Dummy head recording

Dummy head recording
Dummy head being used for binaural recording; the second microphone is obscured.

In acoustics, dummy head recording (also known as artificial head or Kunstkopf) is a method used to make binaural recordings, that allow a listener wearing headphones to perceive the directionality and the room acoustics of single or multiple sources.

Human perception of the direction of a sound source is complex, and consists of:

  1. Simple "left-right" information can be gained from relative level differences and time of arrival differences of the sound in each ear.
  2. For percussive sounds, the impact of a shock wave can register perceptibly on the skin (typically the upper torso), with the earliest and strongest sensory stimulus coming from the regions of skin aligned perpendicular to the direction of the sound source.
  3. The human head imprints frequency-dependent distortions of phase and amplitude on sound reaching the eardrums, that are frequency-dependent level differences and these distortion effects vary with the direction of the sound source (being caused by the geometry and sound-transmitting characteristics of the sinus and throat cavities, eustachian tubes, inner ear, external ears, and other hard and soft tissues in the head and upper body (see: head-related transfer function, "HRTF").

Conventional stereo recording only makes use of left-right information. Dummy head recording uses both left-right information and frequency-dependent distortions.

Contents

Methods

There are three main ways of making a recording that uses this last effect to encode directionality information:

  1. dummy head recording uses an artificial model of a human head, built from selected acoustic materials to emulate the sound-transmitting characteristics of a real human head, with two microphone inserts embedded at the "eardrum" locations,
  2. simulated dummy head recording processes a signal electronically to imprint the HRTF information associated with a specified direction, and
  3. finally, a pair of specially-designed microphones can be worn by a volunteer, fitted inside their ears, to make use of actual intra-cranial acoustics.

Limitations

Because each person's pinnae are unique, and because the filtering they impose on sound directionality is learned by each person from early childhood, the use of pinnae during recording that are not the same as the ultimate listener may lead to perceptual confusion.[1][verification needed]

History

Historically, dummy head recordings have been associated with the use of a physical synthetic head, the "Kunstkopf". The "head" could be placed in a concert hall to make a live orchestral recording, or actors could stand around the head when recording their dialogue. The head could also be used to imprint positional information on prerecorded sound effects by playing sounds through a loudspeaker placed in a suitable position by the head, and rerecording the result (for instance, it might be desirable for birdsong or thunder to seem to be coming from above the listener; this would not be achievable using conventional methods).

In the 1990s, electronic devices were made commercially available that used DSP processing power to reproduce an HRTF digitally. These devices allowed the operator to use dials to adjust the apparent direction of sounds in real time. They were unusual and expensive, but allowed an operator to "position" pre-recorded special effects quickly and conveniently, and also to move sound sources dynamically. By manipulating the dials, the sound engineer could take a monophonic recording of a passing car and make it sound to the listener as if it were passing behind them in a particular direction. With a "physical" dummy head, this would have also required a rerecording booth, and either a single moving loudspeaker or an array of speakers and some sort of multiple panning or switching device.

As portable digital recorders (using DAT and minidisc formats) became more popular, a market also arose for miniature "in-ear" microphones such as the Sound Professionals SP-TFB-2 that could be "worn" by the operator inside their own ears to make "dummy head" recordings. Since these devices look like personal stereo "earbuds", they can be worn unobtrusively and are especially useful for making "audience" recordings of concerts and other live events, or for recording "ambient" sounds (such as birdsong, or traffic noises, or crowd sounds) with a realistic three-dimensional soundfield, which can later be mixed in together with more conventional recordings. A convincing radio play scene with two characters talking in a railway station could then be created by recording the actors in the studio, using in-ear microphones to record ambient "railway station" noises, and then mixing the two together. The disadvantage of the "in-ear" method for recording important events is that the wearer cannot wear earphones to monitor the recording, cannot receive audible instructions (without these being recorded), and cannot turn or dip their head without affecting the recording. They also have to be careful not to cough or clear their throat while recording.

Another problem with "in-ear" recording is that the effectiveness of the effect depends partly on the degree of correspondence between the properties of the recordist's head and the head of the listener - although the recordings may sound compelling to the person who made them, there is currently no easy way to rate a particular person's head characteristics to assess their suitability as a "dummy head" recordist.

See also

References

  1. ^ Wenzel EM, Arruda M, Kistler DJ, Wightman FL. Localization using nonindividualized head-related transfer functions. J Acoust Soc Am 1993;94(1):111–23

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Head-related transfer function — The head related transfer function HRTF , also called the anatomical transfer function ATF , describes how a given sound wave input (parameterized as frequency and source location) is filtered by the diffraction and reflection properties of the… …   Wikipedia

  • Binaural recording — is a method of recording audio which uses a special microphone arrangement intended for replay using headphones. Dummy head recording refers to a specific method of capturing the audio, generally using a bust including pinnae (outer ears). As one …   Wikipedia

  • Revenge of the Living Dummy — Book Details= * Revenge of the Living Dummy is the first book in the Goosebumps Horrorland series, and although a specific release date was not set, it was seen it stores as early as February 27th, 2008. *Preceded by: None *Followed by: Creep… …   Wikipedia

  • Headphones — For other uses, see Headphones (disambiguation). Sennheiser HD555 headphones, used in audio production environments …   Wikipedia

  • 3D audio effect — 3D audio effects are a group of sound effects that attempt to widen the stereo image produced by two loudspeakers or stereo headphones, or to create the illusion of sound sources placed anywhere in 3 dimensional space, including behind, above or… …   Wikipedia

  • Sound Professionals — The Sound Professionals, Inc. is a manufacturer of professional and consumer microphones and audio electronics, primarily for portable audio recording. Created in 1997, they are one of a small number of manufacturers of binaural and other types… …   Wikipedia

  • Audio game — An audio game is a game played on an electronic device such as but not limited to a personal computer. It is similar to a video game save that the only feedback device is audible rather than visual.Audio games originally started out as blind… …   Wikipedia

  • Virtual Acoustic Space — (VAS), also known as Virtual Auditory Space, is a technique in which sounds presented over headphones appear to originate from any desired direction in space. The illusion of a virtual sound source outside the listener s head is created.Sound… …   Wikipedia

  • Sonic holography — is a proprietary audio filter design developed by Bob Carver and was used extensively in several preamplifier and receiver units built by Carver Corporation in the 1980s and 1990s.The goal of sonic holography is to remove distortions in pitch… …   Wikipedia

  • Ventriloquist (comics) — The Ventriloquist The Ventriloquist depicted on the cover of Batman #475 Publication information Publisher DC Co …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”