# Inverse function

﻿
Inverse function

In mathematics, if &fnof; is a function from "A" to "B" then an inverse function for &fnof; is a function in the opposite direction, from "B" to "A", with the property that a round trip (a composition) from "A" to "B" to "A" (or from "B" to "A" to "B") returns each element of the initial set to itself. Thus, if an input "x" into the function ƒ produces an output "y", then inputting "y" into the inverse function ƒ–1 produces the output "x". Not every function has an inverse; those that do are called invertible.

For example, let &fnof; be the function that converts a temperature in degrees Celsius to a temperature in degrees Fahrenheit::$f\left(C\right) = frac95 C + 32 ; ,!$then its inverse function converts degrees Fahrenheit to degrees Celsius::$f^\left\{-1\right\}\left(F\right) = frac59 \left(F - 32\right) . ,!$

Or, suppose &fnof; assigns each child in a family of three the year of its birth. An inverse function would tell us which child was born in a given year. However, if the family has twins (or triplets) then we cannot know which to name for their common birth year. As well, if we are given a year in which no child was born then we cannot name a child. But if each child was born in a separate year, and if we restrict attention to the three years in which a child was born, then we do have an inverse function. For example,:

Definitions

Let ƒ be a function whose domain is the set "X", and whose range is the set "Y". Then, if it exists, the inverse of ƒ is the function ƒ–1 with domain "Y" and range "X", defined by the following rule::$ext\left\{If \right\}f\left(x\right) = y ext\left\{, then \right\}f^\left\{-1\right\}\left(y\right) = x ext\left\{.\right\},!$

Stated otherwise, a function is invertible if and only if its inverse relation is a function, in which case the inverse relation is the inverse function: the inverse relation is the relation obtained by switching "x" and "y" everywhere.

Thus, an inverse function uniquely identifies the input "x" of another function based only on its output "y", for all "y" &isin; "Y". A function is invertible if and only if this rule defines a function. Not all functions have an inverse. For this rule to be applicable, each element "y" &isin; "Y" must correspond to exactly one element "x" &isin; "X". This is generally stated as two conditions:
* Every $y in Y$ corresponds to no more than one $x in X$; a function ƒ with this property is called one-to-one, or information-preserving, or an injection.
* Every $y in Y$ corresponds to at least one $x in X$; a function ƒ with this property is called onto, or a surjection.

In elementary mathematics, the domain is often assumed to be the real numbers, if not otherwise specified, and the range is assumed to be the image.

Most functions encountered in elementary calculus do not have an inverse. [Smith, William K. "Inverse Functions", MacMillan, 1966 (p. 60).]

Example: square root

The function ƒ("x") = "y" = "x"2 may or may not be invertible, depending on the domain and codomain.

If the domain is the real numbers, then each element in "Y" would correspond to two different elements in "X" (±"x"), and therefore ƒ would not be invertible. More precisely, the square of "x" is not invertible because it is impossible to deduce from its output the sign of its input. Such a function is called non-injective or information-losing. Notice that neither the square root nor the principal square root function is the inverse of "x"2 because the first is not single-valued, and the second returns -"x" when "x" is negative.

If the domain and codomain are both the non-negative numbers, then it is invertible, by the principal square root.

If the domain is the non-negative numbers, but the codomain is all reals, then again, it is not invertible, because negative numbers are not squares of a real number.

Inverses in higher mathematics

The definition given above is commonly adopted in calculus. In higher mathematics, the notation:$fcolon X o Y ,!$means "ƒ is a function mapping elements of a set "X" to elements of a set "Y". The source, "X", is called the domain of ƒ, and the target, "Y", is called the codomain. The codomain contains the range of ƒ as a subset, and is considered part of the definition of ƒ.

When using codomains, the inverse of a function nowrap| ƒ: "X" → "Y" is required to have domain "Y" and codomain "X". For the inverse to be defined on all of "Y", every element of "Y" must lie in the range of the function ƒ. A function with this property is called onto or a surjection. Thus, a function with a codomain is invertible if and only if it is both one-to-one and onto. Such a function is called a one-to-one correspondence or a bijection, and has the property that every element nowrap| "y" &isin; "Y" corresponds to exactly one element nowrap| "x" &isin; "X".

Inverses and composition

If ƒ is an invertible function with domain "X" and range "Y", then

:$f^\left\{-1\right\}left\left( , f\left(x\right) , ight\right) = x ext\left\{, for every \right\}x in X ext\left\{.\right\}$

This statement is equivalent to the first of the above-given definitions of the inverse, and it becomes equivalent to the second definition if Y coincides with the codomain of ƒ. Using the composition of functions we can rewrite this statement as follows:

:$f^\left\{-1\right\} circ f = mathrm\left\{id\right\}_X ext\left\{,\right\}$

where id"X" is the identity function on the set "X". In category theory, this statement is used as the definition of an inverse morphism.

If we think of composition as a kind of multiplication of functions, this identity says that the inverse of a function is analogous to a multiplicative inverse. This explains the origin of the notation ƒ–1.

Note on notation

The superscript notation for inverses can sometimes be confused with other uses of superscripts, especially when dealing with trigonometric and hyperbolic functions.

It is important to realize that ƒ–1(x) is not the same as ƒ(x)–1. In ƒ−1("x"), the superscript "−1" is not an exponent. A similar notation is used in dynamical systems for iterated functions. For example, ƒ2 denotes two iterations of the function ƒ; if nowrap|1= ƒ("x") = "x" + 1, then nowrap|1=ƒ2("x") = ("x" + 1) + 1, or "x" + 2. In symbols:: $f^2\left(x\right) = f\left(f\left(x\right)\right) = \left(f circ f\right)\left(x\right).$

In calculus, ƒ("n"), with parentheses, denotes the "n"th derivative of a function ƒ. For instance:: $f^\left\{\left(2\right)\right\}\left(x\right) = frac\left\{d^\left\{2\left\{dx^\left\{2f\left(x\right).$

In trigonometry, for historical reasons, sin2("x") usually "does" mean the square of sin("x"):

:$sin^2 x = \left(sin x\right)^2. ,!$

However, the expression sin-1("x") "does not" represent the multiplicative inverse to sin("x"):

:$sin^\left\{-1\right\} x eq \left(sin x\right)^\left\{-1\right\}. ,!$

It denotes the inverse function for sin("x") (actually a partial inverse; see below). To avoid confusion, an inverse trigonometric function is often indicated by the prefix "arc". For instance the inverse sine is typically called the arcsine:

:$sin^\left\{-1\right\} x = arcsin x = mathrm\left\{asin\right\}, x. ,!$

The function nowrap| (sin "x")–1 is the multiplicative inverse to the sine, and is called the cosecant. It is usually denoted csc "x"::$\left(sin x\right)^\left\{-1\right\} = frac\left\{1\right\}\left\{sin x\right\} = csc x . ,!$

Properties

Uniqueness

If an inverse function exists for a given function ƒ, it is unique: it must be the inverse relation.

ymmetry

There is a symmetry between a function and its inverse. Specifically, if the inverse of ƒ is ƒ–1, then the inverse of ƒ–1 is the original function ƒ. In symbols:

:

This follows because invertion of relations is an involution: if you repeat it, you get back to where you started.

This statement is an obvious consequence of the above-explained deduction that, for ƒ to be invertible, it must be injective (first definition of the inverse) or bijective (second definition). The property of symmetry can be concisely expressed by the following formula:

:$left\left(f^\left\{-1\right\} ight\right)^\left\{-1\right\} = f . ,!$

Inverse of a composition

The inverse of a composition of functions is given by the formula:$\left(f circ g\right)^\left\{-1\right\} = g^\left\{-1\right\} circ f^\left\{-1\right\}$Notice that the order of ƒ and "g" have been reversed; to undo "g" followed by ƒ, we must first undo ƒ and then undo "g".

For example, let nowrap|1= ƒ("x") = "x" + 5, and let nowrap|1= "g"("x") = 3"x". Then the composition nowrap| ƒ o "g" is the function that first multiplies by three and then adds five::$\left(f circ g\right)\left(x\right) = 3x + 5$To reverse this process, we must first subtract five, and then divide by three::$\left(f circ g\right)^\left\{-1\right\}\left(y\right) = frac13\left(y - 5\right)$This is the composition nowrap| ("g"–1 o ƒ–1) ("y").

elf-inverses

If "X" is a set, then the identity function on "X" is its own inverse:

:$mathrm\left\{id\right\}_X^\left\{-1\right\} = mathrm\left\{id\right\}_X$

More generally, a function nowrap| ƒ: "X" → "X" is equal to its own inverse if and only if the composition nowrap| ƒ o ƒ is equal to id"x". Such a function is called an involution.

Inverses in calculus

Single-variable calculus is primarily concerned with functions that map real numbers to real numbers. Such functions are often defined through formulas, such as::$f\left(x\right) = \left(2x + 8\right)^3 . ,!$A function ƒ from the real numbers to the real numbers possesses an inverse as long as it is one-to-one, i.e. as long as the graph of the function passes the horizontal line test.

The following table shows several standard functions and their inverses::

Formula for the inverse

One approach to finding a formula for ƒ–1, if it exists, is to solve the equation nowrap|1= "y" = ƒ("x") for "x". For example, if ƒ is the function

:$f\left(x\right) = \left(2x + 8\right)^3 ,!$

then we must solve the equation nowrap|1= "y" = (2"x" + 8)3 for "x":

:

Thus the inverse function ƒ–1 is given by the formula

:$f^\left\{-1\right\}\left(y\right) = dfrac\left\{sqrt \left[3\right] \left\{y\right\} - 8\right\}\left\{2\right\} . ,!$

Sometimes the inverse of a function cannot be expressed by a formula. For example, if ƒ is the function

:$f\left(x\right) = x + sin x , ,!$

then ƒ is one-to-one, and therefore possesses an inverse function ƒ–1. There is no simple formula for this inverse, since the equation nowrap|1= "y" = "x" + sin "x" cannot be solved algebraically for "x".

Graph of the inverse

If ƒ and ƒ–1 are inverses, then the graph of the function

:$y = f^\left\{-1\right\}\left(x\right),!$

is the same as the graph of the equation

:$x = f\left(y\right) . ,!$

This is identical to the equation nowrap|1= "y" = ƒ("x") that defines the graph of ƒ, except that the roles of "x" and "y" have been reversed. Thus the graph of ƒ–1 can be obtained from the graph of ƒ by switching the positions of the "x" and "y" axes. This is equivalent to reflecting the graph across the linenowrap|1= "y" = "x".

Inverses and derivatives

A continuous function ƒ is one-to-one (and hence invertible) if and only if it is either strictly increasing or decreasing (with no local maxima or minima). For example, the function

:$f\left(x\right) = x^3 + x,!$

is invertible, since the derivativenowrap|1= ƒ&prime;("x") = 3"x"2 + 1 is always positive.

If the function ƒ is differentiable, then the inverse ƒ–1 will be differentiable as long as nowrap| ƒ&prime;("x") &ne; 0. The derivative of the inverse is given by the inverse function theorem::$frac\left\{d\right\}\left\{dy\right\}left \left[ f^\left\{-1\right\}\left(y\right) ight\right] = frac\left\{1\right\}\left\{f\text{'}left\left(f^\left\{-1\right\}\left(y\right) ight\right)\right\} .$If we set nowrap|1= "x" = ƒ–1("y"), then the formula above can be written:$frac\left\{dx\right\}\left\{dy\right\} = frac\left\{1\right\}\left\{dy / dx\right\} .$This result follows from the chain rule (see the article on inverse functions and differentiation).

The inverse function theorem can be generalized to functions of several variables. Specifically, a differentiable function nowrap| ƒ: R"n"R"n" is invertible in a neighborhood of a point "p" as long as the Jacobian matrix of ƒ at "p" is invertible. In this case, the Jacobian of ƒ–1 at ƒ("p") is the matrix inverse of the Jacobian of ƒ at "p".

Generalizations

Partial inverses

Even if a function ƒ is not one-to-one, it may be possible to define a partial inverse of ƒ by restricting the domain. For example, the function

:$f\left(x\right) = x^2,!$

is not one-to-one, since nowrap|1= "x"2 = (–"x")2. However, the function becomes one-to-one if we restrict to the domain nowrap| "x" &ge; 0, in which case

:$f^\left\{-1\right\}\left(y\right) = sqrt\left\{y\right\} .$

(If we instead restrict to the domain nowrap| "x" &le; 0, then the inverse is the negative of the square root of "x".) Alternatively, there is no need to restrict the domain if we are content with the inverse being a multivalued function:

:$f^\left\{-1\right\}\left(y\right) = pmsqrt\left\{y\right\} .$

Sometimes this multivalued inverse is called the full inverse of ƒ, and the portions (such as &radic;"x" and −&radic;"x") are called branches. The most important branch of a multivalued function (e.g. the positive square root) is called the principal branch, and its value at "y" is called the principal value of ƒ–1("y").

For a continuous function on the real line, one branch is required between each pair of local extrema. For example, the inverse of a cubic function with a local maximum and a local minimum has three branches (see the picture to the right).

These considerations are particularly important for defining the inverses of trigonometric functions. For example, the sine function is not one-to-one, since

:$sin\left(x + 2pi\right) = sin\left(x\right),!$

for every real "x" (and more generally nowrap|1= sin("x" + 2&pi;"n") = sin("x") for every integer "n"). However, the sine is one-to-one on the intervalnowrap| [–&pi;&frasl;2, &pi;&frasl;2] , and the corresponding partial inverse is called the arcsine. This is considered the principal branch of the inverse sine, so the principal value of the inverse sine is always between –&pi;&frasl;2 and &pi;&frasl;2. The following table describes the principal branch of each inverse trigonometric function::

Left and right inverses

If ƒ: "X" → "Y", a left inverse for ƒ (or retraction of ƒ) is a function nowrap| "g": "Y" → "X" such that

:$g circ f = mathrm\left\{id\right\}_X . ,!$

That is, the function "g" satisfies the rule

:$ext\left\{If \right\}f\left(x\right) = y ext\left\{, then \right\}g\left(y\right) = x . ,!$

Thus, "g" must equal the inverse of ƒ on the range of ƒ, but may take any values for elements of "Y" not in the range. A function ƒ has a left inverse if and only if it is injective.

A right inverse for ƒ (or section of ƒ) is a function nowrap| "h": "Y" → "X" such that

:$f circ h = mathrm\left\{id\right\}_Y . ,!$

That is, the function "h" satisfies the rule

:$ext\left\{If \right\}h\left(y\right) = x ext\left\{, then \right\}f\left(x\right) = y . ,!$

Thus, "h"("y") may be any of the elements of "x" that map to "y" under ƒ. A function ƒ has a right inverse if and only if it is surjective (though constructing such an inverse in general requires the axiom of choice).

An inverse which is both a left and right inverse must be unique; otherwise not. Likewise, if "g" is a left inverse for &fnof; then &fnof; may not be a right inverse for "g"; and if &fnof; is a right inverse for "g" then "g" is not necessarily a left inverse for &fnof;.

=Pre

If ƒ: "X" → "Y" is any function (not necessarily invertible), the preimage (or inverse image) of an element nowrap| "y" &isin; "Y" is the set of all elements of "X" that map to "y":

:$f^\left\{-1\right\}\left(y\right) = left\left\{ xin X : f\left(x\right) = y ight\right\} . ,!$

The preimage of "y" can be thought of as the image of "y" under the (multivalued) full inverse of the function "f".

Similarly, if "S" is any subset of "Y", the preimage of "S" is the set of all elements of "X" that map to "S":

:$f^\left\{-1\right\}\left(S\right) = left\left\{ xin X : f\left(x\right) in S ight\right\} . ,!$

The preimage of a single element nowrap| "y" &isin; "Y" is sometimes called the fiber of "y". When "Y" is the set of real numbers, it is common to refer to ƒ–1("y") as a level set.

ee also

* Inverse trigonometric function
* Logarithm
* Inverse function theorem
* Inverse functions and differentiation
* Inverse relation
* Inverse element

References

Bibliography

* Citation
last = Stewart
first = James
date = 2002
title = Calculus
publisher = Brooks Cole
edition = 5th
isbn = 978-0534393397

Wikimedia Foundation. 2010.

### Look at other dictionaries:

• inverse function — n. the function obtained by expressing the independent variable of another function in terms of the dependent variable which is then regarded as an independent variable …   English World dictionary

• inverse function — noun a function obtained by expressing the dependent variable of one function as the independent variable of another; f and g are inverse functions if f(x)=y and g(y)=x (Freq. 1) • Hypernyms: ↑function, ↑mathematical function, ↑single valued… …   Useful english dictionary

• inverse function — Math. the function that replaces another function when the dependent and independent variables of the first function are interchanged for an appropriate set of values of the dependent variable. In y = sin x and x = arc sin y, the inverse function …   Universalium

• inverse function — noun A function that does exactly the opposite of another; formally the inverse function of a function exists such that: . Halving is the inverse function of doubling …   Wiktionary

• inverse function — noun Date: 1816 a function that is derived from a given function by interchanging the two variables < y = ∛x is the inverse function of y = x3 > compare logarithmic function …   New Collegiate Dictionary

• inverse function — /ɪnvɜs ˈfʌŋkʃən/ (say invers fungkshuhn) noun the mathematical function which replaces another function when the dependent and independent variables of the first function are interchanged. If y is a trigonometrical ratio of the angle x, as y =… …   Australian English dictionary

• inverse function — atvirkštinė funkcija statusas T sritis fizika atitikmenys: angl. inverse function vok. inverse Funktion, f rus. обратная функция, f pranc. fonction inverse, f …   Fizikos terminų žodynas

• inverse function — function which is reached by expressing the dependent variable of one function as the independent variable of another (Mathematics) …   English contemporary dictionary

• inverse function — in′verse func′tion n. math. math. the function that replaces another function when the dependent and independent variables of the first function are interchanged for an appropriate set of values of the dependent variable • Etymology: 1810–20 …   From formal English to slang

• Inverse function theorem — In mathematics, specifically differential calculus, the inverse function theorem gives sufficient conditions for a function to be invertible in a neighborhood of a point in its domain. The theorem also gives a formula for the derivative of the… …   Wikipedia