Mohs scale of mineral hardness

Mohs scale of mineral hardness

The Mohs scale of mineral hardness characterizes the scratch resistance of various minerals through the ability of a harder material to scratch a softer material. It was created in 1812 by the German geologist and mineralogist Friedrich Mohs and is one of several definitions of hardness in materials science.[1] The method of comparing hardness by seeing which minerals can scratch others, however, is of great antiquity, having first been mentioned by Theophrastus in his treatise On Stones, circa 300 BC, followed by Pliny the Elder in his Naturalis Historia, circa 77 AD.[2][3][4]

Contents

Minerals

The Mohs scale of mineral hardness is based on the ability of one natural sample of matter to scratch another. The samples of matter used by Mohs are all minerals. Minerals are pure substances found in nature. Rocks are made up of one or more minerals.[5] As the hardest known naturally occurring substance when the scale was designed, diamonds are at the top of the scale. The hardness of a material is measured against the scale by finding the hardest material that the given material can scratch, and/or the softest material that can scratch the given material. For example, if some material is scratched by apatite but not by fluorite, its hardness on the Mohs scale would fall between 4 and 5.[6]

The Mohs scale is a purely ordinal scale. For example, corundum (9) is twice as hard as topaz (8), but diamond (10) is four times as hard as corundum. The table below shows comparison with absolute hardness measured by a sclerometer, with pictorial examples.[7][8]

Mohs hardness Mineral Chemical formula Absolute hardness Image
1 Talc Mg3Si4O10(OH)2 1 Talc block.jpg
2 Gypsum CaSO4·2H2O 3 Gypse Arignac.jpg
3 Calcite CaCO3 9 Calcite-sample2.jpg
4 Fluorite CaF2 21 Fluorite with Iron Pyrite.jpg
5 Apatite Ca5(PO4)3(OH,Cl,F) 48 Apatite crystals.jpg
6 Orthoclase Feldspar KAlSi3O8 72 OrthoclaseBresil.jpg
7 Quartz SiO2 100 Quartz Brésil.jpg
8 Topaz Al2SiO4(OH,F)2 200 Topaz cut.jpg
9 Corundum Al2O3 400 Cut Ruby.jpg
10 Diamond C 1600 Rough diamond.jpg


On the Mohs scale, graphite (a principal constituent of pencil "lead") has a hardness of 1.5; a fingernail, 2.2–2.5; a copper penny, 3.2–3.5; a pocketknife 5.1; a knife blade, 5.5; window glass plate, 5.5; and a steel file, 6.5.[9] A streak plate (unglazed porcelain) has a hardness of 7.0. Using these ordinary materials of known hardness can be a simple way to approximate the position of a mineral on the scale.[1]

Intermediate hardness

The table below incorporates additional substances that may fall between levels:

Hardness Substance or mineral
0.2–0.3 caesium, rubidium
0.5–0.6 lithium, sodium, potassium
1 talc
1.5 gallium, strontium, indium, tin, barium, thallium, lead, graphite
2 hexagonal boron nitride,[10] calcium, selenium, cadmium, sulfur, tellurium, bismuth
2.5 to 3 magnesium, gold, silver, aluminium, zinc, lanthanum, cerium, Jet_(lignite) (lignite)
3 calcite, copper, arsenic, antimony, thorium, dentin
4 fluorite, iron, nickel
4 to 4.5 platinum, steel
5 apatite, cobalt, zirconium, palladium, tooth enamel, obsidian (volcanic glass)
5.5 beryllium, molybdenum, hafnium
6 orthoclase, titanium, manganese, germanium, niobium, rhodium, uranium
6 to 7 glass, fused quartz, iron pyrite, silicon, ruthenium, iridium, tantalum, opal
7 quartz, vanadium, osmium, rhenium
7.5 to 8 hardened steel, tungsten, emerald, spinel
8 topaz, cubic zirconia
8.5 chrysoberyl, chromium, silicon nitride
9-9.5 corundum, silicon carbide (carborundum), tungsten carbide, titanium carbide, stishovite
9.5–10 rhenium diboride, tantalum carbide, titanium diboride, boron nitride, boron [11][12][13]

[14].


10 diamond
>10 nanocrystalline diamond (hyperdiamond, ultrahard fullerite)

Hardness (Vickers)

Comparison between Hardness (Mohs) and Hardness (Vickers):[15]

Mineral
name
Hardness (Mohs) Hardness (Vickers)
kg/mm2
Graphite 1 - 2 VHN10=7 - 11
Tin 1½ - 2 VHN10=7 - 9
Bismuth 2 - 2½ VHN100=16 - 18
Gold 2½ - 3 VHN10=30 - 34
Silver 2½ - 3 VHN100=61 - 65
Chalcocite 2½ - 3 VHN100=84 - 87
Copper 2½ - 3 VHN100=77 - 99
Galena VHN100=79 - 104
Sphalerite 3½ - 4 VHN100=208 - 224
Heazlewoodite 4 VHN100=230 - 254
Carrollite 4½ - 5½ VHN100=507 - 586
Goethite 5 - 5½ VHN100=667
Hematite 5 - 6 VHN100=1,000 - 1,100
Chromite VHN100=1,278 - 1,456
Anatase 5½ - 6 VHN100=616 - 698
Rutile 6 - 6½ VHN100=894 - 974
Pyrite 6 - 6½ VHN100=1,505 - 1,520
Bowieite 7 VHN100=858 - 1,288
Euclase VHN100=1,310
Chromium 9 VHN100=1,875 - 2,000

See also

References

  1. ^ a b Encyclopædia Britannica. 2009. Encyclopædia Britannica Online. 22 Feb. 2009 "Mohs hardness."
  2. ^ Theophrastus on Stones
  3. ^ Pliny the Elder.Naturalis Historia.Book 37.Chap. 15. ADamas: six varieties of it. Two remedies.
  4. ^ Pliny the Elder.Naturalis Historia.Book 37.Chap. 76. The methods of testing precious stones.
  5. ^ Learn science, Intermediate p. 42
  6. ^ American Federation of Mineralogical Societies. "Mohs Scale of Mineral Hardness"
  7. ^ Amethyst Galleries' Mineral Gallery What is important about hardness?
  8. ^ Inland Lapidary Mineral Hardness and Hardness Scales
  9. ^ William S. Cordua (1998). "The Hardness of Minerals and Rocks". Lapidary Digest. http://www.gemcutters.org/LDA/hardness.htm. Retrieved 2007-08-19.  Hosted at International Lapidary Association
  10. ^ L. I. berger "semiconductor materials" CRC press, 1996 ISBN 0849389127, p. 126
  11. ^ Weintraub E. (1911). "On the properties and preparation of the element boron.". J. Ind. Eng. Chem. 3 (5): 299–301. doi:10.1021/ie50029a007. 
  12. ^ Solozhenko, V. L.; Kurakevych O. O.; Oganov A. R. (2008). "On the hardness of a new boron phase, orthorhombic γ-B28". Journal of Superhard Materials 30 (6): 428–429. doi:10.3103/s1063457608060117. . Open access:[1]
  13. ^ Zarechnaya, E. Yu.; Dubrovinsky, L.; Dubrovinskaia, N.; Filinchuk, Y.; Chernyshov, D.; Dmitriev, V.; Miyajima, N.; El Goresy, A. et al. (2009). "Superhard semiconducting optically transparent high pressure phase of boron". Phys. Rev. Lett. 102 (18): 185501. Bibcode 2009PhRvL.102r5501Z. doi:10.1103/physrevlett.102.185501. PMID 19518885. 
  14. ^ Oganov A.R., Solozhenko V.L. (2009). "Boron: a hunt for superhard polymorphs". Journal of Superhard Materials 31: 285–291. . Open access: [2]
  15. ^ "Mindat.org". http://www.mindat.org/min-1911.html. 
  • Mohs hardness of elements is taken from G.V. Samsonov (Ed.) in Handbook of the physicochemical properties of the elements, IFI-Plenum, New York, USA, 1968.
  • Cordua, William S. "The Hardness of Minerals and Rocks". Lapidary Digest, c. 1990.

Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Mohs' scale — mōz , mōs , mō səz n 1) a scale of hardness for minerals in which 1 represents the hardness of talc; 2, gypsum; 3, calcite; 4, fluorite; 5, apatite; 6, orthoclase; 7, quartz; 8, topaz; 9, corundum; and 10, diamond 2) a revised and expanded… …   Medical dictionary

  • Mohs — or MoHS can refer to: Friedrich Mohs, a 19th century German geologist who developed: Mohs scale of mineral hardness, a scale used in materials science to describe hardness Frederic E. Mohs, an American doctor who developed: Mohs surgery, a… …   Wikipedia

  • Mohs scale — /ˈmoʊz skeɪl/ (say mohz skayl) noun a scale for measuring the hardness of a mineral by determining its resistance to scratching by other minerals of known hardness. {after F Mohs, 1773–1839, German mineralogist} …  

  • Mohs hardness — Rough measure of the resistance of a smooth surface to scratching or abrasion, expressed in terms of a scale devised by German mineralogist Friedrich Mohs in 1812. Minerals are ranked in comparison with the Mohs scale, which is made up of 10… …   Universalium

  • Mohs , Friedrich — (1773–1839) German mineralogist Mohs was born at Gernrode in Saxony and studied at Halle and at the Freiberg Mining Academy under Abraham Werner. In 1812 he became curator of the mineral collection at the Johanneum in Graz. He succeeded Werner at …   Scientists

  • Friedrich Mohs — (January 29, 1773 September 29, 1839) was a German geologist/mineralogist.CareerMohs, born in Gernrode, Germany, studied chemistry, mathematics and physics at the University of Halle and also studied at the Mining Academy in Freiberg, Saxony.… …   Wikipedia

  • Mineral — For other uses, see Mineral (disambiguation). An assortment of minerals. A mineral is a naturally occurring …   Wikipedia

  • hardness — /hahrd nis/, n. 1. the state or quality of being hard: the hardness of ice. 2. a relative degree or extent of this quality: wood of a desirable hardness. 3. that quality in water that is imparted by the presence of dissolved salts, esp. calcium… …   Universalium

  • hardness —    a measure of the hardness of a metal or mineral. Hardness is a property easy to appreciate but difficult to quantify and measure.    The Mohs hardness scale is used in geology to give a rough estimate of hardness by testing which minerals are… …   Dictionary of units of measurement

  • hardness — noun 1. the property of being rigid and resistant to pressure; not easily scratched; measured on Mohs scale • Ant: ↑softness • Derivationally related forms: ↑hard • Hypernyms: ↑consistency, ↑consistence, ↑eubstance, ↑ …   Useful english dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”