Cold air intake

Cold air intake

A cold air intake is an aftermarket assembly of parts used to bring relatively cool air into a car's internal-combustion engine.

Most vehicles manufactured since the mid-1970s have thermostatic air intake systems that regulate the temperature of the air entering the engine's intake tract, providing warm air when the engine is cold and cold air when the engine is warm to maximize performance, efficiency, and fuel economy. Aftermarket cold air intake systems are marketed with claims of increased engine efficiency and performance. The putative principle behind a cold air intake is that cooler air has a higher density, thus containing more oxygen per volume unit than warmer air.

Contents

Design features

Some strategies used in designing aftermarket cold air intakes are:

  • Reworking parts of the intake that create turbulence to reduce air resistance.[1]
  • Providing a more direct route to the air intake by eliminating muffling devices.
  • Shortening the length of the intake.
  • Using a less restrictive air filter, usually trading filtering quality for increased airflow capacity (this may be of dubious benefit).[2]
  • Placing the intake duct so as to use the ram-air effect to give positive pressure at speed.[3]

Risks

Aftermarket cold air intakes can pose a risk of damage to the vehicle.

  • Hydrolock - The intake opening is closer to the street than an original-equipment air intake, and more likely to introduce water into the engine when fording streams or flooded roads.
  • Noise - Stock air filtration systems usually include resonator-based muffling tubes. Removing them reduces pumping losses but increases noise.
  • Can void the vehicle warranty.

Construction

Intake systems come in many different styles and can be constructed from plastic, metal, rubber (silicone) or composite materials (fiberglass, carbon fiber or Kevlar). The most efficient intake systems utilize an airbox which is sized to complement the engine and will extend the powerband of the engine. The intake snorkel (opening for the intake air to enter the system) must be large enough to ensure sufficient air is available to the engine under all conditions from idle to full throttle.

The most basic cold air intake consists of a short metal or plastic tube leading to a conical air filter. Power may be lost at certain engine speeds and gained at others. Because of the reduced covering, intake noise is usually increased.

Some intakes use heat shields to isolate the air filter from the rest of the engine compartment, providing cooler air from the front or side of the engine bay. Some systems called "fender mount" move the filter into the fender wall, this system draws air up through the fender wall which provides even more isolation and still cooler air.

See also

References

  1. ^ http://autospeed.com/cms/title_Shielded-Sucker/A_109356/article.html
  2. ^ http://autospeed.com/cms/title_FreeFlowing-a-Miata-MX5/A_110680/article.html
  3. ^ http://autospeed.com/cms/title_Siting-Cold-Air-Intakes/A_1023/article.html

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • cold air intake — The induction system forces cold air into the combustion chamber. Because cold air is more dense than warm air, it contains more oxygen molecules. With more oxygen, fuel will burn more effectively and thus increase horsepower …   Dictionary of automotive terms

  • air intake — The opening through which air enters a component such as the carburetor, fuel injection system, radiator, heating system, or ventilation system. See cold air intake …   Dictionary of automotive terms

  • Ram-air intake — A ram air intake is any intake design which uses the dynamic air pressure created by vehicle motion to increase the static air pressure inside of the intake manifold on an engine, thus allowing a greater massflow through the engine and hence… …   Wikipedia

  • Warm air intake — A warm air intake or WAI is a system to decrease the amount of the air going into a car for the purpose of increasing the fuel economy of the internal combustion engine. This term may also be used to describe a short ram air intake, a totally… …   Wikipedia

  • Short ram air intake — The short ram air intake is a form of aftermarket air intake for automobiles with internal combustion engines.It basically replaces the OEM air intake with a short metal pipe and air filter inside the engine bay. This can slightly boost… …   Wikipedia

  • Intake — An intake , or especially for aircraft inlet, is an air intake for an engine. Because the modern internal combustion engine is in essence a powerful air pump, like the exhaust system on an engine, the intake must be carefully engineered and tuned …   Wikipedia

  • intake — See air intake cold air intake heated intake intake manifold intake port intake stroke intake tract intake stroke intake valve ram intake manifold …   Dictionary of automotive terms

  • Cold wave — For the musical genre, see Coldwave. Part of the Nature series on Weather   Calendar seasons Spring  …   Wikipedia

  • Air conditioner — For general aspects of air conditioning, see Air conditioning. A typical home air conditioning unit. An air conditioner (often referred to as AC) is a home appliance, system, or mechanism designed to dehumidify and extract heat from an area. The… …   Wikipedia

  • Air-fuel ratio meter — An air fuel ratio meter monitors the air fuel ratio of an internal combustion engine. Also called air fuel ratio gauge, air fuel meter, or air fuel gauge. It reads the voltage output of an oxygen sensor, sometimes also called lambda sensor,… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”