Configuration state function

Configuration state function

In quantum chemistry, a configuration state function (CSF), is a symmetry-adapted linear combination of Slater determinants. A CSF must not be confused with a configuration.

Contents

Definition

In quantum chemistry, a configuration state function (CSF), is a symmetry-adapted linear combination of Slater determinants. It is constructed to have the same quantum numbers as the wavefunction, Ψ, of the system being studied. In the method of configuration interaction the wavefunction[1] can be expressed as a linear combination of CSFs, that is in the form

Ψ = ckψk
k

where ψk denotes the set of CSFs. The coefficients, ck, are found by using the expansion of Ψ to compute a Hamiltonian matrix. When this is diagonalized, the eigenvectors are chosen as the expansion coefficients. CSFs rather than just Slater determinants can also be used as a basis in Multi-configurational self-consistent field computations.

In atomic structure, a CSF is an eigenstate of

  • the square of the angular momentum operator,  \hat{L}^2 .
  • the z-projection of angular momentum  \hat {L}_z
  • the square of the spin operator  \hat{S}^2 .
  • the z-projection of the spin operator  \hat {S}_z

In linear molecules,  \hat{L}^2 does not commute with the Hamiltonian for the system and therefore CSFs are not eigenstates of  \hat{L}^2 . However, the z-projection of angular momentum is still a good quantum number and CSFs are constructed to be eigenstates of  \hat{L}_z, \hat{S}^2 and  \hat {S}_z . In non-linear (which implies polyatomic) molecules, neither  \hat{L}^2 nor  \hat{L}_z commute with the Hamiltonian. The CSFs are constructed to have the spatial transformation properties of one of the irreducible representations of the point group to which the nuclear framework belongs. This is because the Hamiltonian operator transforms in the same way.[2]  \hat{S}^2 and  \hat {S}_z are still valid quantum numbers and CSFs are built to be eigenfunctions of these operators.

From Configurations to Configuration State Functions

CSFs are however derived from configurations. A configuration is just an assignment of electrons to orbitals. For example 1s2 and 2 are example of two configurations, one from atomic structure and one from molecular structure.

From any given configuration we can, in general, create several CSFs. CSFs are therefore sometimes also called N-particle symmetry adapted basis functions. It is important to realize that for a configuration the number of electrons is fixed; let's call this N. When we are creating CSFs from a configuration we have to work with the spin-orbitals associated with the configuration.

For example given the 1s orbital in an atom we know that there are two spin-orbitals associated with this,

1s\alpha \;\;\; 1s\beta

where

\alpha, \;\;\; \beta

are the one electron spin-eigenfunctions for spin-up and spin-down respectively. Similarly, for the orbital in a linear molecule (C_{\infty v} point group) we have four spin orbitals:

1\pi(+)\alpha, \; 1\pi(+)\beta, \; 1\pi(-)\alpha, \; 1\pi(-)\beta.

This is because the π designation corresponds to z-projection of angular momentum of both + 1 and − 1.

We can think of the set of spin orbitals as a set of boxes each of size one; let's call this M boxes. We distribute the N electrons among the M boxes in all possible ways. Each assignment corresponds to one Slater determinant, Di. There can be great number of these, particularly when N < M. Another way to look at this is to say we have M entities and we wish to select N of them, known as a combination. We need to find all possible combinations. Order of the selection is not significant because we are working with determinants and can interchange rows as required.

If we then specify the overall coupling that we wish to achieve for the configuration, we can now select only those Slater determinants that have the required quantum numbers. In order to achieve the required total spin angular momentum (and in the case of atoms the total orbital angular momentum as well), each Slater determinant has to be premultiplied by a coupling coefficient ci, derived ultimately from Clebsch-Gordan coefficients. Thus the CSF is a linear combination

\sum_i c_i \; D_i.

The Lowdin projection operator formalism[3] may be used to find the coefficients. For any given set of determinants Di it may be possible to find several different sets of coefficients.[4] Each set corresponds to one CSF. In fact this simply reflects the different internal couplings of total spin and spatial angular momentum.

A genealogical algorithm for CSF construction

At the most fundamental level, a configuration state function can be constructed

  • from a set of M orbitals

and

  • a number N of electrons

using the following genealogical algorithm:

  1. distribute the N over the set of M orbitals giving a configuration
  2. for each orbital the possible quantum number couplings (and therefore wavefunctions for the individual orbitals) are known from basic quantum mechanics; for each orbital choose one of the permitted couplings but leave the z-component of the total spin, Sz undefined.
  3. check that the spatial coupling of all orbitals matches that required for the system wavefunction. For a molecule exhibiting C_{\infty v} or D_{\infty h} this is achieved by a simple linear summation of the coupled

λ value for each orbital; for molecules whose nuclear framework transforms according to D2h symmetry, or one of its sub-groups, the group product table has to be used to find the product of the irreducible representation of all N orbitals.

  1. couple the total spins of the N orbitals from left to right; this means we have to choose a fixed Sz for each orbital.
  2. test the final total spin and its z-projection against the values required for the system wavefunction

The above steps will need to be repeated many times to elucidate the total set of CSFs that can be derived from the N electrons and M orbitals.

Single Orbital configurations and wavefunctions

Basic quantum mechanics defines the possible single orbital wavefunctions. In any software implementation, these will be provided either as a table or thourgh a set of logic statements.

The following table shows the possible couplings for a σ orbital with one or two electrons.

Orbital Configuration Term symbol Sz projection
σ1 2Σ +  \;\;\frac{1}{2}
σ1 2Σ + -\frac{1}{2}
σ2 1Σ + 0

The next table shows the fifteen possible couplings for a π orbital. The \delta, \phi, \gamma, \ldots orbitals also each generate fiftenn possible couplings, all of which can be easily inferred from this table.

Orbital Configuration Term symbol Lambda coupling Sz projection
π1 2Π + 1  \frac{1}{2}
π1 2Π + 1 -\frac{1}{2}
π1 2Π − 1 \frac{1}{2}
π1 2Π − 1 -\frac{1}{2}
π2 3Σ 0 + 1
π2 3Σ 0 0
π2 3Σ 0 − 1
π2 1Δ + 2 0
π2 1Δ − 2 0
π2 1Σ + 0 0
π3 2Π + 1  \frac{1}{2}
π3 2Π + 1 -\frac{1}{2}
π3 2Π − 1 \frac{1}{2}
π3 2Π − 1 -\frac{1}{2}
π4 1Σ + 0 0

Similar tables can be constructed for atomic systems, which transform according to the point group of the sphere, that is for s, p, d, f \ldots orbitals. The number of term sysmbols and therefore possible couplings is significantly larger in the atomic case.

Computer Software for CSF generation

Computer programs are readily available to generate CSFs for atoms[5] for molecules [6] and for electron and positron scattering by molecules .[7] A popular computational method for CSF construction is the Graphical Unitary Group Approach.

References

  1. ^ Engel, T. (2006). Quantum Chemistry and Spectroscopy. Pearson PLC. ISBN 0-8053-3842-X. 
  2. ^ Pilar, F. L. (1990). Elementary Quantum Chemistry (2nd ed.). Dover Publications. ISBN 0-486-41464-7. 
  3. ^ Crossley, R. J. S. (1977). "On Löwdin's projection operators for angular momentum. I". International Journal of Quantum Chemistry 11 (6): 917–929. doi:10.1002/qua.560110605. 
  4. ^ Nesbet, R. K. (2003). "Section 4.4". In Huo; Gianturco, F. A.. Variational principles and methods in theoretical physics and chemistry. Cambridge University Press. p. 49. ISBN 0-521-80391-8. 
  5. ^ Sturesson, L.; Fischer, C. F. (1993). "LSGEN - a program to generate configuration-state lists of LS-coupled basis functions". Computer Physics Communications 74 (3): 432–440. Bibcode 1993CoPhC..74..432S. doi:10.1016/0010-4655(93)90024-7. 
  6. ^ McLean, A. D.; et al. (1991). "ALCHEMY II, A Research Tool for Molecular Electronic Structure and Interactions". In Clementi, E.. Modern Techniques in Computational Chemistry (MOTECC-91). ESCOM Science Publishers. ISBN 90-72199-10-3. 
  7. ^ Morgan, L. A.; Tennyson, J.; Gillan, C. J. (1998). "The UK molecular R-matrix codes". Computer Physics Communications 114 (1–3): 120–128. Bibcode 1998CoPhC.114..120M. doi:10.1016/S0010-4655(98)00056-3. 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Configuration interaction — Electronic structure methods Tight binding Nearly free electron model Hartree–Fock method Modern valence bond Generalized valence bond Møller–Plesset perturbation theory …   Wikipedia

  • Fonction D'état De Configuration — En chimie quantique, une fonction d état de configuration (en anglais : configuration state function, CSF), est une combinaison linéaire de déterminants de Slater symétriquement adaptés. C est un état propre du carré de l opérateur moment… …   Wikipédia en Français

  • Fonction d'etat de configuration — Fonction d état de configuration En chimie quantique, une fonction d état de configuration (en anglais : configuration state function, CSF), est une combinaison linéaire de déterminants de Slater symétriquement adaptés. C est un état propre… …   Wikipédia en Français

  • Fonction d'état de configuration — En chimie quantique, une fonction d état de configuration (en anglais : configuration state function, CSF), est une combinaison linéaire de déterminants de Slater symétriquement adaptés. C est un état propre du carré de l opérateur moment… …   Wikipédia en Français

  • Interaction De Configuration — Méthodes numériques pour le calcul de la structure électronique Hartree Fock Théorie de la perturbation de Møller Plesset Interaction de configuration Méthode du cluster couplé Champ multi configurationnel auto cohérent Théorie de la foncti …   Wikipédia en Français

  • Interaction de configuration — L interaction de configuration (configuration interaction en anglais CI) est une méthode post Hartree Fock linéaire variationnelle pour la résolution de l équation de Schrödinger non relativiste dans l approximation de Born Oppenheimer pour un… …   Wikipédia en Français

  • Configuration space — Not to be confused with PCI Configuration Space. C space redirects here. For the art gallery, see C Space, Beijing. Contents 1 Configuration space in physics 2 Configuration spaces in mathematics 3 See also …   Wikipedia

  • State — A state is a political association with effective sovereignty over a geographic area and representing a population. These may be nation states, sub national states or multinational states. A state usually includes the set of institutions that… …   Wikipedia

  • Function prologue — In assembly language programming, the function prologue is a few lines of code which appear at the beginning of a function, which prepare the stack and registers for use within the function. Similarly, the function epilogue appears at the end of… …   Wikipedia

  • State (computer science) — In computer science and automata theory, a state is a unique configuration of information in a program or machine. It is a concept that occasionally extends into some forms of systems programming such as lexers and parsers. Whether the automaton… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”