/6381696.html US Patent #6,381,696] and has been included in the ANSI ASC X9.95 standard for Trusted Timestamping.
* [http://www.proofspace.com ProofSpace, Inc] has published a more detailed [http://www.proofspace.com/protected_form.php?file=proofmarksystemtech.pdf technical overview document] of transient key cryptography.

External links

* [http://www.freepatentsonline.com/6381696.html US Patent #6,381,696]
* [http://www.techstreet.com/cgi-bin/detail?product_id=1327239 ANSI ASC X9.95 Standard for Trusted Time Stamps]
* [http://www.proofspace.com/protected_form.php?file=proofmarksystemtech.pdf Technical Overview white paper]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • ANSI ASC X9.95 Standard — The ANS X9.95 standard for trusted timestamps expands on the widely used [http://tools.ietf.org/html/rfc3161 RFC 3161 Internet X.509 Public Key Infrastructure Time Stamp Protocol] by adding data level security requirements that can ensure data… …   Wikipedia

  • Eolas — Type Technology Founded 1994 Founder(s) Michael David Doyle Headquarters Tyler, TX, United States …   Wikipedia

  • криптография с переменным ключом — — [http://www.rfcmd.ru/glossword/1.8/index.php?a=index&d=4790] Тематики защита информации EN transient key cryptography …   Справочник технического переводчика

  • One-time pad — Excerpt from a one time pad In cryptography, the one time pad (OTP) is a type of encryption, which has been proven to be impossible to crack if used correctly. Each bit or character from the plaintext is encrypted by a modular addition with a bit …   Wikipedia

  • Trusted timestamping — is the process of securely keeping track of the creation and modification time of a document. Security here means that no one not even the owner of the document should be able to change it once it has been recorded provided that the timestamper s …   Wikipedia

  • IEEE Standards Association — The Institute of Electrical and Electronics Engineers Standards Association (IEEE SA) is a leading developer of global industry standards in a broad range of industries, including:* Power and Energy * Biomedical and Healthcare * Information… …   Wikipedia

  • Mathematics and Physical Sciences — ▪ 2003 Introduction Mathematics       Mathematics in 2002 was marked by two discoveries in number theory. The first may have practical implications; the second satisfied a 150 year old curiosity.       Computer scientist Manindra Agrawal of the… …   Universalium

  • Photon — This article is about the elementary particle of light. For other uses, see Photon (disambiguation). Photon Photons emitted in a coherent beam from a laser Composition Elementary particle …   Wikipedia

  • Technical features new to Windows Vista — This article is part of a series on Windows Vista New features Overview Technical and core system Security and safety Networking technologies I/O technologies Management and administration Removed features …   Wikipedia

  • Randomness — Random redirects here. For other uses, see Random (disambiguation). For a random Wikipedia article, see Special:Random. For information about Wikipedia s random article feature, see Wikipedia:Random. Randomness has somewhat differing meanings as… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.