Flashing (weatherproofing)

Flashing (weatherproofing)

Flashing refers to thin continuous pieces of sheet metal or other impervious material installed to prevent the passage of water into a structure from an angle or joint. Flashing generally operates on the principle that, for water to penetrate a joint, it must work itself upward against the force of gravity or in the case of wind-driven rain, it would have to follow a tortuous path during which the driving force will be dissipated. Exterior building materials can be configured with a non-continuous profile to defeat water surface tension.

Flashing may be exposed or concealed. Exposed flashing is usually of a sheet metal, such as aluminium, copper, painted galvanized steel, stainless steel, zinc alloy, terne metal, lead or lead-coated copper. Metal flashing should be provided with expansion joints on long runs to prevent deformation of the metal sheets. The selected metal should not stain or be stained by adjacent materials or react chemically with them.

Flashing concealed within a construction assembly may be of sheet metal or a water proofing membrane such as bituminous fabric or plastic sheet material, depending on the climate and structural requirements. Aluminium and lead react chemically with cement mortar. Some flashing materials can deteriorate with exposure to sunlight.

Flashing can assume a number of forms:

*Roof flashing is placed around discontinuities or objects which protrude from the roof of a building (such as pipes and chimneys, or the edges of other roofs) to deflect water away from seams or joints.
*Wall flashing may be embedded in a wall to direct water that has penetrated the wall back outside, or it may be applied in a manner intended to prevent the entry of water into the wall. Wall flashing is typically found at interruptions in the wall, such as windows and points of structural support.
*Sill flashing is a concealed flashing that is typically placed under windowsills or door thresholds to prevent water from entering a wall at those points.
*Base flashing is found at the base of a wall, and usually incorporates through-wall flashing with weep holes to permit the escape of water. Base flashings may be placed at the building grade or at a point where a roof intersects a wall.

Its name may derive from the fact that metal flashing (typically copper or aluminum) reflects flashes of sunlight. Historically lead was also used for flashing, but this caused health and environmental problems. Modern flashing may also be rubber or other waterproof synthetic materials, but metal, such as stainless steel, is still frequently used.

In the US and UK, at least, lead flashing and fittings are still readily available, despite the environmental concerns associated with bulk use of this heavy metal. The Lead Sheet Association touts its recyclability and extreme durability, 500 years, compared to modern materials that can fail within 20 years. [http://www.lead4life.co.uk/green.htm]

References

cite book
last = Ching
first = Francis D. K.
authorlink =
coauthors = Cassandra Adams
title = Building Construction Illustrated (3rd edition)
publisher = John Wiley @ Sons Inc
date = 2001
location =
pages =
url =
doi =
id =
isbn = 0-471-35898-3

cite book
last = Beall
first = Christine
authorlink =
coauthors =
title = Masonry Design and Detailing (2nd Edition)
publisher = McGraw Hill Book Company
date = 1987
location =
pages =
url =
doi =
id =
isbn = 0-07-004223-3

cite book
last = Ramsey
first = Charles
authorlink =
coauthors = Hoke, John Ray, Jr. (ed)
title = Architectural Graphics Standards (10th Edition)
publisher = John Wiley & Sons, Inc.
date = 2000
location =
pages =
url =
doi =
id =
isbn = 0-471-34816-3

External links

* [http://www.oldhouseweb.com/stories/Detailed/10146.shtml Roof Flashing Details] Illustrated summary of various types of flashing


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Flashing — may refer to: *Exhibitionism, briefly exposing one s body in a socially inappropriate way. *Flashing (cell phones), re programming the flash memory, software, computer memory, or operating system in a mobile phone. *Flashing (weatherproofing),… …   Wikipedia

  • Dutch gable — This article is about a gable roof with a parapet. For a roof with a small gable above a hip, see gablet roof. Dutch gables of varying complexity decorate the garden facade of Montacute House built circa 1598 A Dutch gable or Flemish gable is a… …   Wikipedia

  • Masonry veneer — walls consist of a single non structural external layer of masonry work, typically brick, backed by an air space. The innermost element is usually structural, and may consist of wood or metal framing or masonry. Walls constructed in this manner… …   Wikipedia

  • Reglet — A reglet is an interlocking two part flashing between a wall (or the back side of a parapet) and a roof. Reglets usually consist of a receiver flashing affixed to the wall with fasteners and a bead of sealant, and a counter flashing extending… …   Wikipedia

  • Weatherization — (American English) or weatherproofing (British English) is the practice of protecting a building and its interior from the elements, particularly from sunlight, precipitation, and wind, and of modifying a building to reduce energy consumption and …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”