Loading dose

Loading dose


A loading dose is an initial higher dose of a drug that may be given at the beginning of a course of treatment before dropping down to a lower maintenance dose.[1]

A loading dose is most useful for drugs that are eliminated from the body relatively slowly. Such drugs need only a low maintenance dose in order to keep the amount of the drug in the body at the appropriate level, but this also means that, without an initial higher dose, it would take a long time for the amount of the drug in the body to reach that level.

Drugs which may be started with an initial loading dose include digoxin, teicoplanin, voriconazole and procainamide. Phenytoin for acute status epilepticus should also be given with an initial loading dose, co-administered with a benzodiazepine, to immediately stabilize neuronal membranes and electrical activity during a seizure.

Contents

Worked example

For an example, one might consider the hypothetical drug foosporin. Suppose it has a long lifetime in the body, and only ten percent of it is cleared from the blood each day by the liver and kidneys. Suppose also that the drug works best when the total amount in the body is exactly one gram. So, the maintenance dose of foosporin is 100 milligrams (100 mg) per day—just enough to offset the amount cleared.

Suppose a patient just started taking 100 mg of foosporin every day.

  • On the first day, they'd have 100 mg in their system; their body would clear 10 mg, leaving 90 mg.
  • On the second day, the patient would have 190 mg in total; their body would clear 19 mg, leaving 171 mg.
  • On the third day, they'd be up to 271 mg total; their body would clear 27 mg, leaving 244 mg.

As one can see, it would take many days for the total amount of drug within the body to come close to 1 gram (1000 mg) and achieve its full therapeutic effect.

For a drug such as this, a doctor might prescribe a loading dose of one gram to be taken on the first day. That immediately gets the drug's concentration in the body up to the therapeutically-useful level.

  • First day: 1000 mg; the body clears 100 mg, leaving 900 mg.
  • On the second day, the patient takes 100 mg, bringing the level back to 1000 mg; the body clears 100 mg overnight, still leaving 900 mg, and so forth.

Calculating the loading dose

Four variables are used to calculate the loading dose:

Cp = desired peak concentration of drug
Vd = volume of distribution of drug in body
F = bioavailability
S = salt fraction

The required loading dose may then be calculated as

\mbox{Loading dose} = \frac{C_p V_d}{F S}

For an intravenously administered drug, the bioavailability F will equal 1, since the drug is directly introduced to the bloodstream. If the patient requires an oral dose, bioavailability will be less than 1 (depending upon absorption, first pass metabolism etc.), requiring a larger loading dose.

Sample values and equations

Characteristic Description Example value Abbreviation(s) Formula
Dose Loading dose (LD), or steady state / maintenance dose (MD). 500 mg \textstyle D design parameter
τ Dosing interval. 24 h \textstyle \tau design parameter
Volume of distribution The apparent volume in which a drug is distributed immediately after it has been injected intravenously and equilibrated between plasma and the surrounding tissues. 6.0 L \textstyle V_d \textstyle = D / C_0
Concentration Initial or steady-state concentration of drug in plasma. 83.3 µg/mL \textstyle C_{0} \ or \ C_{ss} \textstyle = D / V_d
Biological half-life The time required for the concentration of the drug to reach half of its original value. 12 h \textstyle t_{1/2} \textstyle = ln (2) / k_{e}
Elimination rate constant The rate at which drugs are removed from the body. 0.0578 h-1 \textstyle k_e \textstyle = ln (2) / t_{1/2} = CL / V_{d}
Elimination rate Rate of infusion required to balance elimination. 50 mg/h \textstyle k_{in} \textstyle = C_{ss} \cdot CL
Area under the curve The integral of the concentration-time curve (after a single dose or in steady state). 1320 µg/mL×h \textstyle AUC_{0-\infty}

\textstyle AUC_{\tau,ss}
= \int_{0}^{\infty}C\, dt
= \int_{t}^{t+\tau}C\, dt
Clearance The volume of plasma cleared of the drug per unit time. 0.38 L/h \textstyle CL \textstyle= V_{d} \cdot k_{e} = D/AUC
Bioavailability The fraction of drug that is absorbed. 0.8 \textstyle f = \frac{AUC_{po}\cdot D_{iv}}{AUC_{iv}\cdot D_{po}}
Cmax The peak plasma concentration of a drug after oral administration. 60.9 µg/mL \textstyle C_{max} direct measurement
tmax Time to reach Cmax. 3.9 h \textstyle t_{max} direct measurement
Cmin The lowest (trough) concentration that a drug reaches before the next dose is administered. 27.7 µg/mL \textstyle C_{min,ss} direct measurement
Fluctuation Peak trough fluctuation within one dosing interval at steady state 41.8 % \textstyle %PTF \textstyle =100 \cdot \frac{(C_{max,ss} - C_{min,ss})}{C_{av,ss}}
where
\textstyle C_{av,ss}=\frac{AUC_{\tau,ss}}{\tau}
edit


References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • loading dose — n a large initial dose of a substance or series of such doses given to rapidly achieve a therapeutic concentration in the body * * * a dose of medication, often larger than subsequent doses, administered to establish a therapeutic level of the… …   Medical dictionary

  • Dose-response relationship — Semi log plots of two agonists with different Kd. The dose response relationship, or exposure response relationship, describes the change in effect on an organism caused by differing levels of exposure (or doses) to a stressor (usually a… …   Wikipedia

  • dose — 1. The quantity of a drug or other remedy to be taken or applied all at one time or in fractional amounts within a given period. Cf.:dosage (2). 2. In nuclear medicine, amount of energy absorbed per unit mass of irradiated material (absorbed d.) …   Medical dictionary

  • Median lethal dose — This article is about the toxicological term. For the album by Mudvayne, see L.D. 50 (album). For other uses, see LD50 (disambiguation). In toxicology, the median lethal dose, LD50 (abbreviation for “Lethal Dose, 50%”), LC50 (Lethal Concentration …   Wikipedia

  • histidine loading test — (for folic acid deficiency) a loading dose of histidine is given, and the resultant urinary excretion of excess formiminoglutamic acid (FIGLU) is measured, because that is dependent on the amount of tetrahydrofolic acid that is present. Called… …   Medical dictionary

  • Amiodarone — Systematic (IUPAC) name (2 {4 [(2 butyl 1 benzofuran 3 yl)carbonyl] …   Wikipedia

  • Warfarin — This article is about the drug with the brandname Coumadin. For the anticoagulant rodenticide poisons often called coumarins or coumadins , see 4 hydroxycoumarins. Warfarin …   Wikipedia

  • Leflunomide — drugbox IUPAC name = 5 methyl N [4 (trifluoromethyl) phenyl] isoxazole 4 carboxamide CAS number = 75706 12 6 ATC prefix = L04 ATC suffix = AA13 ATC supplemental = PubChem = 3899 DrugBank = APRD00205 C=12 | H=9 | F=3 | N=2 | O=2 molecular weight …   Wikipedia

  • Biological half-life — For other uses, see Half life (disambiguation). The biological half life or elimination half life of a substance is the time it takes for a substance (for example a metabolite, drug, signalling molecule, radioactive nuclide, or other substance)… …   Wikipedia

  • Creatine supplements — For the biochemistry and physiology of creatine, see Creatine. Creatine supplements are athletic aids used to increase high intensity athletic performance. Though researchers have known of the use of creatine as an energy source by skeletal… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”