Cessna C-106 Loadmaster

Cessna C-106 Loadmaster
C-106 Loadmaster
Role Military transport monoplane
National origin United States
Manufacturer Cessna Aircraft
First flight 1943
Number built 2

The Cessna C-106 Loadmaster (or Cessna P260) was a 1940s American twin-engined transport monoplane.[1] Built of plywood it did not enter production due to a wartime shortage of material.[1]

Development

The C-106 Loadmaster was a twin-engined high-wing cantilever monoplane with a retractable tailwheel landing gear.[2] It was powered by two 600 hp Pratt & Whitney R-1340 engines.[1] Two company owned P260 demonstrators were built and given the military designation C-106 Loadmaster.[1] An order for 500 was cancelled due to a shortage of plywood.[1]

Variants

C-106
Military designation for company owned P260 prototype with two R-1340-S3H1 engines.
C-106A
Military designation for company owned P260 prototype with two R-1340-AN-2 engines.

Specifications

Data from [2]

General characteristics

  • Crew: 4
  • Length: 51 ft 1 in (15.57 m)
  • Wingspan: 64 ft 8 in (19.71 m)
  • Powerplant: 2 × Pratt & Whitney R-1340[1][3] air-cooled radial piston engine, 600 hp (450 kW) each

Performance

  • Maximum speed: 195 mph (314 km/h; 169 kn)

See also

Related lists

References

Notes
  1. ^ a b c d e f Andrade 1979, p. 84
  2. ^ a b "American airplanes - Cessna". www.aerofiles.com. 4 April 2009. http://www.aerofiles.com/_cessna.html. Retrieved 2009-12-29. 
  3. ^ Note: Aerofile has two Pratt & Whitney R-1830 being used.
Bibliography
  • Andrade, John (1979). U.S.Military Aircraft Designations and Serials since 1909. Midland Counties Publications. ISBN 0-904597-22-9. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Liste der Flugzeugtypencodes — IATA Code ICAO Code Flugzeugtyp Wirbelschleppenkategorie 100 F100 Fokker 100 M 141 B461 BAe 146 100 Passagiermodell M 142 B462 BAe 146 200 Passagiermodell …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”