Axle load

Axle load

On railways, the axle load is the maximum weight of a train per pair of wheels allowable for a given section of track. The maximum axle load is related to the strength of the track, which is determined by weight of rails, density of sleepers and fixtures, train speeds, amount of ballast, and strength of bridges. Because track and especially the rails are expensive, it is desirable to optimise the track for a given axle load. If the track is overloaded by trains that are too heavy, it can be destroyed in a short time. It is convenient for the steelworks that rails are made in a limited number of sizes, so that a perfect match of rail weight and axle load is rarely achieved. New rail is often reserved for heavy main line use, which releases good but lighter rail that can be cascaded for lighter duties on branch lines. The lightest rail cascaded from the lightest branch lines may have no railway use other that for structural items such as fenceposts, telegraph posts and for reinforcing concrete.

United Kingdom

Track

Light railways were built with rail weighing as little as 30 lb/yard but main lines used much heavier rail. On former British Rail lines the rail is mostly 90 lb/yard or 120 lb/yard.

Locomotives

In British Rail days most diesel locomotives were built to a maximum axle load of 19 tons (19.3 tonnes) so the maximum locomotive weight was 76 tons (77.2 tonnes) for a four-axle locomotive and 114 tons (115.8 tonnes) for a six-axle one. Higher axle loads are now permitted, e.g. the Class 67 locomotive is a four-axle machine weighing 90 tonnes, giving 22.5 tonnes on each axle.

Australia

Example 1

The new branch line from Blackwater, Queensland to Rolleston is being built in 2005 to haul the following:
* rail: 50 kg/m — (choice limited to 50 kg/m or 60 kg/m)
* sleepers: concrete
* sleepers per kilometre : unknown
* max speed: 80 km/h
* wagon axle load: 26 t
* locomotive axle load: 20 t
* swingnose crossings at turnouts: unknown
* traffic: 8 Mt/yr
* length of line: 110 km
* cost of line: US$185.5 million
* see IRJ May 2005

Roads

The term axle load is also applicable to trucks which is complicated by the fact that trucks may have more than two wheels per axle.

ee also

* Rail profile
* Gross axle weight rating

External links

* [http://www.railwaygazette.com/news_view/article/2007/06/47/managing-rail-degradation-on-the-malmbanan.html Managing rail degradation on the Malmbanan] , Thomas Nordmark and Dr Per-Olof Larsson-Kraik, "Railway Gazette International" June 2007.


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • axle load — noun : the load of a vehicle applied through the wheels at both ends of an axle and equaling twice the wheel load …   Useful english dictionary

  • axle load — See axle weight …   Dictionary of automotive terms

  • load — [1] something to be lifted, carried, transported, or accelerated. [2] The amount of material transported. [3] The amount of power carried by an electric circuit. [4] The resistance overcome by an engine when it is driving a machine. Also see axle …   Dictionary of automotive terms

  • Axle — For other uses, see Axle (disambiguation). Not to be confused with Axl (disambiguation) or Axel (disambiguation). Train wheels are affixed to a straight axle, such that both wheels rotate in unison. This is called a wheelset. An axle is a… …   Wikipedia

  • load distribution calculation — The payload on the front axle is equal to the total payload multiplied by the load base (in inches) and divided by the wheelbase (in inches). To complete the calculation of load per axle, it is necessary to obtain the unladen weight of the… …   Dictionary of automotive terms

  • load base — Used in calculating load distribution; it is the distance between the center of the rear axle (or center between tandem axles) and the center of payload. Also See negative load base …   Dictionary of automotive terms

  • load transference — The changing of the amount of load distributed to each axle while the vehicle is in motion, due to the effects of braking, cornering ascending, or descending grades, etc. See rollsteer …   Dictionary of automotive terms

  • Load Sensing Proportioning Valve — (LSPV) a hydraulic system control valve that works like a proportioning valve, but also takes into consideration the amount of weight carried by the rear axle …   Dictionary of automotive terms

  • load-sensitive proportioning valve — A valve which regulates hydraulic pressure to the rear wheels as a function of chassis height to axle distance. A vehicle weight transfer during hard braking increases this distance and, via a spring or rod linkage, will close the valve to reduce …   Dictionary of automotive terms

  • Military Load Classification — The Military Load Classification (MLC) is a system of standards used by NATO and the United States Department of Defense to classify the safe amount of load a surface can withstand. Load carrying capacity are shown in whole numbers for vehicles,… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”