Campro engine

Campro engine

The Campro engine is the first automotive engine ever developed together with Lotus by the Malaysian carmaker, Proton. [http://www.power-and-control.com/about/engineering.php] The name "Campro" is short for "Cam Profile". This engine powers the Proton Gen-2, the Proton Satria Neo, the Proton Waja Campro, the Proton Persona as well as Proton's future models. The Campro engine is aimed to show Proton's ability to make their own engines that produces good power output and meets newer emission standards.

All Campro engines incorporate with drive-by-wire technology (specifically electronic throttle control) for better response, [http://www.proton.com/innovation/rnd/campro.php Campro Engine] - fom Proton official website http://www.proton.com] eliminating the need for friction-generating mechanical linkages and cables. There have been some issues with cracking oil pumps but apparently Proton have introduced a new part recently to solve this problem. A recall has not been announced.

Basic DOHC engine

The basic Campro engine coded as S4PH is a basic DOHC 16-valve 1.6 L engine that produces convert|110|bhp|kW|abbr=on @ 6,000 rpm of horsepower and convert|148|Nm|ftlbf|abbr=on of torque. This is the engine that powers the Proton Gen-2. The S4PH engine can be fitted with Cam Profile Switching (CPS) and Variable Inlet Manifold (VIM) technology. Besides this 1.6 Litre engine, Proton has produced the 1.3 Litre version of the Campro engine.

Even though the S4PH engine seems to be quite powerful at higher revs, its performance is reportedly sluggish at lower revs and this is proven by driving the Gen-2 uphills where drivers who drive the manual transmission version have to shift a lot between 2nd gear and 3rd gear. This is due to its torque dip in the crucial 2,000 ~ 3,000 rpm operating range, where the torque actually decreases before picking up back to the maximum torque at 4,000 rpm. This torque characteristic can be clearly seen in manufacturer published engine performance curves. [http://paultan.org/archives/2006/01/13/waja-campro-vs-waja-4g18/]

Another engine option for the basic DOHC engine is a 1.3L engine coded as S4PE. The S4PE engine produces 94 bhp (70 kW) @ 6,000 rpm and the torque of convert|120|Nm|ftlbf|abbr=on @ 4,000 rpm, which is more powerful than the other 1.3L rivals, even with variable valve timing technology, it also suffers this omission (like its bigger brother) by displaying a torque dip at typical engine 2,000 to 3,000 rpm speeds.

The bore x stroke dimensions for both engines are as follows:-
* S4PH (1.6L): 76 x 88 mm, resulting the displacement of 1598 cc.
* S4PE (1.3L): 76 x 73.4 mm, resulting the displacement of 1332 cc.

Applications:-
* 2004 Proton Gen-2
* 2006 Proton Waja
* 2006 Proton Satria Neo
* 2007 Proton Persona

Campro CPS and VIM engine

The Campro CPS engine uses a variable valve lift system (Cam Profile Switching system) and a variable length intake manifold (VIM; not to be confused with the stand-alone IAFM used in the 2008 Proton Saga) to boost maximum power and improve the CPS engine's torque curve over the standard DOHC Campro engine.

The engine's Variable-length Intake Manifold (VIM) switches between a long intake manifold at low engine speeds and a short intake manifold at higher engine speeds. Proton is using a longer intake manifold to achieve slower air flow; as they found this promotes better mixing with fuel. The short intake manifold allows more air in faster. This is beneficial at high RPMs [http://paultan.org/archives/2008/02/06/proton-waja-campro-16-premium-cps-details/ Proton Waja Campro 1./6 Premium (CPS) launched in Malaysia] - from paultan.org] .

The Cam Profile Switching (CPS) system uses a trilobite camshaft to switch between two different cam profiles. One cam profile provides low valve lift, while the other cam profile has a high valve lift. The low valve lift cam profile is used at low to mid engine speeds to maintain idling quality and reduce emissions, while the high lift cam profile is used when the engine is spinning at mid to high engine speeds improve peak horsepower and torque [http://paultan.org/archives/2008/02/06/proton-waja-campro-16-premium-cps-details/ Proton Waja Campro 1./6 Premium (CPS) launched in Malaysia] - from paultan.org] .

VIM switches from the long to short runner at 4,800 rpm, while the CPS system switches over at 3,800 rpm. The result is 127 horsepower (96kW) at 6,500 rpm and 150Nm of torque at 4,500 rpm compared to the non-CPS Campro’s 110 horsepower (82kW) at 6,000 rpm and 148Nm of torque at 4,000 rpm [http://paultan.org/archives/2008/02/06/proton-waja-campro-16-premium-cps-details/ Proton Waja Campro 1./6 Premium (CPS) launched in Malaysia] - from paultan.org] . Proton claims that there is better response and torque at low engine speeds of between 2000 - 2500 rpm.

The new CPS engine first made its debut in the facelifted Proton GEN2 launched in Thailand [http://www.proton.com/about_proton/press/full_details.php?intArticleID=237 PROTON SETS FOOT IN THAILAND] - from Proton's official website http://www.proton.com] [http://paultan.org/archives/2007/12/01/facelifted-proton-gen2-with-cps-launched-in-thailand/ Facelifted Proton GEN2 with Campro CPS engine launched in Thailand!] - from paultan.org] , and made its first Malaysian debut in the Proton Waja Campro 1.6 Premium (CPS) [http://paultan.org/archives/2008/02/06/proton-waja-campro-16-premium-cps-details/ Proton Waja Campro 1./6 Premium (CPS) launched in Malaysia] - from paultan.org] . Besides the 1.6L version, the Campro CPS engine is also available in 1.8L version; however, the bigger 1.8L version has not yet debuted in any of Proton's car (as in 30 April 2008) but rather made its first debut in a Malaysian-made hovercraft [http://www.utusan.com.my/utusan/info.asp?y=2008&dt=0423&pub=Utusan_Malaysia&sec=Muka_Hadapan&pg=mh_10.htm Hovercraft terbang buatan Malaysia curi perhatian] - "Utusan Malaysia", 23 April 2008. Accessed on 30 April 2008.] .

Applications:-
* 2008 Proton Gen-2 (H-line)
* 2008 Proton Waja

Campro IAFM engine

The Campro IAFM (Integrated Air-Fuel Module) is essentially a basic DOHC Campro engine equipped with a variable-length intake manifold, developed under a joint fast track programme which began in April 2005 by EPMB, Bosch and Proton. However, the IAFM differs from the VIM (Variable Inlet Manifold) for the Campro CPS engine in terms as follows:- [http://paultan.org/archives/2008/01/06/proton-blm-step-by-step-build-up-teaser/#more-5428 Proton BLM Step-By-Step Build Up Teaser] from paultan.org]
# The IAFM is a stand-alone module that can be fitted with a basic DOHC Campro engine whereas the VIM needs to work in conjunction with the CPS system in a Campro CPS engine. [http://paultan.org/archives/2008/01/06/proton-blm-step-by-step-build-up-teaser/#more-5428 Proton BLM Step-By-Step Build Up Teaser] from paultan.org]
# The IAFM is operated by the engine vacuum while the VIM uses an ECU-controlled solenoid. [http://paultan.org/archives/2008/01/06/proton-blm-step-by-step-build-up-teaser/#more-5428 Proton BLM Step-By-Step Build Up Teaser] from paultan.org]

The Integrated Air-Fuel Module for the Proton Campro engine debuted in the second-generation Proton Saga, which was launched on 18 January 2008. We first heard of it back in October 2006 where it was still in advanced tooling stages, and ever since then everyone has been eagerly awaiting for the first Campros to roll out with the new air fuel module.

With the IAFM, the 1.3L engine used in the Proton Saga now produces convert|98|bhp|kW|abbr=on @ 6,500 rpm [http://www.motortrader.com.my/NUS/articles/article_1244/page_m.asp First Looks: The New Proton Saga] - from Malaysian Motor Trader. Retrieved on 20 January 2008.] . The maximum torque is slightly reduced to convert|113.2|Nm|ftlbf|abbr=on; however, the engine has broader torque range and the noticeable torque dip in the basic DOHC Campro engine has been eliminated [http://www.motortrader.com.my/NUS/articles/article_1244/page_m.asp First Looks: The New Proton Saga] - from Malaysian Motor Trader. Retrieved on 20 January 2008.] . However, the official brochure is only published with the familiar convert|94|bhp|abbr=on @ 6,000 rpm power and 120 N-m @ 4,000 rpm torque for consistency with other 1.3L Proton models. [ [http://paultan.org/archives/2008/01/18/proton-saga-test-drive-report/ The New Proton Saga: Details, Photos and Test Drive] - from paultan.org]

Meanwhile, the output of the 1.6L version of the IAFM engine which debuted in the 2008 Proton Gen-2 M-Line produces convert|110|bhp|kW|abbr=on @ 6,500 rpm of horsepower and convert|148|Nm|ftlbf|abbr=on of torque, and the torque dip around 2,500-3,500 rpm has been eliminated. [ [http://paultan.org/archives/2008/03/03/2008-proton-gen2-facelift-with-cps-launched/ 2008 Proton GEN2 Facelift with CPS launched!] - from paultan.org]

Applications:-
* 2008 Proton Saga
* 2008 Proton Gen-2 (M-line)
* 2008 Proton Persona

Hybrid Campro engine

In March 2007, Proton and Lotus have announced their concept model of a Proton Gen-2 powered by a hybrid powerplant that uses the Campro engine. The concept model was revealed during the 2007 Geneva Motor Show from 8 ~ 18 March 2007 [http://news.windingroad.com/concept-cars/lotus-bringing-plug-n-play-hybrid-drivetrain-system-to-geneva/ Lotus Bringing Plug-N-Play Hybrid Drivetrain System To Geneva] Winding Road, 5 March 2007] [http://paultan.org/archives/2007/03/07/proton-and-lotus-engineering-develop-proton-gen2-eve-hybrid-concept/ Proton and Lotus Engineering develop Proton Gen-2 EVE Hybrid Concept] paultan.org] .

The hybrid powerplant system, which is known as EVE system (Efficient, Viable, Environmental) will be using the same S4PH engine as the one that powers the present gasoline version of the Gen-2, combined together with a 30 kW, 144V electric motor. The main purpose of the hybrid powerplant system is to provide a hybrid system that can be retrofitted to existing models, retaining the same powerplant and also eliminates the need to develop a completely different platform, like the Honda Civic Hybrid. Unlike the IMA (Integrated Motor Assist) technology in the Civic Hybrid which uses a bulky Ni-MH battery pack, the EVE Hybrid system will use a Li-ion battery pack [http://paultan.org/archives/2008/08/05/proton-hybrid-car-in-2-to-3-years/ Proton hybrid car in 2 or 3 years] paultan.org] inside the engine bay.

The EVE Hybrid System will have 3 key technologies:-
# "Micro-hybrid" start-stop system - An integrated starter-alternator system is installed to switch off the engine automatically when the engine stops, for example at the traffic light. The engine will automatically restart when the gas pedal is depressed. [http://news.windingroad.com/concept-cars/lotus-bringing-plug-n-play-hybrid-drivetrain-system-to-geneva/ Lotus Bringing Plug-N-Play Hybrid Drivetrain System To Geneva] Winding Road, 5 March 2007] [http://paultan.org/archives/2007/03/07/proton-and-lotus-engineering-develop-proton-gen2-eve-hybrid-concept/ Proton and Lotus Engineering develop Proton Gen-2 EVE Hybrid Concept] paultan.org] .
# Full parallel hybrid technology - Combines the existing S4PH engine with a 30 kW, 144V electric motor, resulting in higher power (141 bhp combined), higher torque (233 N-m combined), lower emission (up to 22% carbon dioxide reduction) and better fuel economy (up to 4.6 L/100 km [http://paultan.org/archives/2008/08/03/lotus-eve-hybrid-at-the-proton-technology-week/ Lotus EVE Hybrid at the Proton Technology Week] paultan.org] ). The system also includes regenerative braking system. [http://news.windingroad.com/concept-cars/lotus-bringing-plug-n-play-hybrid-drivetrain-system-to-geneva/ Lotus Bringing Plug-N-Play Hybrid Drivetrain System To Geneva] Winding Road, 5 March 2007] [http://paultan.org/archives/2007/03/07/proton-and-lotus-engineering-develop-proton-gen2-eve-hybrid-concept/ Proton and Lotus Engineering develop Proton Gen-2 EVE Hybrid Concept] paultan.org] .
# Continuously Variable Transmission (CVT) - The CVT system provides an infinite number of gear ratios for better efficiency. [http://news.windingroad.com/concept-cars/lotus-bringing-plug-n-play-hybrid-drivetrain-system-to-geneva/ Lotus Bringing Plug-N-Play Hybrid Drivetrain System To Geneva] Winding Road, 5 March 2007] [http://paultan.org/archives/2007/03/07/proton-and-lotus-engineering-develop-proton-gen2-eve-hybrid-concept/ Proton and Lotus Engineering develop Proton Gen-2 EVE Hybrid Concept] paultan.org] .

The combined power and torque for the powerplant system are as follows:-
* Max power (gasoline engine only): 110 bhp (82 kW) @ 6,000 rpm
* Max torque (gasoline engine only): 148 N-m @ 4,000 rpm
* Max power (combined): 141 bhp (105 kW) @ 5,500 rpm
* Max torque (combined): 233 N-m @ 1,500 rpm (limited to 180 N-m continuous)

Proton will start commercializing their upcoming hybrid vehicles equipped with the EVE Hybrid System within 2010-2011 [http://paultan.org/archives/2008/08/05/proton-hybrid-car-in-2-to-3-years/ Proton hybrid car in 2 or 3 years] paultan.org] .

Future plans

Currently, Proton is planning to develop the higher displacement engine options (1.8L and 2.0L) to complement the existing Campro engines which are limited to 1.3L and 1.6L engine options only [http://paultan.org/archives/2008/03/04/proton-plans-diesel-and-larger-petrol-engines/ Proton plans diesel and larger petrol engines] paultan.org] and is currently in talks with foreign parties to help with the development. In addition, Proton is also planning to produce the diesel version of the Campro engines.

References

ee also

* Proton Gen-2
* Proton
* List of Proton car models

External links

* [http://www.ngv.net.my Official website of NGV specialist for Proton cars]
* [http://www.proton.com Proton official website]
* [http://www.proton.com/innovation/rnd/campro.php Proton Berhad's page on the Campro engine]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Proton Gen-2 — Infobox Automobile boxcolor = red name = Proton Gen 2 manufacturer = Proton production = 2004 ndash;present class = Compact platform = layout= FF layout body style = 5 door hatchback engine = 1.3 L Campro S4PE I4 1.6 L Campro S4PH I4 length =… …   Wikipedia

  • Proton Waja — Infobox Automobile boxcolor = red name = Proton Waja manufacturer = Proton production = 2000 ndash;present class = Compact platform = layout= FF layout body style = 4 door saloon engine = 1.6 L Mitsubishi 4G18 I4 1.6 L Proton Campro S4PH I4 1.8 L …   Wikipedia

  • List of Proton car models — This is a list of Proton car models, listed in chronological order by the year of release of each of the respective cars. Proton is the Malaysian national carmaker. Proton SagaThe Proton Saga was the first Proton model, based on the Mitsubishi… …   Wikipedia

  • Proton Satria — Infobox Automobile boxcolor = red name = Proton Satria manufacturer = Proton production = 1995 ndash;present class = Supermini platform = layout= FF layout body style = 3 door hatchback similar = Mitsubishi Mirage Honda CivicThe Proton Satria was …   Wikipedia

  • Proton Persona — Infobox Automobile Proton Gen 2 hatchback, with an added boot, slightly extended roof line and higher profile tyres. name = Proton Persona manufacturer = Proton aka = Proton Gen 2 Persona (UK) production = 2007 ndash;present class = Compact… …   Wikipedia

  • Lotus Cars — Infobox Company company name = Lotus Cars company company type = Private (Majority owned by Proton) genre = foundation = 1952 founder = Colin Chapman location city = flagicon|UK Hethel, Norfolk location country = England location = key people =… …   Wikipedia

  • Proton Saga — Infobox Automobile boxcolor = red name = Proton Saga manufacturer = Proton production = 1985 ndash;present class = Compact Subcompact platform = layout= FF layout body style = 4 door saloon 5 door hatchback engine = weight = predecessor =… …   Wikipedia

  • Manifold (automotive) — In automotive engineering, an intake manifold or inlet manifold is the part of an engine that supplies the fuel/air mixture to the cylinders. An exhaust manifold or header collects the exhaust gases from multiple cylinders into one pipe. The word …   Wikipedia

  • Variable valve timing — Variable valve timing, or VVT, is a generic term for an automobile piston engine technology. VVT allows the lift or duration or timing (some or all) of the intake or exhaust valves (or both) to be changed while the engine is in operation. Two… …   Wikipedia

  • Variable length intake manifold — (VLIM) is an automobile engine manifold technology. As the name implies, VLIM can vary the length of the intake tract in order to optimize power and torque, as well as provide better fuel efficiency.There are two main effects of variable intake… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”