Performance surface

Performance surface

A performance surface is a flooring suitable for dance or sport. Performance surfaces are normally laid on top of, or are part of, a sprung floor to produce a complete dance floor or sports floor.

Dance performance surfaces made of sheet vinyl are also called dance floors and marley floors. They are called marley type floors from a very popular reversible vinyl flooring manufactured for four years until 1977 by Marley Floors Ltd.[1]

Theatres often have a number of roll-out floors with different characteristics to satisfy the requirements of different forms of dance.

This article deals mainly with the customization of a floor for different activities by the use of different surfaces. The sprung floor article deals with the basic requirements and construction of floors to make them suitable for dance and indoor sports.

Contents

Requirements

The sprung floor article deals with the standard requirements for dance or sports floors. However there are many differences between what would be the best floor for the various disciplines.[2] Most of the customization depends on a choice of suitable performance surface.

The standards listed in the sprung floor article have sections which apply to the performance surface. The standards are applicable to both dance and sport.

These differences are mainly in:

  • The optimum traction e.g. more for sport, less for ballroom dancing
  • The colour of the surface e.g. for theatre or basketball.
  • The sound e.g. for Irish stepdance, tap dance or ballet
  • The softness e.g. for ballet or basketball
  • The durability e.g. for a community hall or for a dance salon

A sprung floor with a hard surface provides protection from serious injuries rather than minor injuries. A fall can still cause bruises. A soft performance surface on the other hand can provide protection from minor injuries but not serious injuries. Providing sufficient protection from serious injury for adults using a thick performance surface alone would render it unsuitable for most dance or sport. This is because a performance surface is point elastic whereas area elasticity as provided by a sprung floor is mainly preferred.

Traction

In general dance requires less traction than gym. However a floor should not of itself be very slippery or sticky. DIN 18032 defines a range of traction which should suit most activities. These type floors should also be smooth, and a slide should not cause carpet burn. This means it is difficult to stop them becoming slippery when wet.[3]

Most of the differences between the different disciplines can and should be catered for by the use of appropriate shoes. On the same surface a dance shoe with a leather or suede sole will give much less traction than a gym shoe with a composite rubber sole. A sticky floor used for gym is very likely to cause twisted ankles, and a slippery floor used for dancing is liable to cause bad falls.

Everyday footwear nowadays tends to have a higher traction. For occasions like weddings where the dancers may not have proper footwear a slightly slippier floor could compensate somewhat, but a highly polished floor can be very dangerous with leather soles. Both gyms and dance clubs are better off providing good safe floors and encouraging the use of proper footwear.

Performance surface construction

The performance surface is normally of vinyl or hardwood, engineered wood or laminate. For dance the surface may be replaceable so for instance a theatre can adapt easily to either ballet or tap dance, these are normally made of vinyl sheeting. Hardwood is however preferred for tap dance.[4] Some sports have extra requirements like spike resistance or a standard ball bounce.[5]

Roll-up vinyl sheeting normally consists of:

  • A thin top wear layer that also has UV light protection. Ultraviolet light rapidly degrades vinyl. This layer has to provide the proper traction and tends to be matte rather than shiny as for domestic vinyl.
  • A layer of vinyl which supports the wear layer. This also provides the main colour.
  • A woven fibre interlayer. This stops the floor deforming and also provides some area elasticity.
  • A bottom layer of foamed vinyl which provides the softness.

When rolled up the vinyl should not be bent sharply - it should be on rolls. When there are a number of different surfaces for a hall these can be kept on special storage carts which keep them separate rather than lying on each other.

What makes a good performance surface

A wood surface is ideal for social dancing if maintained properly and is also standard for many indoor sports. Engineered wood is normally used nowadays for wood flooring as it is less liable to warp or shrink and is more economic. Tap dance is especially punishing and a tough hardwood surface like oak or maple is preferred for any regular use.

Vinyl is a better choice for other types of dance or more general community use. The requirements for different types of dance are different but the differences can mostly be accommodated by changes in the dance surface. For instance Riverdance requires a harder surface that makes a sound, Swan Lake requires a softer surface because of the high jumps and possibility of falls. Ballroom dancing requires less traction than Scottish country dancing.

It used to be difficult to maintain a wood floor properly. However if the directions of the floor manufacturer are followed properly modern treatments will maintain a good surface.[6] It is important not to just trust a commercial office cleaner to know how to do a good job, they should be instructed to follow the directions. There are no cheap and foolproof machines around for measuring traction which would enable cleaners to see their work conforms to dance or sports requirements.[7][8] Thus there is a very strong inclination for managers or cleaners to go for other requirements e.g. a shiny surface or one that resists dirt better.

If a floor is occasionally used for public events, e.g. a gym hall used for a graduation ceremony, then a gym floor cover can be used to protect the floor and ease the normal requirements.

To maintain good traction it is important to stop the floor getting dirty or even slightly wet. A good floor cleaning regime and insisting on sports or dance shoes will help with this. The main protection though is to ensure the hall has industrial grade barrier matting at the entrance. The building should also have a floor grating at the entrance.

References

  1. ^ Entertainment Flooring Systems Frequently Asked Questions
  2. ^ Harlequin article on basic considerations for dance floors
  3. ^ UK Slip resistance group FAQ
  4. ^ National Tap Ensemble: Appropriate Flooring for Tap Dancers
  5. ^ British Sports Council: Floors for Indoor Sports. Design Guidance Note
  6. ^ Bona Sportive System A wood floor maintenance system supporting DIN 18032:2
  7. ^ Assessing the slip resistance of flooring
  8. ^ Ten Myths Concerning Slip-Resistance Measurement

Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Surface photovoltage — (SPV) measurements are a widely used method to determine the minority carrier diffusion length of semiconductors. Since the transport of minority carriers determines the behavior of the p n junctions that are ubiquitous in semiconductor devices,… …   Wikipedia

  • Surface-mount technology — (SMT) is a method for constructing electronic circuits in which the components (SMC, or Surface Mounted Components) are mounted directly onto the surface of printed circuit boards (PCBs). Electronic devices so made are called surface mount… …   Wikipedia

  • surface coating — ▪ chemistry Introduction       any mixture of film forming materials plus pigments, solvents, and other additives, which, when applied to a surface and cured or dried, yields a thin film that is functional and often decorative. Surface coatings… …   Universalium

  • Surface Mining Control and Reclamation Act of 1977 — The Surface Mining Control and Reclamation Act of 1977 (SMCRA) is the primary federal law that regulates the environmental effects of coal mining in the United States.SMCRA created two programs: one for regulating active coal mines and a second… …   Wikipedia

  • Surface Deployment and Distribution Command — US Military Surface Deployment and Distribution Command Surface Deployment and Distribution Command shoulder sleeve insignia Active …   Wikipedia

  • Surface Transportation Board — The Surface Transportation Board [1] of the United States is a bipartisan, decisionally independent adjudicatory body organizationally housed within the U.S. Department of Transportation. The STB was established in 1996 to assume some of the… …   Wikipedia

  • Surface wave — Diving grebe creates surface waves In physics, a surface wave is a mechanical wave that propagates along the interface between differing media, usually two fluids with different densities. A surface wave can also be an electromagnetic wave guided …   Wikipedia

  • Performance énergétique — Efficience énergétique L’efficience énergétique (on emploie très souvent, incorrectement, le terme d’efficacité énergétique) est un état de fonctionnement d’un système pour lequel la consommation d’énergie est minimisée pour un service rendu… …   Wikipédia en Français

  • Surface acoustic wave — A surface acoustic wave (SAW) is an acoustic wave traveling along the surface of a material having some elasticity, with an amplitude that typically decays exponentially with the depth of the substrate. This kind of wave is commonly used in… …   Wikipedia

  • High-performance liquid chromatography — An HPLC. From left to right: A pumping device generating a gradient of two different solvents, a steel enforced column and an apparatus for measuring the absorbance. Acronym HPLC Classification Chromatography …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”