Routing table

Routing table

In computer networking a routing table, or Routing Information Base (RIB), is a data table stored in a router or a networked computer that lists the routes to particular network destinations, and in some cases, metrics (distances) associated with those routes. The routing table contains information about the topology of the network immediately around it. The construction of routing tables is the primary goal of routing protocols. Static routes are entries made in a routing table by non-automatic means and which are fixed rather than being the result of some network topology 'discovery' procedure.

Contents

Basics

A routing table utilizes the same idea that one does when using a map in package delivery. Whenever a node needs to send data to another node on a network, it must know where to send it, first. If the node cannot directly connect to the destination node, it has to send it via other nodes along a proper route to the destination node. Most nodes do not try to figure out which route(s) might work; instead, a node will send an IP packet to a gateway in the LAN, which then decides how to route the "package" of data to the correct destination. Each gateway will need to keep track of which way to deliver various packages of data, and for this it uses a Routing Table. A routing table is a database which keeps track of paths, like a map, and allows the gateway to provide this information to the node requesting the information.

With hop-by-hop routing, each routing table lists, for all reachable destinations, the address of the next device along the path to that destination: the next hop. Assuming that the routing tables are consistent, the simple algorithm of relaying packets to their destination's next hop thus suffices to deliver data anywhere in a network. Hop-by-hop is the fundamental characteristic of the IP Internetwork Layer [1] and the OSI Network Layer.

Difficulties with routing tables

The need to record routes to large numbers of devices using limited storage space represents a major challenge in routing table construction. In the Internet, the currently dominant address aggregation technology is a bitwise prefix matching scheme called Classless Inter-Domain Routing (CIDR).

Since in a network each node presumably possesses a valid routing table, routing tables must be consistent among the various nodes or routing loops can develop. This is particularly problematic in the hop-by-hop routing model in which the net effect of inconsistent tables in several different routers could be to forward packets in an endless loop. Routing loops have historically plagued routing, and their avoidance is a major design goal of routing protocols.

Contents of routing tables

The routing table consists of at least three information fields:

  1. the network id: i.e. the destination network id
  2. cost: i.e. the cost or metric of the path through which the packet is to be sent
  3. next hop: The next hop, or gateway, is the address of the next station to which the packet is to be sent on the way to its final destination

Depending on the application and implementation, it can also contain additional values that refine path selection:

  1. quality of service associated with the route. For example, the U flag indicates that an IP route is up.
  2. links to filtering criteria/access lists associated with the route
  3. interface: such as eth0 for the first Ethernet card, eth1 for the second Ethernet card, etc.

Routing tables are also a key aspect of certain security operations, such as unicast reverse path forwarding (uRPF).[2] In this technique, which has several variants, the router also looks up, in the routing table, the source address of the packet. If there exists no route back to the source address, the packet is assumed to be malformed or involved in a network attack, and is dropped.

Network id Cost Next hop
........ ........ ........
........ ........ ........

Shown below is an example of what the table above could look like on an average computer connected to the internet via a home router:

Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.100 10
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.0.0 255.255.255.0 192.168.0.100 192.168.0.100 10
192.168.0.100 255.255.255.255 127.0.0.1 127.0.0.1 10
192.168.0.255 255.255.255.255 192.168.0.100 192.168.0.100 10
  • The columns Network Destination and Netmask together describe the Network id as mentioned earlier. For example, destination 192.168.0.0 and netmask 255.255.255.0 can be written as network id 192.168.0.0/24.
  • The Gateway column contains the same information as the Next hop, i. e. it points to the gateway through which the network can be reached.
  • The Interface indicates what locally available interface is responsible for reaching the gateway. In this example, gateway 192.168.0.1 (the internet router) can be reached through the local network card with address 192.168.0.100.
  • Finally, the Metric indicates the associated cost of using the indicated route. This is useful for determining the efficiency of a certain route from two points in a network. In this example, it is more efficient to communicate with the computer itself through the use of address 127.0.0.1 (called “localhost”) than it would be through 192.168.0.100 (the IP address of the local network card).

Forwarding table

Routing tables are generally not used directly for packet forwarding in modern router architectures; instead, they are used to generate the information for a smaller forwarding table. A forwarding table contains only the routes which are chosen by the routing algorithm as preferred routes for packet forwarding. It is often in a compressed or pre-compiled format that is optimized for hardware storage and lookup.

This router architecture separates the Control Plane function of the routing table from the Forwarding Plane function of the forwarding table. [3] This separation of control and forwarding provides uninterrupted forwarding in production environments, along with enhanced performance.

See also

References

  1. ^ Requirements for IPv4 Routers, F. Baker, RFC 1812, June 1995
  2. ^ Ingress Filtering for Multihomed Networks,RFC 3704, F. Baker & P. Savola,March 2004
  3. ^ Forwarding and Control Element Separation (ForCES) Framework, L. Yang et al., RFC3746,April 2004.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • routing table — maršrutų lentelė statusas T sritis automatika atitikmenys: angl. routing table vok. Leitwegtabelle, f rus. таблица маршрутов, f pranc. table d acheminement, f …   Automatikos terminų žodynas

  • routing table — maršrutų lentelė statusas T sritis informatika apibrėžtis Lentelė, į kurią surašyta informacija apie galimus maršrutus, kuriais ↑tinklų sietuvas arba ↑tinklų tiltas gali siųsti duomenų paketus į kitus tinklus. Lentelės informacija nuolat… …   Enciklopedinis kompiuterijos žodynas

  • Routing Table Maintenance Protocol — (RTMP) ist ein Begriff aus der Informatik. Das Routing Table Maintenance Protocol, oder kurz RTMP, ist ein Protokoll das die Routing Tabellen in kurzen Zeitabständen von 10 s in einem AppleTalk Netz aktualisiert. Es arbeitet nach dem Distance… …   Deutsch Wikipedia

  • Routing Table Maintenance Protocol — (RTMP) is a communication protocol used by AppleTalk to ensure that all routers on the network have consistent routing information …   Wikipedia

  • routing table —    A table stored in a router; used to keep track of routes to specific network destinations.    See also routing protocol …   Dictionary of networking

  • routing table —    A data matrix containing available routes and such parameters as user class of service and call destination; used by the switching software to select a route for a given call …   IT glossary of terms, acronyms and abbreviations

  • Routing control plane — In routing, the control plane is the part of the router architecture that is concerned with drawing the network map, or the information in a (possibly augmented) routing table that defines what to do with incoming packets. Control plane functions …   Wikipedia

  • Routing — This article is about routing in networks. For other uses, see Routing (disambiguation). Routing is the process of selecting paths in a network along which to send network traffic. Routing is performed for many kinds of networks, including the… …   Wikipedia

  • Routing loop problem — A routing loop is a common problem with various types of networks, particularly computer networks. They are formed when an error occurs in the operation of the routing algorithm, and as a result, in a group of nodes, the path to a particular… …   Wikipedia

  • Routing Information Protocol — Internet protocol suite Application layer BGP DHCP DNS FTP HTTP …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”