Debye-Hückel equation

Debye-Hückel equation

The Debye-Hückel limiting law, named for its developers Peter Debye and Erich Hückel, provides one way to obtain activity coefficients Ref|Harris. Activities, rather than concentrations, are needed in many chemical calculations because solutions that contain ionic solutes do not behave ideally even at very low concentrations. The activity is proportional to the concentration by a factor known as the activity coefficient gamma , , and takes into account the interaction energy of ions in the solution.

In order to calculate the activity of an ion in a solution, one must know the concentration and the activity coefficient, gamma ,. The activity of some ion species C, a_C ,, is equal to a dimensionless measure of the concentration of C, [C] , multiplied by the activity coefficient of C, gamma ,.

: a_C = gamma frac{ [C] }{ [C_{Theta}] },:: [C_{Theta}] , represents the concentration of the chosen "standard state", e.g. 1 mol/kg if we work in molality.

The "Debye-Hückel limiting law" enables one to determine the activity coefficient of an ion in a "dilute" solution of known ionic strength. The equation is (Hamann, Hamnett, and Vielstich. Electrochemistry. Wiley-VCH. section 2.5.2)

:log(gamma_i) = - frac {z_i^2 q^2 kappa}{8 pi varepsilon_r varepsilon_0 k_B T} = - frac{z_i^2 q^3}{4 pi (varepsilon_r varepsilon_0 k_B T)^{3/2 sqrt{frac{I}{2= - A z_i^2 sqrt{I}::z_i is the charge number of ion species i::q is the elementary charge::kappa is the Debye screening length, defined below::varepsilon_r is the relative permittivity of the solvent::varepsilon_0 is the permittivity of free space::k_B is Boltzmann's constant::T is the temperature of the solution::I is is the ionic strength of the solution, defined below::A is a constant that depends on the solvent. If I is expressed in terms of molality, instead of molarity (as in the equation above and in the rest of this article), then an experimental value for A is 1.172 mbox{mol}^{-1/2} mbox{kg}^{1/2}.

It is important to note that because the ions in the solution act together, the activity coefficient obtained from this equation is actually a mean activity coefficient.

ummary of Debye & Hückel's first paper on the theory of dilute electrolytes

The English title of the paper is called "On the Theory of Electrolytes. I. Freezing Point Depression and Related Phenomena." It was originally published in volume 24 of a German-language journal, called Physikalische Zeitschrift, in 1923. An English translationcite book
title=The Collected Papers of Peter J. W. Debye
publisher=Interscience Publishers, Inc.
place=New York, New York
year=1954
] rp|217-63of the paper is included in a book of collected papers presented to Debye by "his pupils, friends, and the publishers on the occasion of his seventieth birthday on March 24, 1954."rp|xv The paper deals with the calculation of properties of electrolyte solutions that are not under the influence of net electric fields, thus it deals with electrostatics.

In the same year they first published this paper, Debye and Hückel, hereinafter D&H, also released a paper that covered their initial characterization of solutions under the influence of electric fields called "On the Theory of Electrolytes. II. Limiting Law for Electric Conductivity," but that subsequent paper is not (yet) covered here.

In the following summary (as yet incomplete and unchecked), modern notation and terminology are used, from both chemistry and mathematics, in order to prevent confusion. Also, with a few exceptions to improve clarity, the subsections in this summary are (very) condensed versions of the same subsections of the original paper.

Introduction

D&H note that the Guldberg-Waage formula for electrolyte species in chemical reaction equilibrium in classical form isrp|221

: prod_{i=1}^{s} x_{i}^{ u_i} = K

:: extstyle prod is a notation for multiplication::i is a dummy variable indicating the species::s is the number of species participating in the reaction::x_i is the mole fraction of species i:: u_i is the stoichiometric coefficient of species i::K is the equilibrium constant

D&H say that, due to the "mutual electrostatic forces between the ions," it is necessary to modify the Guldberg-Waage equation by replacing K with gamma K, where gamma is an overall activity coefficient, not a "special" activity coefficient (a separate activity coefficient associated for each species)—which is what is used in modern chemistry as of 2007.

The relationship between gamma and the special activity coefficients, gamma_i isrp|248

:log( gamma ) = sum_{i=1}^{s} u_i log( gamma_i ).

Fundamentals

D&H use the Helmholtz and Gibbs free entropies, Phi and Xi, to express the effect of electrostatic forces in an electrolyte on its thermodynamic state. Specifically, they split most of the thermodynamic potentials into classical and electrostatic terms.

:Phi = S - frac {U} {T} = - frac{A}{T}

::Phi is Helmholtz free entropy::S is entropy::U is internal energy::T is temperature::A is Helmholtz free energy

D&H give the total differential of Phi asrp|222

:d Phi = frac {P} {T} d V + frac {U} {T^2} d T

::P is pressure::V is volume

By the definition of the total differential, this means that

:: frac {P} {T} = frac { partial Phi } {partial V} and

:: frac {U} {T^2} = frac { partial Phi } {partial T},

which are useful further on.

As stated previously, the internal energy is divided into two parts,rp|222

: U = U_k + U_e

::k indicates the classical part::e indicates the electric part

Similarly, the Helmholtz free entropy is also divided into two parts,

: Phi = Phi_k + Phi_e

D&H state, without giving the logic, thatrp|222

: Phi_e = int frac {U_e}{T^2} d T

It would seem that, without some justification,

: Phi_e = int frac {P_e} {T} d V + int frac {U_e}{T^2} d T.

Without mentioning it specifically, D&H later give what might be the required (above) justification while arguing that Phi_e = Xi_e, an assumption that the solvent is incompressible.

The definition of the Gibbs free entropy, Xi, isrp|222-3

Xi = S - frac {U + P V} {T} = Phi - frac {P V}{T} = - frac {G}{T}.

::G is Gibbs free energy

D&H give the total differential of Xi asrp|222

:d Xi = -frac {V} {T} d P + frac {U + P V} {T^2} d T.

At this point D&H note that, for water containing 1 mole per liter of potassium chloride (nominal pressure and temperature aren't given), the electric pressure, P_e, amounts to 20 atmospheres. Furthermore, they note that this level of pressure gives a relative volume change of 0.001. Therefore, they neglect change in volume of water due to electric pressure, writingrp|223

:Xi = Xi_k + Xi_e

and put

:Xi_e = Phi_e = int frac {U_e}{T^2} d T.

D&H say that, according to Planck, the classical part of the Gibbs free entropy isrp|223

:Xi_k = sum_{i=0}^s N_i (xi_i - k_B ln (x_i)).::i is a species::s is the number of different particle types in solution::N_i is the number of particles of species i::xi_i is the particle specific Gibbs free entropy of species i::k_B is Boltzmann's constant::x_i is the mole fraction of species i

Species zero is the solvent. The definition of xi_i is as follows, where lower case letters indicate the particle specific versions of the the corresponding extensive properties:rp|223

: xi_i = s_i - frac {u_i + P v_i} {T}.

D&H don't say so, but the functional form for Xi_k may be derived from the functional dependence of the chemical potential of a component of an ideal mixture upon its mole fraction.cite web |url=http://www.chem.arizona.edu/~salzmanr/480a/480ants/mixpmqis/mixpmqis.html |title=Mixtures; Partial Molar Quantities; Ideal Solutions |accessdate=2007-10-23 |last=Salzman |first=William R. |date=2001-08-21 |work=Chemical Thermodynamics |publisher=University of Arizona |language=English |archiveurl=http://web.archive.org/web/20070607142802/http://www.chem.arizona.edu/~salzmanr/480a/480ants/mixpmqis/mixpmqis.html |archivedate=2007-06-07]

D&H note that the internal energy, U, of a solution is lowered by the electrical interaction of its ions, but that this effect can't be determined by using the crystallographic approximation for distances between dissimilar atoms (the cube root of the ratio of total volume to the number of particles in the volume). This is because there is more thermal motion in a liquid solution than in a crystal. The thermal motion tends to smear out the natural lattice that would otherwise be constructed by the ions. Instead, D&H introduce the concept of an ionic cloud. Like the crystal lattice, each ion still attempts to surround itself with oppositely charged ions, but in a more free-form manner; at small distances away from positive ions, one is more likely to find negative ions and vice versa.rp|225

The Potential Energy of an Arbitrary Ion Solution

Electroneutrality of a solution requires thatrp|233

:sum_{i=1}^s N_i z_i = 0.::N_i is the total number of ions of species i in the solution::z_i is the charge number of species i

To bring an ion of species i, initially far away, to a point P within the ion cloud requires interaction energy in the amount of z_i q varphi, where q is the elementary charge and varphi is the value of the scalar electric potential field at P. If electric forces were the only factor in play, the minimum energy configuration of all the ions would be achieved in a close-packed lattice configuration. However, the ions are in thermal equilibrium with each other and they are relatively free to move. Thus they obey Boltzmann statistics and form a Boltzmann distribution. All species' number densities, n_i, are altered from their bulk (overall average) values, n^{0}_i, by the corresponding Boltzmann factor, e^{-frac{z_i q varphi}{k_B T, where k_B is the Boltzmann constant and T is the temperature (http://www.pma.caltech.edu/Courses/ph136/yr2006/text.html, section 19.3). Thus,rp|233

:n_i = frac {N_i}{V} e^{-dfrac{z_i q varphi}{k_B T = n^{0}_i e^{-dfrac{z_i q varphi}{k_B T::V is the volume of the solution

at every point in the cloud. Note that in the infinite temperature limit, all ions are distributed uniformly, with no regard for their electrostatic interactions.rp|227

The charge density is related to the number density:rp|233

: ho=sum_i z_i q n_i = sum_i z_i q n^{0}_i e^{-frac{z_i q varphi}{k_B T.

When combining this result for the charge density with the Poisson equation from electrostatics, a form of the Poisson-Boltzmann equation results:rp|233

:{ abla}^2 varphi = -frac{ ho}{varepsilon_r varepsilon_0} = - sum_i frac {z_i q n^{0}_i}{varepsilon_r varepsilon_0} e^{-frac{z_i q varphi}{k_B T.

This equation is difficult to solve and does not follow the principle of linear superposition for the relationship between the number of charges and the strength of the potential field. However, for sufficiently low concentrations of ions, a first order Taylor series approximation for the exponential function may be used (e^x = 1+x for 0 < x ll 1) to create a linear differential equation (Hamann, Hamnett, and Vielstich. Electrochemistry. Wiley-VCH. section 2.4.2). D&H say that this approximation holds at large distances between ions,rp|227 which is the same as saying that the concentration is low. Lastly, they claim without proof that the addition of more terms in the expansion has little effect on the final solution.rp|227 Thus,

:-sum_i frac{z_i q n^{0}_i}{varepsilon_r varepsilon_0} e^{-frac{z_i q varphi}{k_B T approx -sum_i frac{z_i q n^{0}_i}{varepsilon_r varepsilon_0} (1-frac{z_i q varphi}{k_B T})=-(sum_i frac{z_i q n^{0}_i}{varepsilon_r varepsilon_0}-sum_i frac{z_i^2 q^2 n^{0}_i varphi}{varepsilon_r varepsilon_0 k_B T}).

The Poisson-Boltzmann equation is transformed torp|233

:{ abla}^2 varphi = sum_i frac{z_i^2 q^2 n^{0}_i varphi}{varepsilon_r varepsilon_0 k_B T},

because the first summation is zero due to electroneutrality.rp|234

Factor out the scalar potential and assign the leftovers, which are constant, to kappa^2. Also, let I be the ionic strength of the solution:rp|234

:kappa^2 = sum_i frac{z_i^2 q^2 n^{0}_i}{varepsilon_r varepsilon_0 k_B T} = frac{2 I q^2}{varepsilon_r varepsilon_0 k_B T},

:I = frac {1}{2} sum_i z_i^2 n^{0}_i.

So, the fundamental equation is reduced to a form of the Helmholtz equation:(http://guava.physics.uiuc.edu/~nigel/courses/569/Essays_2004/files/lu.pdf section 3.1)

:{ abla}^2 varphi = kappa^2 varphi.

Today, kappa^{-1} is called the Debye screening length. D&H recognize the importance of the parameter in their paper and characterize it as a measure of the thickness of the ion atmosphere, which is (in this paper) an electrical double layer of the Helmholtz type.rp|229

The equation may be expressed in spherical coordinates by taking r=0 at some arbitrary ion (http://hyperphysics.phy-astr.gsu.edu/hbase/electric/laplace.html):rp|229

:{ abla}^2 varphi = frac {1}{r^2} frac {partial }{partial r} left ( r^2 frac {partial varphi(r)}{partial r} ight )= frac{part^2 varphi(r) }{partial r^2} + frac{2}{r} frac{part varphi(r) }{partial r} = kappa^2 varphi(r).

The equation has the following general solution; keep in mind that kappa is a positive constant:rp|229

:varphi(r) = A frac{e^{-sqrt {kappa^2} r{r} + A' frac{e^{sqrt {kappa^2} r{2 r sqrt {kappa^2 = A frac{e^{-kappa r{r} + A" frac{e^{kappa r{r} = A frac{e^{-kappa r{r}.::A, A', and A" are undetermined constants

The electric potential is zero at infinity by definition, so A" must be zero.rp|229

In the next step, D&H assume that there is a certain radius, a_i, beyond which no ions in the atmosphere may approach the (charge) center of the singled out ion. This radius may be due to the physical size of the ion itself, the sizes of the ions in the cloud, and any water molecules that surround the ions. Mathematically, they treat the singled out ion as a point charge to which one may not approach within the radius a_i.rp|231

The potential of a point charge by itself is:

:varphi_{pc}(r) = {1 over 4 pi varepsilon_r varepsilon_0}{z_i q over r}.

D&H say that the total potential inside the sphere isrp|232

:varphi_{sp}(r) = varphi_{pc}(r) + B_i = {1 over 4 pi varepsilon_r varepsilon_0}{z_i q over r} + B_i,

where B_i is a constant that represents the potential added by the ionic atmosphere. No justification for B_i being a constant is given. However, one can see that this is the case by considering that any spherical static charge distribution is subject to the mathematics of the shell theorem. The shell theorem says that no force is exerted on charged particles inside a sphere (of arbitrary charge) (http://hyperphysics.phy-astr.gsu.edu/hbase/electric/potsph.html). Since the ion atmosphere is assumed to be (time-averaged) spherically symmetric, with charge varying as a function of radius r, it may be represented as an infinite series of concentric charge shells. Therefore, inside the radius a_i, the ion atmosphere exerts no force. If the force is zero, then the potential is a constant (by definition).

In a combination of the continuously distributed model which gave the Poisson-Boltzmann equation and the model of the point charge, it is assumed that at the radius a_i, there is a continuity of varphi(r) and its first derivative. Thus,rp|232

:varphi(a_i) = A_i frac{e^{-kappa a_i{a_i} = {1 over 4 pi varepsilon_r varepsilon_0}{z_i q over a_i} + B_i = varphi_{sp}(a_i),:varphi'(a_i) = -frac{A_i e^{-kappa a_i} (1 + kappa a_i)}{a_i^2} = - {1 over 4 pi varepsilon_r varepsilon_0}{z_i q over a_i^2} = varphi_{sp}'(a_i),:A_i = frac {z_i q}{4 pi varepsilon_r varepsilon_0} frac{e^{kappa a_i{1 + kappa a_i}, and:B_i = -frac{z_i q kappa}{4 pi varepsilon_r varepsilon_0} frac {1}{1 + kappa a_i}.

By the definition of electric potential energy, the potential energy associated with the singled out ion in the ion atmosphere isrp|230 & 232

:u_i = z_i q B_i = -frac{z_i^2 q^2 kappa}{4 pi varepsilon_r varepsilon_0} frac {1}{1 + kappa a_i}

Notice that this only requires knowledge of the charge of the singled out ion and the potential of all the other ions.

To calculate the potential energy of the entire electrolyte solution, one must use the multiple charge generalization for electric potential energy.rp|230 & 232

:U_e = frac {1}{2} sum_{i=1}^s N_i u_i = - sum_{i=1}^s frac {N_i z_i^2}{2} frac{q^2 kappa}{4 pi varepsilon_r varepsilon_0} frac {1}{1 + kappa a_i}

The Additional Electric Term to the Thermodynamic Potential

Nondimensionalization

This section was created without reference to the original paper and there are some errors in it (for instance, the ionic strength is off by a factor of two). Once these are rectified, this section should probably be moved to the nondimensionalization article and then be linked from here, since the nondimensional version of the Poisson-Boltzmann equation isn't necessary to understand the D&H theory.

The differential equation is ready for solution (as stated above, the equation only holds for low concentrations):

:frac{part^2 varphi(r) }{partial r^2} + frac{2}{r} frac{part varphi(r) }{partial r} = frac{I q varphi(r)}{varepsilon_r varepsilon_0 k_b T} = kappa^2 varphi(r)

Using the Buckingham π theorem on this problem results in the following dimensionless groups:

:pi_1 = frac{q varphi(r)}{k_b T} = Phi(R(r)):pi_2 = varepsilon_r:pi_3 = frac{a k_b T varepsilon_0}{q^2}:pi_4 = a^3 I:pi_5 = z_0:pi_6 = frac{r}{a} = R(r)

Phi is called the reduced scalar electric potential field. R is called the reduced radius. The existing groups may be recombined to form two other dimensionless groups for substitution into the differential equation. The first is what could be called the square of the reduced inverse screening length, (kappa a)^2. The second could be called the reduced central ion charge, Z_0 (with a capital Z). Note that, though z_0 is already dimensionless, without the substitution given below, the differential equation would still be dimensional.

:frac{pi_4}{pi_2 pi_3} = frac{a^2 q^2 I}{varepsilon_r varepsilon_0 k_b T} = (kappa a)^2

:frac{pi_5}{pi_2 pi_3} = frac{z_0 q^2}{4 pi a varepsilon_r varepsilon_0 k_b T} = Z_0

To obtain the nondimensionalized differential equation and initial conditions, use the pi groups to eliminate varphi(r) in favor of Phi(R(r)), then eliminate R(r) in favor of r while carrying out the chain rule and substituting {R^prime}(r) = a, then eliminate r in favor of R (no chain rule needed), then eliminate I in favor of (kappa a)^2, then eliminate z_0 in favor of Z_0. The resulting equations are as follows:

:frac{partial Phi(R) }{partial R}igg|_{R=1} = - Z_0

:Phi(infty) = 0

:frac{part^2 Phi(R) }{part R^2} + frac{2}{R} frac{part Phi(R) }{part R} = (kappa a)^2 Phi(R)

For table salt in 0.01 M solution at 25°C, typical a typical value of (kappa a)^2 is 0.0005636, while a typical value of Z_0 is 7.017, highlighting the fact that, in low concentrations, (kappa a)^2 is a target for a zero order of magnitude approximation such as perturbation analysis. Unfortunately, because of the boundary condition at infinity, regular perturbation does not work. The same boundary condition prevents us from finding the exact solution to the equations. Singular perturbation may work, however.

Extensions of the theory

Warning: The notation in this section is (presently) different than in the rest of the article.

A number of approaches have been proposed to extend the validity of the law to concentration ranges as commonly encountered in chemistry

One such Extended Debye-Hückel Equation is given by:

: - log(gamma) = frac{A|z_+z_-|sqrt{mu{1 + Basqrt{mu ,

where gamma , as its common logarithm is the activity coefficient, z, is the integer charge of the ion (1 for H+, 2 for Mg2+ etc.), mu , is the ionic strength of the aqueous solution, and a , is the size or effective diameter of the ion in angstrom. The effective hydrated radius of the ion, a is the radius of the ion and its closely bound water molecules. Large ions and less highly charged ions bind water less tightly and have smaller hydrated radii than smaller, more highly charged ions. Typical values are 3Å for ions such as H+,Cl-,CN-, and HCOO-. The effective diameter for the hydronium ion is 9Å. A , and B , are constants with values of respectively 0.5085 and 0.3281 at 25°C in water Ref|Skoog.

The Extended Debye-Hückel Equation provides accurate results for μ ≤ 0.1 M. For solutions of greater ionic strengths, the Pitzer equation should be used. In these solutions the activity coefficient may actually increase with ionic strength.

The Debye-Hückel Equation cannot be used in the solutions of surfactants where the presence of micelles influences on the electrochemical properties of the system (even rough judgement overestimates γ for ~50%).

ee also

*Strong electrolyte
*Weak electrolyte
*Ionic atmosphere

External links

* [http://twt.mpei.ac.ru/MAS/Worksheets/Debye-Huckel.mcd Debye-Hückel coefficient on-line calculation] For easy calculation of activity coefficients in (non-micellar) solutions, check out the [http://www.iupac.org/projects/2000/2000-003-1-500.html IUPAC open project Aq-solutions] (freeware)"'.
* Gold Book [http://www.iupac.org/goldbook/D01534.pdf definition]

References

* cite journal
author=P. Debye and E. Hückel
title=The theory of electrolytes. I. Lowering of freezing point and related phenomena
journal=Physikalische Zeitschrift
year=1923
volume=24
pages=185–206

*cite book
last = Harris
first = Daniel C.
title = Quantitative Chemical Analysis
edition = 6th edition
publisher = W. H. Freeman & Company
year = 2003
id = ISBN 0-7167-4464-3

*cite book
last = Skoog
first = Douglas A.
title = Fundamentals of Analytical Chemistry
id = ISBN 0534417965


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Debye–Hückel equation — The Debye–Hückel equation and Debye–Hückel limiting law, were derived by Peter Debye and Erich Hückel, who developed a theory with which to calculate activity coefficients of electrolyte solutions.[1] Activities, rather than concentrations, are… …   Wikipedia

  • Debye-Hückel equation — ▪ chemistry       a mathematical expression derived to elucidate certain properties of solutions of electrolytes, that is, substances present in the solutions in the form of charged particles (ions (ionization)). Such solutions often behave as if …   Universalium

  • Debye–Hückel theory — The Debye–Hückel theory was proposed by Peter Debye and Erich Hückel as a theoretical explanation for departures from ideality in solutions of electrolytes.[1] It was based on an extremely simplified model of the electrolyte solution but… …   Wikipedia

  • Équation de Debye–Hückel — Demande de traduction Debye–Hückel equation → …   Wikipédia en Français

  • Hückel — or Huckel may refer to:* Debye Hückel equation, a method of calculating acitivty coefficients * Erich Hückel, German physicist and chemist * Hückel method, a method for the determination of energies of molecular orbitals ** Extended Hückel method …   Wikipedia

  • Debye length — In plasma physics, the Debye length (also called Debye radius), named after the Dutch physicist and physical chemist Peter Debye, is the scale over which mobile charge carriers (e.g. electrons) screen out electric fields in plasmas and other… …   Wikipedia

  • Equation de Poisson-Boltzmann — Équation de Poisson Boltzmann Pour les articles homonymes, voir Poisson (homonymie). L équation de Poisson Boltzmann est une équation qui apparaît dans la théorie de Debye Huckel des solutions ioniques. Cette équation permet de calculer le… …   Wikipédia en Français

  • Équation de poisson-boltzmann — Pour les articles homonymes, voir Poisson (homonymie). L équation de Poisson Boltzmann est une équation qui apparaît dans la théorie de Debye Huckel des solutions ioniques. Cette équation permet de calculer le potentiel électrostatique créé par… …   Wikipédia en Français

  • Équation de Poisson-Boltzmann — Pour les articles homonymes, voir Poisson (homonymie). L équation de Poisson Boltzmann est une équation qui apparaît dans la théorie de Debye Huckel des solutions ioniques. Cette équation permet de calculer le potentiel électrostatique créé par… …   Wikipédia en Français

  • Équation de Davies — L équation de Davies est une extension empirique de l Équation de Debye–Hückel qui peut être utilisée pour calculer le coefficient d activités d une solution électrolyte de concentration relativement élevée. L équation, publiée en 1938[1], a été… …   Wikipédia en Français

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”