Binding energy


Binding energy

Binding energy is the mechanical energy required to disassemble a whole into separate parts. A bound system typically has a lower potential energy than its constituent parts; this is what keeps the system together—often this means that energy is released upon the creation of a bound state. The usual convention is that this corresponds to a positive binding energy.

Contents

General

In general, binding energy represents the mechanical work which must be done against the forces which hold an object together, disassembling the object into component parts separated by sufficient distance that further separation requires negligible additional work.

At the atomic level the atomic binding energy of the atom derives from electromagnetic interaction and is the energy required to disassemble an atom into free electrons and a nucleus. Electron binding energy is a measure of the energy required to free electrons from their atomic orbits. This is more commonly known as ionization energy.[1]

At the nuclear level, binding energy is also equal to the energy liberated when a nucleus is created from other nucleons or nuclei.[2][3] This nuclear binding energy (binding energy of nucleons into a nuclide) is derived from the strong nuclear force and is the energy required to disassemble a nucleus into the same number of free unbound neutrons and protons it is composed of, so that the nucleons are far/distant enough from each other so that the strong nuclear force can no longer cause the particles to interact.[4]

In astrophysics, gravitational binding energy of a celestial body is the energy required to expand the material to infinity. This quantity is not to be confused with the gravitational potential energy, which is the energy required to separate two bodies, such as a celestial body and a satellite, to infinite distance, keeping each intact (the latter energy is lower).

In bound systems, if the binding energy is removed from the system, it must be subtracted from the mass of the unbound system, simply because this energy has mass, and if subtracted from the system at the time it is bound, will result in removal of mass from the system.[5] System mass is not conserved in this process because the system is not closed during the binding process.

Mass deficit

Classically a bound system is at a lower energy level than its unbound constituents, and its mass must be less than the total mass of its unbound constituents. For systems with low binding energies, this "lost" mass after binding may be fractionally small. For systems with high binding energies, however, the missing mass may be an easily measurable fraction.

Since all forms of energy exhibit rest mass within systems at "rest" (that is, systems which have no net momentum), the question of where the missing mass of the binding energy goes, is of interest. The answer is that this mass is lost from a system which is not closed. It transforms to heat, light, higher energy states of the nucleus/atom or other forms of energy, but these types of energy also have mass, and it is necessary that they be removed from the system before its mass may decrease. The "mass deficit" from binding energy is therefore removed mass that corresponds with removed energy, according to Einstein's equation E = mc2. Once the system cools to normal temperatures and returns to ground states in terms of energy levels, there is less mass remaining in the system than there was when it first combined and was at high energy. Mass measurements are almost always made at low temperatures with systems in ground states, and this difference between the mass of a system and the sum of the masses of its isolated parts is called a mass deficit. Thus, if binding energy mass is transformed into heat, the system must be cooled (the heat removed) before the mass-deficit appears in the cooled system. In that case, the removed heat represents exactly the mass "deficit", and the heat itself retains the mass which was lost (from the point of view of the initial system). This mass appears in any other system which absorbs the heat and gains thermal energy. [6]

As an illustration, consider two objects attracting each other in space through their gravitational field. The attraction force accelerates the objects and they gain some speed toward each other converting the potential (gravity) energy into kinetic (movement) energy. When either the particles 1) pass through each other without interaction or 2) elastically repel during the collision, the gained kinetic energy (related to speed), starts to revert into potential form driving the collided particles apart. The decelerating particles will return to the initial distance and beyond into infinity or stop and repeat the collision (oscillation takes place). This shows that the system, which loses no energy, does not combine (bind) into a solid object, parts of which oscillate at short distances. Therefore, in order to bind the particles, the kinetic energy gained due to the attraction must be dissipated (by resistive force). Complex objects in collision ordinarily undergo inelastic collision, transforming some kinetic energy into internal energy (heat content, which is atomic movement), which is further radiated in the form of photons—the light and heat. Once the energy to escape the gravity is dissipated in the collision, the parts will oscillate at closer, possibly atomic, distance, thus looking like one solid object. This lost energy, necessary to overcome the potential barrier in order to separate the objects, is the binding energy. If this binding energy were retained in the system as heat, its mass would not decrease. However, binding energy lost from the system (as heat radiation) would itself have mass, and directly represents the "mass deficit" of the cold, bound system.

Closely analogous considerations apply in chemical and nuclear considerations. Exothermic chemical reactions in closed systems do not change mass, but (in theory) become less massive once the heat of reaction is removed. This mass change is too small to measure with standard equipment. In nuclear reactions, however, the fraction of mass that may be removed as light or heat, i.e., binding energy, is often a much larger fraction of the system mass. It may thus be measured directly as a mass difference between rest masses of reactants and products. This is because nuclear forces are comparatively stronger than Coulombic forces associated with the interactions between electrons and protons that generate heat in chemistry.

Mass defect

The difference between the unbound system calculated mass and experimentally measured mass of nucleus is called mass defect. It is denoted by Δm. It can be calculated as follows:

Mass defect = (unbound system calculated mass) - (measured mass of nucleus)
i.e, (sum of masses of protons and neutrons) - (measured mass of nucleus)

In nuclear reactions, the energy that must be radiated or otherwise removed as binding energy may be in the form of electromagnetic waves, such as gamma radiation, or as heat. Again, however, no mass deficit can in theory appear until this radiation has been emitted and is no longer part of the system.

The energy given off during either nuclear fusion or nuclear fission is the difference between the binding energies of the fuel and the fusion or fission products. In practice, this energy may also be calculated from the substantial mass differences between the fuel and products, once evolved heat and radiation have been removed.

When the nucleons are grouped together to form a nucleus, they lose a small amount of mass, i.e., there is mass defect. This mass defect is released as (often radiant) energy according to the relation E = mc2; thus binding energy = mass defect × c2.

This energy is a measure of the forces that hold the nucleons together, and it represents energy which must be supplied from the environment if the nucleus is to be broken up. It is known as binding energy, and the mass defect is a measure of the binding energy because it simply represents the mass of the energy which has been lost to the environment after binding.

In 2005, Rainville et al. published a direct test of the energy-equivalence of mass lost in the binding-energy of a neutron to atoms of particular isotopes of silicon and sulfur, by comparing the new mass-defect to the energy of the emitted gamma ray associated with the neutron capture. The binding mass-loss agreed with the gamma ray energy to a precision of ±0.00004 %, the most accurate test of E=mc2 to date.[7]

Mass excess

It is observed experimentally that the mass of the nucleus is smaller than the number of nucleons each counted with a mass of 1 a.m.u.. This difference is called mass excess.

The difference between the actual mass of the nucleus measured in atomic mass units and the number of nucleons is called mass excess i.e.

Mass excess = M - A = Excess-energy / c2

with : M equals the actual mass of the nucleus, in u.
and : A equals the mass number.

This mass excess is a practical value calculated from experimentally measured nucleon masses and stored in nuclear databases. For middle-weight nuclides this value is negative in contrast to the mass defect which is never negative for any nuclide.

Nuclear binding energy

Electron binding energy

Gravitational binding energy

Bond energy

See also

References

  1. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006–) "Ionization energy".
  2. ^ Brittanica Online Encyclopaedia - "nuclear binding energy". Accessed 8 September 2010. http://www.britannica.com/EBchecked/topic/65615/binding-energy
  3. ^ Nuclear Engineering - "Binding Energy". Bill Garland, McMaster University. Accessed 8 September 2010. http://www.nuceng.ca/igna/binding_energy.htm
  4. ^ Atomic Alchemy: Nuclear Processes - "Binding Energy". About. Accessed 7 September 2010. http://library.thinkquest.org/17940/texts/binding_energy/binding_energy.html
  5. ^ HyperPhysics - "Nuclear Binding Energy". C.R. Nave, Georgia State University. Accessed 7 September 2010. http://hyperphysics.phy-astr.gsu.edu/hbase/nucene/nucbin.html
  6. ^ E. F. Taylor and J. A. Wheeler, Spacetime Physics, W.H. Freeman and Co., NY. 1992. ISBN 0-7167-2327-1, see pp. 248-9 for discussion of mass remaining constant after detonation of nuclear bombs, until heat is allowed to escape.
  7. ^ Rainville, S. et al. World Year of Physics: A direct test of E=mc2. Nature 438, 1096-1097 (22 December 2005) | doi:10.1038/4381096a; Published online 21 December 2005.

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • binding energy — n. 1. the energy needed to separate a system into its constituents, esp. that needed to separate the nucleus of an atom into its neutrons and protons 2. the energy required to remove a particle from the nucleus of an atom 3. the energy required… …   English World dictionary

  • binding energy —  Binding Energy  Энергия связи   Энергия связанной системы каких либо частиц (например, атома), равная работе, которую необходимо затратить, чтобы разложить эту систему на бесконечно удаленные друг от друга и не взаимодействующие между собой… …   Толковый англо-русский словарь по нанотехнологии. - М.

  • binding energy — Physics. 1. Also called separation energy. the energy required to decompose a molecule, atom, or nucleus into its constituent particles, equal to the energy equivalent of the mass defect. 2. the energy required to separate a single particle or… …   Universalium

  • binding energy — ryšio energija statusas T sritis Standartizacija ir metrologija apibrėžtis Darbas, kurio reikia 1 molio medžiagos tam tikriems cheminiams ryšiams nutraukti. atitikmenys: angl. binding energy; bond energy; bonding energy; coupling energy vok.… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • binding energy — ryšio energija statusas T sritis Standartizacija ir metrologija apibrėžtis Surištosios daugelio dal(el)ių sistemos energijos ir tų pačių viena nuo kitos be galo nutolusių ir nejudančių dal(el)ių energijos verčių skirtumas. atitikmenys: angl.… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • binding energy — ryšio energija statusas T sritis chemija apibrėžtis Darbas, kurio reikia 1 molio medžiagos tam tikriems cheminiams ryšiams nutraukti. atitikmenys: angl. binding energy; bond energy; bonding energy rus. энергия связи …   Chemijos terminų aiškinamasis žodynas

  • binding energy — ryšio energija statusas T sritis fizika atitikmenys: angl. binding energy; bond energy; coupling energy vok. Bindungsenergie, f; Kopplungsenergie, f rus. энергия связи, f pranc. énergie de liaison, f …   Fizikos terminų žodynas

  • binding energy — ryšio energija statusas T sritis Energetika apibrėžtis Energija, reikalinga dalelei atskirti nuo branduolio (sistemos) arba branduoliui (sistemai) suskaldyti į sudedamąsias dalis. atitikmenys: angl. binding energy vok. Bindungsenergie, f rus.… …   Aiškinamasis šiluminės ir branduolinės technikos terminų žodynas

  • binding energy — noun the energy required to separate particles from a molecule or atom or nucleus; equals the mass defect • Syn: ↑separation energy • Hypernyms: ↑energy, ↑free energy …   Useful english dictionary

  • binding energy — bind′ing en ergy n. 1) phs the energy required to decompose a molecule, atom, or nucleus into its constituent particles 2) phs the energy required to separate a single particle or group of particles from a molecule, atom, or nucleus • Etymology:… …   From formal English to slang


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.