Cosmic distance ladder

Cosmic distance ladder
* Light green boxes: Technique applicable to star-forming galaxies. * Light blue boxes: Technique applicable to Population II galaxies. * Light Purple boxes: Geometric distance technique. * Light Red box: The planetary nebula luminosity function technique is applicable to all populations of the Virgo Supercluster. * Solid black lines: Well calibrated ladder step. * Dashed black lines: Uncertain calibration ladder step.

The cosmic distance ladder (also known as the Extragalactic Distance Scale) is the succession of methods by which astronomers determine the distances to celestial objects. A real direct distance measurement of an astronomical object is possible only for those objects that are "close enough" (within about a thousand parsecs) to Earth. The techniques for determining distances to more distant objects are all based on various measured correlations between methods that work at close distances with methods that work at larger distances. Several methods rely on a standard candle, which is an astronomical object that has a known luminosity.

The ladder analogy arises because no one technique can measure distances at all ranges encountered in astronomy. Instead, one method can be used to measure nearby distances, a second can be used to measure nearby to intermediate distances, and so on. Each rung of the ladder provides information that can be used to determine the distances at the next higher rung.

Contents

Direct measurement

Statue of an astronomer and the concept of the cosmic distance ladder by the parallax method, made from the azimuth ring and other parts of the Yale-Columbia Refractor (telescope) (c 1925) wrecked by the 2003 Canberra bushfires which burned out the Mount Stromlo Observatory; at Questacon, Canberra, Australian Capital Territory.

At the base of the ladder are fundamental distance measurements, in which distances are determined directly, with no physical assumptions about the nature of the object in question. The precise measurement of stellar positions is part of the discipline of astrometry.

Astronomical unit

Direct distance measurements are based upon precise determination of the distance between the Earth and the Sun, which is called the Astronomical Unit (AU). Historically, observations of transits of Venus were crucial in determining the AU; in the first half of the 20th Century, observations of asteroids were also important. Presently the AU is determined with high precision using radar measurements of Venus and other nearby planets and asteroids,[1] and by tracking interplanetary spacecraft in their orbits around the Sun through the Solar System. Kepler's Laws provide precise ratios of the sizes of the orbits of objects revolving around the Sun, but not a real measure of the orbits themselves. Radar provides a value in kilometers for the difference in two orbits' sizes, and from that and the ratio of the two orbit sizes, the size of Earth's orbit comes directly.

Parallax

The most important fundamental distance measurements come from trigonometric parallax. As the Earth orbits around the Sun, the position of nearby stars will appear to shift slightly against the more distant background. These shifts are angles in a right triangle, with 2 AU making the short leg of the triangle and the distance to the star being the long leg. The amount of shift is quite small, measuring 1 arcseconds for an object at a distance of 1 parsec (3.26 light-years), thereafter decreasing in angular amount as the reciprocal of the distance. Astronomers usually express distances in units of parsecs; light-years are used in popular media, but almost invariably values in light-years have been converted from numbers tabulated in parsecs in the original source.

Because parallax becomes smaller for a greater stellar distance, useful distances can be measured only for stars whose parallax is larger than the precision of the measurement. Parallax measurements typically have an accuracy measured in milliarcseconds.[2] In the 1990s, for example, the Hipparcos mission obtained parallaxes for over a hundred thousand stars with a precision of about a milliarcsecond,[3] providing useful distances for stars out to a few hundred parsecs.

Stars can have a velocity relative to the Sun that causes proper motion and radial velocity. The former is determined by plotting the changing position of the stars over many years, while the latter comes from measuring the Doppler shift in their spectrum caused by motion along the line of sight. For a group of stars with the same spectral class and a similar magnitude range, a mean parallax can be derived from statistical analysis of the proper motions relative to their radial velocities. This statistical parallax method is useful for measuring the distances of bright stars beyond 50 parsecs and giant variable stars, including Cepheids and the RR Lyrae variables.[4]

The motion of the Sun through space provides a longer baseline that will increase the accuracy of parallax measurements, known as secular parallax. For stars in the Milky Way disk, this corresponds to a mean baseline of 4 A.U. per year, while for halo stars the baseline is 40 A.U. per year. After several decades, the baseline can be orders of magnitude greater than the Earth-Sun baseline used for traditional parallax. However, secular parallax introduces a higher level of uncertainty because the relative velocity of other stars is an additional unknown. When applied to samples of multiple stars, the uncertainty can be reduced; the precision is inversely proportion to the square root of the sample size.[5]

Moving cluster parallax is a technique where the motions of individual stars in a nearby star cluster can be used to find the distance to the cluster. Only open clusters are near enough for this technique to be useful. In particular the distance obtained for the Hyades has been an important step in the distance ladder.

Other individual objects can have fundamental distance estimates made for them under special circumstances. If the expansion of a gas cloud, like a supernova remnant or planetary nebula, can be observed over time, then an expansion parallax distance to that cloud can be estimated. Binary stars which are both visual and spectroscopic binaries also can have their distance estimated by similar means. The common characteristic to these is that a measurement of angular motion is combined with a measurement of the absolute velocity (usually obtained via the Doppler effect). The distance estimate comes from computing how far away the object must be to make its observed absolute velocity appear with the observed angular motion.

Expansion parallaxes in particular can give fundamental distance estimates for objects that are very far away, because supernova ejecta have large expansion velocities and large sizes (compared to stars). Further, they can be observed with radio interferometers which can measure very small angular motions. These combine to mean that some supernovae in other galaxies have fundamental distance estimates.[6] Though valuable, such cases are quite rare, so they serve as important consistency checks on the distance ladder rather than workhorse steps by themselves.

Standard candles

Almost all of the physical distance indicators are standard candles. These are objects that belong to some class that have a known brightness. By comparing the known luminosity of the latter to its observed brightness, the distance to the object can be computed using the inverse square law. These objects of known brightness are termed standard candles.

In astronomy, the brightness of an object is given in terms of its absolute magnitude. This quantity is derived from the logarithm of its luminosity as seen from a distance of 10 parsecs. The apparent magnitude, or the magnitude as seen by the observer, can be used to determine the distance D to the object in kiloparsecs (where 1 kpc equals 103 parsecs) as follows:

\begin{smallmatrix}5 \cdot \log_{10} \frac{D}{\mathrm{kpc}}\ =\ m\ -\ M\ -\ 10,\end{smallmatrix}

where m the apparent magnitude and M the absolute magnitude. For this to be accurate, both magnitudes must be in the same frequency band and there can be no relative motion in the radial direction.

Some means of accounting for interstellar extinction, which also makes objects appear fainter and more red, is also needed. The difference between absolute and apparent magnitudes is called the distance modulus, and astronomical distances, especially intergalactic ones, are sometimes tabulated in this way.

Problems

Two problems exist for any class of standard candle. The principal one is calibration, determining exactly what the absolute magnitude of the candle is. This includes defining the class well enough that members can be recognized, and finding enough members with well-known distances that their true absolute magnitude can be determined with enough accuracy. The second lies in recognizing members of the class, and not mistakenly using the standard candle calibration upon an object which does not belong to the class. At extreme distances, which is where one most wishes to use a distance indicator, this recognition problem can be quite serious.

A significant issue with standard candles is the recurring question of how standard they are. For example, all observations seem to indicate that type Ia supernovae that are of known distance have the same brightness (corrected by the shape of the light curve). The basis for this closeness in brightness is discussed below; however, the possibility that the distant type Ia supernovae have different properties than nearby type Ia supernovae exists. The use of Supernovae type Ia is crucial in determining the correct cosmological model. If indeed the properties of Supernovae type Ia are different at large distances, i.e. if the extrapolation of their calibration to arbitrary distances is not valid, ignoring this variation can dangerously bias the reconstruction of the cosmological parameters, in particular the reconstruction of the matter density parameter.[7]

That this is not merely a philosophical issue can be seen from the history of distance measurements using Cepheid variables. In the 1950s, Walter Baade discovered that the nearby Cepheid variables used to calibrate the standard candle were of a different type than the ones used to measure distances to nearby galaxies. The nearby Cepheid variables were population I stars with much higher metal content than the distant population II stars. As a result, the population II stars were actually much brighter than believed, and this had the effect of doubling the distances to the globular clusters, the nearby galaxies, and the diameter of the Milky Way.

(Another class of physical distance indicator is the standard ruler. In 2008, galaxy diameters have been proposed as a possible standard ruler for cosmological parameter determination.[8])

Galactic distance indicators

With few exceptions, distances based on direct measurements are available only out to about a thousand parsecs, which is a modest portion of our own Galaxy. For distances beyond that, measures depend upon physical assumptions, that is, the assertion that one recognizes the object in question, and the class of objects is homogeneous enough that its members can be used for meaningful estimation of distance.

Physical distance indicators, used on progressively larger distance scales, include:

  • Dynamical parallax, using orbital parameters of visual binaries to measure the mass of the system and the mass-luminosity relation to determine the luminosity
    • Eclipsing binaries — In the last decade, measurement of eclipsing binaries' fundamental parameters has become possible with 8 meter class telescopes. This makes it feasible to use them as indicators of distance. Recently, they have been used to give direct distance estimates to the LMC, SMC, Andromeda Galaxy and Triangulum Galaxy. Eclipsing binaries offer a direct method to gauge the distance to galaxies to a new improved 5% level of accuracy which is feasible with current technology up to a distance of around 3 Mpc.[9]
  • RR Lyrae variables — red giants typically used for measuring distances within the galaxy and in nearby globular clusters.
  • The following four indicators all use stars in the old stellar populations (Population II):[10]
  • In galactic astronomy, X-ray bursts (thermonuclear flashes on the surface of a neutron star) are used as standard candles. Observations of X-ray burst sometimes show X-ray spectra indicating radius expansion. Therefore, the X-ray flux at the peak of the burst should correspond to Eddington luminosity, which can be calculated once the mass of the neutron star is known (1.5 solar masses is a commonly used assumption). This method allows distance determination of some low-mass X-ray binaries. Low-mass X-ray binaries are very faint in the optical, making measuring their distances extremely difficult.
  • Cepheids and novae
  • Individual galaxies in clusters of galaxies
  • The Tully-Fisher relation
  • The Faber-Jackson relation
  • Type Ia supernovae that have a very well-determined maximum absolute magnitude as a function of the shape of their light curve and are useful in determining extragalactic distances up to a few hundred Mpc.[11] A notable exception is SN 2003fg, the "Champagne Supernova," a type Ia supernova of unusual nature.
  • Redshifts and Hubble's Law

Main sequence fitting

When the absolute magnitude for a group of stars is plotted against the spectral classification of the star, in a Hertzsprung-Russell diagram, evolutionary patterns are found that relate to the mass, age and composition of the star. In particular, during their hydrogen burning period, stars lie along a curve in the diagram called the main sequence. By measuring these properties from a star's spectrum, the position of a main sequence star on the H-R diagram can be determined, and thereby the star's absolute magnitude estimated. A comparison of this value with the apparent magnitude allows the approximate distance to be determined, after correcting for interstellar extinction of the luminosity because of gas and dust.

In a gravitationally-bound star cluster such as the Hyades, the stars formed at approximately the same age and lie at the same distance. This allows relatively accurate main sequence fitting, providing both age and distance determination.

Extragalactic distance scale

Extragalactic distance indicators[12]
Method Uncertainty for Single Galaxy (mag) Distance to Virgo Cluster (Mpc) Range (Mpc)
Classical Cepheids 0.16 15 - 25 29
Novae 0.4 21.1 ± 3.9 20
Planetary Nebula Luminosity Function 0.3 15.4 ± 1.1 50
Globular Cluster Luminosity Function 0.4 18.8 ± 3.8 50
Surface Brightness Fluctuations 0.3 15.9 ± 0.9 50
D - σ relation 0.5 16.8 ± 2.4 > 100
Type Ia Supernovae 0.10 19.4 ± 5.0 > 1000

The extragalactic distance scale is a series of techniques used today by astronomers to determine the distance of cosmological bodies beyond our own galaxy, which are not easily obtained with traditional methods. Some procedures utilize properties of these objects, such as stars, globular clusters, nebulae, and galaxies as a whole. Other methods are based more on the statistics and probabilities of things such as entire galaxy clusters.

Wilson-Bappu Effect

Discovered in 1956 by Olin Wilson and M.K. Vainu Bappu, The Wilson-Bappu Effect utilizes the effect known as spectroscopic parallax. Certain stars have features in their emission/absorption spectra allowing relatively easy absolute magnitude calculation. Certain spectral lines are directly related to an object's magnitude, such as the K absorption line of calcium. Distance to the star can be calculated from magnitude by the distance modulus:

\ M - m = - 2.5 \log_{10}(F_1/F_2) \,.

Though in theory this method has the ability to provide reliable distance calculations to stars roughly 7 megaparsecs (Mpc) away, it is generally only used for stars hundreds of kiloparsecs (kpc) away.

This method is only valid for stars over 15 magnitudes.

Classical Cepheids

Beyond the reach of the Wilson-Bappu effect, the next method relies on the period-luminosity relation of classical Cepheid variable stars, first discovered by Henrietta Leavitt. The following relation can be used to calculate the distance to Galactic and extragalactic classical Cepheids:

 5\log_{10}{d}=V+ (3.43) \log_{10}{P} - (2.58) (V-I) + 7.50 \,. [13]

Several problems complicate the use of Cepheids as standard candles and are actively debated, chief among them are: the nature and linearity of the period-luminosity relation in various passbands and the impact of metallicity on both the zero-point and slope of those relations, and the effects of photometric contamination (blending) and a changing (typically unknown) extinction law on Cepheid distances.[14][15][16][17][18][19][20][21][22]

These unresolved matters have resulted in cited values for the Hubble Constant ranging between 60 km/s/Mpc and 80 km/s/Mpc. Resolving this discrepancy is one of the foremost problems in astronomy since the cosmological parameters of the Universe may be constrained by supplying a precise value of the Hubble constant.[23][24]

Cepheid variable stars were the key instrument in Edwin Hubble’s 1923 conclusion that M31 (Andromeda) was an external galaxy, as opposed to a smaller nebula within the Milky Way. He was able to calculate the distance of M31 to 285 Kpc, today’s value being 770 Kpc.

As detected thus far, NGC 3370, a spiral galaxy in the constellation Leo, contains the farthest Cepheids yet found at a distance of 29 Mpc. Cepheid variable stars are in no way perfect distance markers: at nearby galaxies they have an error of about 7% and up to a 15% error for the most distant.

Supernovae

SN 1994D in the NGC 4526 galaxy (bright spot on the lower left). Image by NASA, ESA, The Hubble Key Project Team, and The High-Z Supernova Search Team

There are several different methods for which supernovae can be used to measure extragalactic distances, here we cover the most used.

Measuring a supernova's photosphere

We can assume that a supernova expands spherically symmetric. If the supernova is close enough such that we can measure the angular extent, θ(t), of its photosphere, we can use the equation

\ {\omega} = \frac{{\Delta}{\theta}}{{\Delta}{t}} \,..

Where ω is angular velocity, θ is angular extent. In order to get an accurate measurement, it is necessary to make two observations separated by time Δt. Subsequently, we can use

\ d = \frac{V_{ej}}{\omega} \,..

Where d is the distance to the SN, Vej is the supernova's ejecta's radial velocity (it can be assumed that Vej equals Vθ if spherically symmetric).

This method works only if the supernova is close enough to be able to measure accurately the photosphere. Similarly, the expanding shell of gas is in fact not perfectly spherical nor a perfect blackbody. Also interstellar extinction can hinder the accurate measurements of the photosphere. This problem is further exacerbated by core-collapse supernova. All of these factors contribute to the distance error of up to 25%.

Type Ia light curves

Type Ia SN are some of the best ways to determine extragalactic distances. Ia's occur when a binary white dwarf star begins to accrete matter from its companion Red Dwarf star. As the white dwarf gains matter, eventually it reaches its Chandrasekhar Limit of  1.4 M_{\odot} . Once reached, the star becomes unstable and undergoes a runaway nuclear fusion reaction. Because all Type Ia SN explode at about the same mass, their absolute magnitudes are all the same. This makes them very useful as standard candles. All type Ia SN have a standard blue and visual magnitude of

\ M_B \approx M_V \approx -19.3 \pm 0.3 \,.

Therefore, when observing a type Ia SN, if it is possible to determine what its peak magnitude was, then its distance can be calculated. It is not intrinsically necessary to capture the SN directly at its peak magnitude; using the multicolor light curve shape method (MLCS), the shape of the light curve (taken at any reasonable time after the initial explosion) is compared to a family of parameterized curves that will determine the absolute magnitude at the maximum brightness. This method also takes into effect interstellar extinction/dimming from dust and gas.

Similarly, the stretch method fits the particular SN magnitude light curves to a template light curve. This template, as opposed to being several light curves at different wavelengths (MLCS) is just a single light curve that has been stretched (or compressed) in time. By using this Stretch Factor, the peak magnitude can be determined[citation needed].

Using Type Ia SN is one of the most accurate methods, particularly since SN explosions can be visible at great distances (their luminosities rival that of the galaxy in which they are situated), much farther than Cepheid Variables (500 times farther). Much time has been devoted to the refining of this method. The current uncertainty approaches a mere 5%, corresponding to an uncertainty of just 0.1 magnitudes.

Novae in distance determinations

Novae can be used in much the same way as supernovae to derive extragalactic distances. There is a direct relation between a nova's max magnitude and the time for its visible light to decline by two magnitudes. This relation is shown to be:

\ M^{max}_{V} = -9.96 - 2.31 \log_{10} \dot{x} \,.

Where \dot{x} is the time derivative of the nova's mag, describing the average rate of decline over the first 2 magnitudes.

After novae fade, they are about as bright as the most luminous Cepheid Variable stars, therefore both these techniques have about the same max distance: ~ 20 Mpc. The error in this method produces an uncertainty in magnitude of about ± 0.4

Globular cluster luminosity function

Based on the method of comparing the luminosities of globular clusters (located in galactic halos) from distant galaxies to that of the Virgo cluster, the globular cluster luminosity function carries an uncertainty of distance of about 20% (or .4 magnitudes).

US astronomer William Alvin Baum first attempted to use globular clusters to measure distant elliptical galaxies. He compared the brightest globular clusters in Virgo A galaxy with those in Andromeda, assuming the luminosities of the clusters were the same in both. Knowing the distance to Andromeda, has assumed a direct correlation and estimated Virgo A’s distance.

Baum used just a single globular cluster, but individual formations are often poor standard candles. Canadian astronomer Racine assumed the use of the globular cluster luminosity function (GCLF) would lead to a better approximation. The number of globular clusters as a function of magnitude given by:

\ \Phi (m) = A e^{(m-m_0)^2/2{\sigma}^2} \,.

Where m0 is the turnover magnitude, and M0 the magnitude of the Virgo cluster, sigma the dispersion ~ 1.4 mag.

It is important to remember that it is assumed that globular clusters all have roughly the same luminosities within the universe. There is no universal globular cluster luminosity function that applies to all galaxies.

Planetary nebula luminosity function

Like the GCLF method, a similar numerical analysis can be used for planetary nebulae (note the use of more than one!) within far off galaxies. The planetary nebula luminosity function (PNLF) was first proposed in the late 1970s by Holland Cole and David Jenner. They suggested that all planetary nebulae might all have similar maximum intrinsic brightness, now calculated to be M = -4.53. This would therefore make them potential standard candles for determining extragalactic distances.

Astronomer George Howard Jacoby and his fellow colleagues later proposed that the PNLF function equaled:

\ N (M) \propto e^{0.307 M} (1 - e^{3(M^{*} - M)} )  \,.

Where N(M) is number of planetary nebula, having absolute magnitude M. M* is equal to the nebula with the brightest magnitude.

Surface brightness fluctuation method

Galaxy cluster

The following method deals with the overall inherent properties of galaxies. These methods, though with varying error percentages, have the ability to make distance estimates beyond 100 Mpc, though it is usually applied more locally.

The surface brightness fluctuation (SBF) method takes advantage of the use of CCD cameras on telescopes. Because of spatial fluctuations in a galaxy’s surface brightness, some pixels on these cameras will pick up more stars than others. However, as distance increases the picture will become increasingly smoother. Analysis of this describes a magnitude of the pixel-to-pixel variation, which is directly related to a galaxy’s distance.

D-σ Relation

The D- σ relation, used in elliptical galaxies, relates the angular diameter (D) of the galaxy to its velocity dispersion. It is important to describe exactly what D represents in order to have a more fitting understanding of this method. It is, more precisely, the galaxy’s angular diameter out to the surface brightness level of 20.75 B-mag arcsec − 2. This surface brightness is independent of the galaxy’s actual distance from us. Instead, D is inversely proportional to the galaxy’s distance, represented as d. So instead of this relation imploring standard candles, instead D provides a standard ruler. This relation between D and σ is

 \log_{10}(D) = 1.333 \log (\sigma) + C \,.

Where C is a constant which depends on the distance to the galaxy clusters.

This method has the possibility of become one of the strongest methods of galactic distance calculators, perhaps exceeding the range of even the Tully-Fisher method. As of today, however, elliptical galaxies aren’t bright enough to provide a calibration for this method through the use of techniques such as Cepheids. So instead calibration is done using more crude methods.

Overlap and scaling

A succession of distance indicators, which is the distance ladder, is needed for determining distances to other galaxies. The reason is that objects bright enough to be recognized and measured at such distances are so rare that few or none are present nearby, so there are too few examples close enough with reliable trigonometric parallax to calibrate the indicator. For example, Cepheid variables, one of the best indicators for nearby spiral galaxies, cannot be satisfactorily calibrated by parallax alone. The situation is further complicated by the fact that different stellar populations generally do not have all types of stars in them. Cepheids in particular are massive stars, with short lifetimes, so they will only be found in places where stars have very recently been formed. Consequently, because elliptical galaxies usually have long ceased to have large-scale star formation, they will not have Cepheids. Instead, distance indicators whose origins are in an older stellar population (like novae and RR Lyrae variables) must be used. However, RR Lyrae variables are less luminous than Cepheids (so they cannot be seen as far away as Cepheids can), and novae are unpredictable and an intensive monitoring program — and luck during that program — is needed to gather enough novae in the target galaxy for a good distance estimate.

Because the more distant steps of the cosmic distance ladder depend upon the nearer ones, the more distant steps include the effects of errors in the nearer steps, both systematic and statistical ones. The result of these propagating errors means that distances in astronomy are rarely known to the same level of precision as measurements in the other sciences, and that the precision necessarily is poorer for more distant types of object.

Another concern, especially for the very brightest standard candles, is their "standardness": how homogeneous the objects are in their true absolute magnitude. For some of these different standard candles, the homogeneity is based on theories about the formation and evolution of stars and galaxies, and is thus also subject to uncertainties in those aspects. For the most luminous of distance indicators, the Type Ia supernovae, this homogeneity is known to be poor[citation needed]; however, no other class of object is bright enough to be detected at such large distances, so the class is useful simply because there is no real alternative.

The observational result of Hubble's Law, the proportional relationship between distance and the speed with which a galaxy is moving away from us (usually referred to as redshift) is a product of the cosmic distance ladder. Hubble observed that fainter galaxies are more redshifted. Finding the value of the Hubble constant was the result of decades of work by many astronomers, both in amassing the measurements of galaxy redshifts and in calibrating the steps of the distance ladder. Hubble's Law is the primary means we have for estimating the distances of quasars and distant galaxies in which individual distance indicators cannot be seen.

See also

References

  1. ^ Ash, M.E., Shapiro, I.I., & Smith, W.B., 1967 Astronomical Journal, 72, 338-350.
  2. ^ Staff. "Trigonometric Parallax". The SAO Encyclopedia of Astronomy. Swinburne Centre for Astrophysics and Supercomputing. http://astronomy.swin.edu.au/cosmos/T/Trigonometric+Parallax. Retrieved 2008-10-18. 
  3. ^ Perryman, M. A. C.; et al. (1999). "The HIPPARCOS Catalogue". Astronomy and Astrophysics 323: L49–L52. Bibcode 1997A&A...323L..49P. 
  4. ^ Basu, Baidyanath (2003). An Introduction to Astrophysics. PHI Learning Private Limited. ISBN 8120311213. 
  5. ^ Popowski, Piotr; Gould, Andrew (1998-01-29). "Mathematics of Statistical Parallax and the Local Distance Scale". arXiv:astro-ph/9703140 [astro-ph]. 
  6. ^ Bartel, N., et al., 1994, "The shape, expansion rate and distance of supernova 1993J from VLBI measurements", Nature 368, 610-613
  7. ^ Linden, Sebastian; Virey, Jean-Marc; Tilquin, André (2009). "Cosmological parameter extraction and biases from type Ia supernova magnitude evolution". A&A 506 (3): 1095–1105. Bibcode 2009A&A...506.1095L. doi:10.1051/0004-6361/200912811. , and references therein.
  8. ^ Marinoni, C.; Saintonge, A.; Giovanelli, R.; Haynes, M. P.; Masters, J.-M.; Le Fèvre, O.; Mazure, A.; Taxil, P. et al. (2008). "Geometrical tests of cosmological models. I. Probing dark energy using the kinematics of high redshift galaxies". A&A 478 (1): 43–55. Bibcode 2008A&A...478...43M. doi:10.1051/0004-6361:20077116. 
  9. ^ Bonanos, Alceste Z. (2006). "Eclipsing Binaries: Tools for Calibrating the Extragalactic Distance Scale". Binary Stars as Critical Tools and Tests in Contemporary Astrophysics, International Astronomical Union. Symposium no. 240, held 22–25 August 2006 in Prague, Czech Republic, S240, #008 240: 79. arXiv:astro-ph/0610923. Bibcode 2007IAUS..240...79B. doi:10.1017/S1743921307003845. 
  10. ^ Ferrarese, Laura; Ford, Holland C.; Huchra, John; Kennicutt, Robert C., Jr.; Mould, Jeremy R.; Sakai, Shoko; Freedman, Wendy L.; Stetson, Peter B.; Madore, Barry F.; Gibson, Brad K.; Graham, John A.; Hughes, Shaun M.; Illingworth, Garth D.; Kelson, Daniel D.; Macri, Lucas; Sebo, Kim; Silbermann, N. A. (2000). "A Database of Cepheid Distance Moduli and Tip of the Red Giant Branch, Globular Cluster Luminosity Function, Planetary Nebula Luminosity Function, and Surface Brightness Fluctuation Data Useful for Distance Determinations". The Astrophysical Journal Supplement Series 128 (2): 431–459. arXiv:astro-ph/9910501. Bibcode 2000ApJS..128..431F. doi:10.1086/313391. 
  11. ^ S. A. Colgate (1979). "Supernovae as a standard candle for cosmology". Astrophysical Journal 232 (1): 404–408. Bibcode 1979ApJ...232..404C. doi:10.1086/157300. 
  12. ^ Adapted from Jacoby et al., Publ. Astron. Soc. Pac., 104, 499, 1992
  13. ^ "Assessing potential cluster Cepheids from a new distance and reddening parameterization and 2MASS photometry". MNRAS. arXiv:0808.2937. Bibcode 2008MNRAS.390.1539M. doi:10.1111/j.1365-2966.2008.13834.x. 
  14. ^ Stanek, K. Z.; Udalski, A. (1999). "The Optical Gravitational Lensing Experiment. Investigating the Influence of Blending on the Cepheid Distance Scale with Cepheids in the Large Magellanic Cloud". Eprint arXiv:astro-ph/9909346: 9346. arXiv:astro-ph/9909346. Bibcode 1999astro.ph..9346S. 
  15. ^ Udalski, A.; Wyrzykowski, L.; Pietrzynski, G.; Szewczyk, O.; Szymanski, M.; Kubiak, M.; Soszynski, I.; Zebrun, K. (2001). "The Optical Gravitational Lensing Experiment. Cepheids in the Galaxy IC1613: No Dependence of the Period-Luminosity Relation on Metallicity". Acta Astronomica 51: 221. arXiv:astro-ph/0109446. Bibcode 2001AcA....51..221U. 
  16. ^ Ngeow, C.; Kanbur, S. M. (2006). "The Hubble Constant from Type Ia Supernovae Calibrated with the Linear and Nonlinear Cepheid Period-Luminosity Relations". The Astrophysical Journal 642: L29. arXiv:astro-ph/0603643. Bibcode 2006ApJ...642L..29N. doi:10.1086/504478. 
  17. ^ Macri, L. M.; Stanek, K. Z.; Bersier, D.; Greenhill, L. J.; Reid, M. J. (2006). "A New Cepheid Distance to the Maser-Host Galaxy NGC 4258 and Its Implications for the Hubble Constant". The Astrophysical Journal 652 (2): 1133. arXiv:astro-ph/0608211. Bibcode 2006ApJ...652.1133M. doi:10.1086/508530. 
  18. ^ Bono, G.; Caputo, F.; Fiorentino, G.; Marconi, M.; Musella, I. (2008). "Cepheids in External Galaxies. I. The Maser-Host Galaxy NGC 4258 and the Metallicity Dependence of Period-Luminosity and Period-Wesenheit Relations". The Astrophysical Journal 684: 102. Bibcode 2008ApJ...684..102B. doi:10.1086/589965. 
  19. ^ Majaess, D.; Turner, D.; Lane, D. (2009). "Type II Cepheids as Extragalactic Distance Candles". Acta Astronomica 59: 403. Bibcode 2009AcA....59..403M. 
  20. ^ Madore, Barry F.; Freedman, Wendy L. (2009). "Concerning the Slope of the Cepheid Period-Luminosity Relation". The Astrophysical Journal 696 (2): 1498. Bibcode 2009ApJ...696.1498M. doi:10.1088/0004-637X/696/2/1498. 
  21. ^ Scowcroft, V.; Bersier, D.; Mould, J. R.; Wood, P. R. (2009). "The effect of metallicity on Cepheid magnitudes and the distance to M33". Monthly Notices of the Royal Astronomical Society 396 (3): 1287. Bibcode 2009MNRAS.396.1287S. doi:10.1111/j.1365-2966.2009.14822.x. 
  22. ^ Majaess, D. (2010). "The Cepheids of Centaurus A (NGC 5128) and Implications for H0". Acta Astronomica 60: 121. Bibcode 2010AcA....60..121M. 
  23. ^ Annual Review of Astronomy and Astrophysics. Bibcode 2008A&ARv..15..289T. doi:10.1007/s00159-008-0012-y. 
  24. ^ Annual Review of Astronomy and Astrophysics. Bibcode 2010ARA&A..48..673F. doi:10.1146/annurev-astro-082708-101829. 

Further reading

  • An Introduction to Modern Astrophysics, Carroll and Ostlie, copyright 2007
  • Measuring the Universe The Cosmological Distance Ladder, Stephen Webb, copyright 2001
  • The Cosmos, Pasachoff and Filippenko, copyright 2007
  • The Astrophysical Journal, The Globular Cluster Luminosity Function as a Distance Indicator: Dynamical Effects, Ostriker and Gnedin, May 5, 1997

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Distance (disambiguation) — Distance is a numerical description of how far apart objects are. Distance may also refer to: Distance (band), a late 1980s rock supergroup featuring Bernard Edwards and Tony Thompson The distance (boxing), a term for boxing in which a fight goes …   Wikipedia

  • Distance measures (cosmology) — Physical cosmology Universe · Big Bang …   Wikipedia

  • Distance — This article is about distance in the mathematical or physical sense. For other senses of the term, see distance (disambiguation). Proximity redirects here. For the 2001 film, see Proximity (film). Distance (or farness) is a numerical description …   Wikipedia

  • Extragalactic distance scale — The extragalactic distance scale is a series of techniques used today by astronomers to determine the distance of cosmological bodies (beyond our own galaxy) not easily obtained with traditional methods. Some procedures utilize properties of… …   Wikipedia

  • Comoving distance — Physical cosmology Universe · Big Bang …   Wikipedia

  • Observational cosmology — Physical cosmology Universe · Big Bang …   Wikipedia

  • Big Bang — This article is about the cosmological model. For the sitcom, see The Big Bang Theory. For other uses, see Big Bang (disambiguation) …   Wikipedia

  • Pleiades — This article is about the star cluster. For other uses, see Pleiades (disambiguation). Pleiades A color composite image of the Pleiades from the Digitized Sky Survey. Credit: NASA/ESA/AURA/Caltech …   Wikipedia

  • Parsec — For other uses, see Parsec (disambiguation). 1 parsec = SI units 30.857×10^12 km 30.857×10^15 m Astronomical units 206.26× …   Wikipedia

  • Hubble's law — Physical cosmology Universe · Big Bang …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”