Inch


Inch
1 inch =
SI units
25.400000×10^−3 m 25.4000000 mm
US customary / Imperial units
0.02777778 yd 0.08333333 ft

An inch (plural: inches; abbreviation or symbol: in or ″ – a double prime) is the name of a unit of length in a number of different systems, including Imperial units, and United States customary units. There are 36 inches in a yard and 12 inches in a foot. Corresponding units of area and volume are the square inch and the cubic inch.

Contents

Usage

The inch is one of the most common units of length in the United States, and is also widely used in the United Kingdom, and Canada, despite the introduction of metric to the latter two in the 1960s and 1970s, respectively. The inch is sometimes used informally in other Commonwealth nations, such as Australia.

Measuring tape calibrated in 32nds of an inch

International inch

From July 1, 1959, the United States and countries of the British Commonwealth defined the length of the international yard to be exactly 0.9144 metres.[1][2] Consequently, the international inch is defined as exactly 25.4 millimetres. This creates a slight difference between the international units and American surveyor's units which are described in the article on the foot.

The international standard symbol for inch is in (see ISO 31-1, Annex A). In some cases, the inch is denoted by a double prime, which is often approximated by double quotes, and the foot by a prime, which is often approximated by an apostrophe.

Equivalence to other units of length

Mid-19th century tool for converting between different standards of the inch

1 international inch is equal to:

  • 1,000 thou (also known as mil) (1 mil = 1 thou = 0.001 inches)
  • 1,000,000 microinches (1 μin is one millionth of an inch.)
  • ≈ 0.02778 yards (1 yard is equal to 36 inches.)
  • 2.54 centimetres (1 centimetre ≈ 0.3937 international inches.)

Historical origin

The origin of the inch is disputed. Historically, different parts of the world (even different cities within the same country) and at different points in time, used the word to refer to similar but different standard lengths.

The English word inch comes from Latin uncia meaning "one twelfth part" (in this case, one twelfth of a foot); the word ounce (one twelfth of a troy pound) has the same origin. The vowel change from u to i is umlaut; the consonant change from c (pronounced as k) to ch is palatalization (see Old English phonology).

In some other languages, the word for "inch" is similar to or the same as the word for "thumb"; for example, French: pouce inch/thumb; Italian: pollice inch/thumb; Spanish: pulgada inch, pulgar thumb; Portuguese: polegada inch, polegar thumb; Swedish: tum inch, tumme thumb; Dutch: duim inch/thumb; Sanskrit: angulam inch, anguli finger; Slovak: palec inch/thumb; Hungarian: hüvelyk inch/thumb, Danish and Norwegian: tomme / tommer inch/inches and tommel thumb. Given the etymology of the word "inch", it would seem that the inch is a unit derived from the Foot unit, but this was probably only so in Latin and in Roman times. In English, there are records of fairly precise definitions for the size of an inch (whereas the definitions for the size of a foot are probably anecdotal), so it seems that the foot was then defined as 12 times this length. For example, the old English ynche was defined (by King David I of Scotland in about 1150) as the width of an average man's thumb at the base of the nail, even including the requirement to calculate the average of a small, a medium, and a large man's measures[citation needed]. To account for the much larger length later called an inch, there are also attempts to link it to the distance between the tip of the thumb and the first joint of the thumb, but this may be speculation.

There are records of the unit being used circa AD 1000 (both Laws of Æthelberht and Laws of Ælfred).[citation needed]

An Anglo-Saxon unit of length was the barleycorn. After 1066, 1 inch was equal to 3 barleycorn, which continued to be its legal definition for several centuries, with the barleycorn being the base unit.[3] One of the earliest such definitions is that of 1324, where the legal definition of the inch was set out in a statute of Edward II of England, defining it as "three grains of barley, dry and round, placed end to end, lengthwise".[3]

Similar definitions are recorded in both English and Welsh medieval law tracts.[4] One, dating from the first half of the 10th century, is contained in the Laws of Hywel Dda which superseded those of Dyvnwal, an even earlier definition of the inch in Wales. Both definitions, as recorded in Ancient Laws and Institutes of Wales (vol i., pp. 184,187,189), are that "three lengths of a barleycorn is the inch".[5]

Charles Butler, a mathematics teacher at Cheam School, in 1814 recorded the old legal definition of the inch to be "three grains of sound ripe barley being taken out the middle of the ear, well dried, and laid end to end in a row", and placed the barleycorn, not the inch, as the base unit of the English Long Measure system, from which all other units were derived.[6] John Bouvier similarly recorded in his 1843 law dictionary that the barleycorn was the fundamental measure.[7] Butler observed, however, that "[a]s the length of the barley-corn cannot be fixed, so the inch according to this method will be uncertain", noting that a standard inch measure was now (by his time) kept in the Exchequer chamber, Guildhall, and that was the legal definition of the inch.[6] This was a point also made by George Long in his 1842 Penny Cyclopædia, observing that standard measures had since surpassed the barleycorn definition of the inch, and that to recover the inch measure from its original definition, in the event that the standard measure were destroyed, would involve the measurement of large numbers of barleycorns and taking their average lengths. He noted that this process would not perfectly recover the standard, since it might introduce errors of anywhere between one hundredth and one tenth of an inch in the definition of a yard.[8]

Before the adoption of the international inch (see above), the United Kingdom and most countries of the British Commonwealth defined the inch in terms of the Imperial Standard Yard. But Canada had its own, different, definition of the inch, defined in terms of metric units. The Canadian inch was defined to be equal to 25.4 millimetres, the amount later accepted as the international inch.

Metric or decimal inch

A metric inch (25 mm instead of 25.4 mm) was the equivalent of an inch under a former proposal for the metrification and unification of the English system of measures.

In Sweden, between 1855 to 1863, the existing Swedish "working inch" of ≈24.74 mm was replaced by a "decimal inch" of ≈29.69 mm which was one tenth of the Swedish foot. Proponents argued that a decimal system simplifies calculations. However, having two different Swedish inch measures (and the English inch on top of that) proved to be complicated. So in a transition period between 1878 and 1889 the metric units were introduced as the overall standard measures. However, the various inches survived some time in building and construction trades.

Scottish inch

A Scottish inch (Scottish Gaelic: òirleach) was a Scottish measurement of length. It equals 1/12 ft in Scottish measures, and 1.0016 inches in imperial units (about 2.5441 cm).[9] It was used in the popular expression Gie 'im an inch, an he'll tak an ell, in English "Give him an inch and he'll take an ell", first published as "For when I gave you an inch, you tooke an ell," by John Heywood in 1546.[10] (The ell, equal to 37 inches or about 94 cm, was in use in England until 1824.[citation needed]) A Scottish square inch was equivalent to 1.0256 imperial square inches and 6.4516 square centimetres.

Scottish measures were made obsolete, and English measurements made standard in Scotland, by act of parliament in 1824.


See also

References

  1. ^ Brian Lasater, The Dream of the West (Lulu.com, 2008), p256
  2. ^ "On what basis is one inch exactly equal to 25.4 mm? Has the imperial inch been adjusted to give this exact fit and if so when?". National Physical Laboratory. http://www.npl.co.uk/reference/faqs/on-what-basis-is-one-inch-exactly-equal-to-25.4-mm-has-the-imperial-inch-been-adjusted-to-give-this-exact-fit-and-if-so-when-(faq-length). Retrieved 2010-07-13. 
  3. ^ a b H. Arthur Klein (1974). The world of measurements: masterpieces, mysteries and muddles of metrology. New York: Simon and Schuster. 
  4. ^ Jane Hawkes and Susan Mills (1999). Northumbria's Golden Age. Sutton. pp. 310. ISBN 0750916850. 
  5. ^ John Williams (1867). "The civil arts — mensuration". The Traditionary Annals of the Cymry. Tenby: R. Mason. pp. 243–245. 
  6. ^ a b Charles Butler (1814). An Easy Introduction to the Mathematics. Oxford: Bartlett and Newman. pp. 61. 
  7. ^ John Bouvier (1843). "Barleycorn". A Law Dictionary: With References to the Civil and Other Systems of Foreign Law. Philadelphia: T. & J. W. Johnson. pp. 188. 
  8. ^ George Long (1842). "Weights & Measures, Standard". The Penny Cyclopædia of the Society for the Diffusion of Useful Knowledge. London: Charles Knight & Co.. p. 436. 
  9. ^ "Dictionary of the Scots Language". Edinburgh: Scottish Language Dictionaries. http://www.dsl.ac.uk/getent4.php?plen=333&startset=1811889&query=INCH&fhit=inch&dregion=form&dtext=snds#fhit. Retrieved 2011-05-21. 
  10. ^ Heywood, John (1546). A dialogue conteinying the nomber in effect of all the prouerbes in the englishe tongue, compacte in a matter concernyng two maner of mariages, etc.. London: Thomas Berthelet.  Full text of 1874 reprint
  • Collins Encyclopedia of Scotland
  • Weights and Measures, by D. Richard Torrance, SAFHS, Edinburgh, 1996, ISBN 1-874722-09-9 (NB book focusses on Scottish weights and measures exclusively)
  • This article incorporates text from "Dwelly's [Scottish] Gaelic Dictionary" (1911).
  • Scottish National Dictionary and Dictionary of the Older Scottish Tongue

Wikimedia Foundation. 2010.

Synonyms:

Look at other dictionaries:

  • Inch — Inch, n. [OE. inche, unche, AS. ynce, L. uncia the twelfth part, inch, ounce. See {Ounce} a weight.] [1913 Webster] 1. A measure of length, the twelfth part of a foot, commonly subdivided into halves, quarters, eights, sixteenths, etc., as among… …   The Collaborative International Dictionary of English

  • inch — inch1 [inch] n. [ME inche < OE ynce < L uncia, twelfth part, inch, OUNCE1] 1. a unit of length in the FPS system, equal to 1/ 12 foot (2.54 cm): symbol, ″: abbrev. in 2. a fall (of rain, snow, etc.) equal to the amount that would cover a… …   English World dictionary

  • Inch — 〈[ ı̣ntʃ] m. od. n.; , es; bei Maßangaben Pl.: ; Abk.: in.; 〉 engl. Längenmaß, Zoll, 2,54 cm [engl.] * * * Inch [ɪnt̮ʃ], der; [es], es […t̮ʃɪs] <aber: 4 Inch[es]> [engl. inch, aengl. ynce < lat. uncia, ↑ 1Unze]: Längeneinheit in… …   Universal-Lexikon

  • inch — [ɪntʆ] noun [countable] a unit for measuring length, equal to 2.54 centimetres * * * Ⅰ. inch UK US /ɪnʃ/ noun [C] (abbreviation in., symbol ʺ) ► MEASURES a unit of measure equal to one twelfth of a foot or 2.54 centimetres: » …   Financial and business terms

  • inch — ► NOUN 1) a unit of linear measure equal to one twelfth of a foot (2.54 cm). 2) a quantity of rainfall that would cover a horizontal surface to a depth of one inch. 3) a very small amount or distance: don t yield an inch. ► VERB ▪ move along… …   English terms dictionary

  • Inch —    INCH, a parish, in the county of Wigton, 2½ miles (E.) from Stranraer; containing, with the hamlets of Aird, Cairnryan, and Lochans, 2950 inhabitants. This place, which is of great antiquity, and distinguished for its lochs, appears to have… …   A Topographical dictionary of Scotland

  • Inch — Inch, a. Measuring an inch in any dimension, whether length, breadth, or thickness; used in composition; as, a two inch cable; a four inch plank. [1913 Webster] {Inch stuff}, boards, etc., sawed one inch thick. [1913 Webster] …   The Collaborative International Dictionary of English

  • inch — inch·er; inch·ling; inch·ma·ree; inch·meal; inch; mi·cro·inch; mil·inch; …   English syllables

  • inch — s.m. Unitate de măsură pentru lungime, egală cu 2,54 cm, folosită în Anglia şi în Statele Unite ale Americii. [pr.: inci] – cuv. engl. Trimis de valeriu, 25.11.2008. Sursa: DEX 98  inch (unitate de măsură pentru lungime) s. m. [pron. engl. inci] …   Dicționar Român

  • Inch — Inch, v. i. To advance or retire by inches or small degrees; to move slowly; as, to inch forward. [1913 Webster] With slow paces measures back the field, And inches to the walls. Dryden. [1913 Webster] …   The Collaborative International Dictionary of English

  • inch — n a unit of length equal to 1/36 yard or 2.54 centimeters * * * (in) (inch) a unit of linear measure, one twelfth of a foot, being the equivalent of 2.54 cm …   Medical dictionary


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.