Metrication in the United States

Metrication in the United States
White slightly curved plastic with a green line drawing of a drop, the text "pyrithione zinc dandruff shampoo" in dark blue with "dry scalp care 2 in 1" in green, then a blue line. Underneath it is "shampoo plus dry scalp protection and conditioner" in smaller green type, and finally "23.7 FL OZ (700 mL)" in larger blue type
U.S. shampoo label, with round metric quantity taking secondary status next to non-integer U.S. customary quantity

Metrication is the process of introducing the International System of Units (SI or Système International), a metric system of measurement, to replace the historical or customary units of measurement of a country or region. The United States does not officially use or mandate a metric system of units, making it one of only three countries, along with Burma (Myanmar) and Liberia, that still use customary units.[1]

Contents

History

19th century

In the early 19th century, the U.S. Coast and Geodetic Survey (the government's surveying and map-making agency) used meter and kilogram standards brought from France. In 1866, Congress authorized the use of the metric system[2] and supplied each state with a set of standard metric weights and measures.

In 1875, the United States solidified its commitment to the development of the internationally recognized metric system by becoming one of the original seventeen signatory nations to the Metre Convention or the Treaty of the Meter. The signing of this international agreement concluded five years of meetings in which the metric system was reformulated, refining the accuracy of its standards. The Treaty of the Meter established the Bureau international des poids et mesures (BIPM, International Bureau of Weights and Measures) in Sèvres, France, to provide standards of measurement for worldwide use.

Under the Mendenhall Order in 1893, metric standards, developed through international cooperation under the auspices of BIPM, were adopted as the fundamental standards for length and mass in the United States. The U.S. customary units such as the foot and pound have been defined in relation to metric units ever since.

The 1895 Constitution of Utah, in Article X, Section 11, originally mandated that: "The Metric System shall be taught in the public schools of the State." This section was, however, later repealed.[3]

20th century

ANMC logo

The General Conference on Weights and Measures is the governing body for the modern metric system and comprises the signing nations of the Treaty of the Meter. The General Conference on Weights and Measures approved an updated version of the metric system in 1960 named Le Système international d'unités (International System of Units) and abbreviated SI.

On February 10, 1964, the National Bureau of Standards (former name of National Institute of Standards and Technology) issued a statement that it will use the metric system:

Henceforth it shall be the policy of the National Bureau of Standards to use the units of the International System (SI), as adopted by the 11th General Conference of Weights and Measures (October 1960), except when the use of these units would obviously impair communication or reduce the usefulness of a report.[4]

The metrication of the United Kingdom and the other Commonwealth nations, particularly Canada, increased the need for metrication in the United States.[citation needed]

U.S. metrication logo

In 1968, Congress authorized the U.S. Metric Study, a three-year study of systems of measurement in the U.S., with emphasis on the feasibility of metrication. The Department of Commerce conducted the study. A 45-member advisory panel consulted and took testimony from hundreds of consumers, business organizations, labor groups, manufacturers, and state and local officials. The final report of the study concluded that the U.S. would eventually join the rest of the world in the use of the metric system of measurement.[5] The study found that metric units were already implemented in many areas and that its use was increasing. The majority of study participants believed that conversion to the metric system was in the best interests of the U.S., particularly in view of the importance of foreign trade and the increasing influence of technology in the U.S.

This measuring cup, manufactured and sold in the U.S. circa 1980 at the height of the metrication effort, features graduations in both metric and U. S. customary units, with the metric graduations in front for right-handed users.

The U.S. Metric Study recommended that the United States implement a carefully planned transition to the principal use of the metric system over a decade. Congress passed the Metric Conversion Act of 1975 "to coordinate and plan the increasing use of the metric system in the United States". The Act did not stipulate the conversion happen over a decade. Voluntary conversion was initiated, and the U.S. Metric Board (USMB) was established for planning, coordination, and public education. The public education component led to public awareness of the metric system, but the public response included resistance, apathy, and sometimes ridicule.[6] In 1981, the USMB reported to Congress that it lacked the clear Congressional mandate necessary to bring about national conversion. Because of this ineffectiveness and an effort of the Reagan administration to reduce federal spending, the USMB was disbanded in autumn of 1982.

1980s Road Map mentioning an impending change to the metric system

The ending of the USMB increased doubts that metrication would really be implemented. Public and private sector metrication slowed even while competitiveness between nations and demands of global marketplaces increased.

The American National Metric Council (ANMC) was established in 1973 by the American National Standards Institute (ANSI) as a non-profit, tax-exempt organization for planning and coordinating metric activity in all sectors of the U.S. economy. The ANMC became a separately incorporated organization in 1976. The ANMC was intended to facilitate U.S. metrication by maintaining a voluntary and orderly process that minimizes costs and maximizes benefits, and to provide information, forums, individual assistance, and other services for its subscribers. The ANMC attempted to coordinate the metric planning of many industrial sectors, unlike the USMB, which only attempted to implement the policy set forth in the Metric Conversion Act of 1975. After the formation of the USMB, committees of the ANMC submitted conversion plans for the chemical sector and for the instruments sector. These sector conversion plans were later approved by the USMB. From 1975 through 1987, the ANMC held a series of well-attended annual conferences. Subsequently, a series of National Metric Conferences, jointly sponsored by the ANMC, the U.S. Metric Association (USMA), the U.S. Department of Commerce, and the National Institute of Standards and Technology (NIST), were held from 1989 through 1993.[7]

A 1980s-vintage dual miles per hour and kilometers per hour sign, (formerly) located in Florida.

Congress included new encouragement for U.S. industrial metrication in the Omnibus Trade and Competitiveness Act of 1988. This legislation amended the Metric Conversion Act of 1975 and designated the metric system as "the Preferred system of weights and measures for United States trade and commerce". The legislation states that the Federal Government has a responsibility to assist industry, especially small business, as it voluntarily converts to the metric system of measurement.

This legislation required most federal agencies to use the metric system in their procurement, grants, and other business-related activities by the end of 1992. While not mandating metric use in the private sector, the Federal Government has sought to serve as a catalyst in the metric conversion of the country's trade, industry, and commerce. Exceptions were made for the highway and construction industries. The Department of Transportation planned to require metric units by 2000, but this plan was canceled by the 1998 highway bill TEA21.[8] The U.S. military has generally high use of the metric system, partly because of the need to work with other nations' militaries.[9]

Some members of Congress attempted to ban use of the metric system on federal highways in 1992 and 1993.[10][11] These bills were not popular in the House of Representatives and failed before a vote.

Mars orbiter

The use of two different unit systems was the cause of the loss of the Mars Climate Orbiter in 1998. NASA specified metric units in the contract. NASA and other organizations applied metric units in their work, but one subcontractor, Lockheed Martin, provided thruster performance data to the team in pound force seconds instead of newton seconds. The spacecraft was intended to orbit Mars at about 150 kilometers (93 mi) altitude, but incorrect data probably caused it to descend instead to about 57 kilometers (35 mi), burning up in the Martian atmosphere.[12]

21st century

Metrication efforts

"Toward a Metric America" (button)

The effort toward national metrication is based on the premise that the U.S. industrial and commercial productivity, mathematics and science education, and the competitiveness of its products and services in world markets would be enhanced by the adoption of the metric system. Gerard Iannelli, director of the U.S. Metric Program, gave the opinion that Americans have so far not done so because of the effort it takes to "translate" from customary to metric units when both measurements are not shown. He also cited what he perceived to be ineffective attempts at public education and awareness.[13]

Current usage

Daily life

While most Americans have studied metric units at school, metric usage remains low in daily life. Speed limits are almost always in miles per hour and road signs usually give distances in miles or feet. The BTU remains the common measure of heating and cooling, and clothing is measured in inches. Some of the more common SI prefixes are widely known, and are sometimes used with non-metric units. For example, computer memory storage capacity is measured in kilobytes, megabytes, or gigabytes. Nuclear explosions are measured in kilotons and megatons of TNT. The letter K is commonly used to denote "thousand" (e.g., "She earns $80K"). However, contrary to the SI system, this is often written with an uppercase K instead of a lowercase k. This usage has largely replaced the Roman numeral M that was commonly used for "thousand" before the 1960s; in fact, the "M" has now come to denote "million" (e.g., "$32.5M budget").

Weather

Televised weather reports are given in Fahrenheit for dew point and air temperatures, miles per hour for windspeed, inches of mercury or millibars for atmospheric pressure, and other customary units. In some states on the Canadian border such as Washington (State), Michigan and New York, temperatures are described in both Fahrenheit and Celsius, as the broadcasts can be received in Vancouver, Canada and Ontario, Canada, which uses Celsius.

Consumer and retail

A 20 US fl oz (591 mL) bottle that displays both US and Metric units.

Some U.S. consumer products come in rounded metric sizes. This appears to be increasing because of the international nature of manufacturing, distribution, and sales. A few products display the metric quantity first or more prominently. Some items are produced and sold in rounded metric quantities (e.g., Crest Glide dental floss is available in 35-, 40-, and 50-meter packages).

Perhaps the most common metric item sold is the two-liter bottle. Some supermarket chains also make their store brand soft drinks available in 3-liter sizes. Soft drink containers of 1 and 0.5 liters are sometimes sold alongside 12 fl oz, 16 fl oz, 20 fl oz, and 24 fl oz (355, 473, 591 and 710 ml) sizes. Wine is also sold in standard bottles of 750 mL, as in the rest of the world. A fifth of liquor, once one-fifth of a U.S. gallon, or 757 mL, is now commonly 750 mL, though it is still referred to as "a fifth." It is becoming increasingly common to find bottled water in half-liter and one-liter sizes, though 16 fl oz, 20 fl oz, and 24 fl oz sizes remain popular. However, attempts to sell 3- or 4-liter jugs of milk, instead of gallons (3.785 L), have been largely unsuccessful, and such bottles are almost never seen in the US.

Household products such as shampoo, mouthwash, and dental floss have begun to be sold in metric sizes, and PowerBars and similar products have always been sold (but not marketed) by the gram. Consumer-size photographic film is commonly sold in a 35 mm standard (24x36 mm negative), although print sizes and large format films are defined in inches. Digital camera sensor sizes are measured in an archaic manner indicating inverse fractions of an inch, as a 1/1.6" sensor is larger than 1/2.5" sensor.

Sometimes metric and non-metric are combined on the same product. The standard method for sizing tires combines millimeters for tread width but uses inches for rim diameter.[14] Tire inflation for a typical passenger car is 30 psi (pounds per square inch), which is also given in its metric equivalent (207 kPa, or Kilopascals). In lighting, light bulbs use eighths of an inch for bulb diameter and full inches for fluorescent tube lengths, while the socket is always in millimeters (for example, the standard "medium Edison screw" is E26). On recently introduced Christmas lights, however, millimeters are often used with small globe-shaped bulbs (G30 and G40), and with miniature LED sets, where the standard T1¾ (732-inch tube) ones are sometimes called M5 (5 mm miniature; not to be confused with M5 thread).[citation needed]

A black-and-white table headed "Nutrition Facts" and listing quantities of various nutrients exclusively in metric units
Sample US Nutrition facts label

Nutritional food labels typically report serving sizes in both systems but only list metric values (g or mg) for the breakdown of individual nutrients. The use of Calories (large calorie) instead of kilojoules is a case where a deprecated unit[15] (itself invented as a metric version of the BTU) is used in place of the appropriate SI unit.[16]

FPLA issues

Since 1992, the federal Fair Packaging and Labeling Act (FPLA) has required consumer goods to be labeled in both customary and metric units. Some industries are engaged in efforts to amend this law to allow manufacturers to use only metric labeling.[17] Forty-eight U.S. states have adopted laws permitting labeling in metric units only with the two exceptions being New York and Alabama. New York is reportedly examining a shift to allow metric labeling[18] According to the European Community (now the EU) Directive 80/181/EEC issued on December 20, 1979, the European Union would have only allowed dual-unit labels to appear on products until December 31, 2009, but problems experienced during metrication efforts in the UK forced the EU to abandon this deadline.[19]

Pending the EU deadline, an amendment to the FPLA to allow metric-only labeling would allow manufacturers, both importers and exporters, to avoid the significant costs associated with having to produce two distinct types of package labels. A bill to permit metric-only labeling at the federal level was to have been introduced in 2005. Significant opposition from the Food Marketing Institute, representing U.S. grocers, has delayed the introduction of the bill. FMI expressed the fear that legislation to permit metric-only labels might also somehow mandate resizing of packaging to round metric sizes (a process already well underway), and this could require expensive remodeling or replacement of existing display cases. A compromise has been suggested whereby manufacturers in both the U.S. and the EU could opt for either metric-only or dual-unit labeling, but this idea has been viewed dimly by the EU negotiators.[citation needed]

Construction

Out of all industries, construction has adopted metric units least. Dimensional lumber comes in standard nominal inch cross-section sizes (e.g., a 2-by-4 is really 1½ by 3½ inches). Lengths are given in feet. Building codes are established at the local level and the U.S. has extensive building standards that are based on customary units. Because of Canada's proximity to the U.S., issues of common units still arise. This tendency in construction is similar to Japan, an otherwise metricated country where traditional construction still uses Japanese units predating metrication.

Aviation

Aircraft heights for air traffic control and related purposes are measured in feet in the U.S. In fact, most of the world use feet for aviation altitudes after the end of WW2 (in meters before 1945 in all European countries except GB), with the notable exceptions of China, North Korea, Russia and many other CIS (former Soviet) countries. For instance, an airliner on a long flight, even if neither its starting point nor destination are in the United States, might use a cruising altitude of an even 36,000 feet, rather than an even 10,000 meters.[citation needed]

Education

Most students are taught the metric system in elementary, middle, and high school. Instruction primarily centers on the concepts of powers of 10, the associated prefixes, and the conversion from one prefix form to another. Units of length, volume, and mass are typically introduced through comparison with ordinary objects. The metric system is not reinforced much outside the classroom due to lack of popular metric usage. Consequently, while students may understand some of the concepts underlying the metric system, they do not necessarily have an intuitive sense of the value of the units.

In science education, students predominantly use metric measures in experiments and equations, allowing those interested in the sciences to become more familiar with the metric system. Science classes are requisites for undergraduate degree in the U.S. which ensures most educated people have some familiarity with the metric system. Within higher education, the metric system is universal for classes in the sciences (see below). Some non-science textbooks in the U.S. use only the metric system without giving conversions in order to promote metrication.

Electricity and energy

There are no U.S. customary units for electric current, potential difference, or charge since these concepts were developed after the international adoption of metric in science. The metric units ampere, volt, ohm and coulomb are the only units used. The SI term hertz has replaced the term cycles per second as a unit of frequency.

Energy is often measured in watt-hours, BTUs, therms or calories rather than the SI joule. Residential and commercial electrical energy use is metered and billed in kilowatt hours, kW·h. Fuel prices are mostly given in customary units, such as dollars per gallon, barrel, thousand cubic feet, or ton (short or long). Heating, cooling, and combustion power are often measured in BTUs per hour. The rated power of engines, electric motors, and power plant steam turbines is frequently described in horsepower. Power plant output is generally expressed in megawatts.

Financial services

The United States was one of the first nations to adopt decimal currency. Until 2001, U.S. stocks were traded in fractions of dollars (½, ¼, ⅛) based on the old Spanish pieces of eight, but the Securities and Exchange Commission ordered stocks[clarification needed] to transition to dollars and cents to better integrate with global markets. Some commodity market prices are quoted in customary units (such as barrels of oil, troy ounces of gold, pounds of frozen pork bellies, etc.). The federal government reports international production figures in metric units (for instance, wheat in metric tons) but in bushels for domestic production figures.

Firearms

The U.S. continues to use the inch for caliber on many civilian and law enforcement firearms.[20] Except for the 9 mm, most widely recognizable calibers are in inches, such as the .45, .357, or .22. The arms industry is an international one, however, and many foreign gun manufacturers design, build, and sell firearms measured in inches (a good example is the .357 SIG cartridge, which is actually a 9 mm caliber). Also, inch measurements of caliber may refer to the diameter of the bullet and not that of the barrel, like the .308 Winchester, which fires the same projectile as the .30-06 Springfield and the .300 Savage. Often, the caliber is just a number close to the diameter of the bullet, like the .220 Swift, .223 Remington and .222 Remington Magnum, all of which actually have .224-inch-diameter (5.7 mm) bullets. The U.S. military, reflecting its need to ensure interoperability with its NATO allies, uses metric measurements for almost all weapons calibers, even when the caliber in question originated as or was derived from a different measurement (e.g. 7.62 mm rather than .308, or 5.56 mm instead of .223).

Gemstones

Gemstones and pearls are sold in Metric carat.

Manufacturing

Globalization of manufacturing has led to wide adoption of metric standards, although this is not yet universal. After a period where automobiles were assembled with both customary and metric fasteners in each vehicle, cars are now universally built with metric parts. Automobile engines, once named after their displacement in cubic inches, e.g. the 426 Hemi, are currently named after their rounded measurement in liters (e.g., the 6.1 L Hemi). Technical publications by industry publishers and American automakers often give engine displacements in both cubic inches and cubic centimeters (or liters).[21][22] For example, the specifications for the Dodge SRT-8 6.1 L Hemi state the displacement as 370 cubic inches (6,059 cc).[23]

The electronics and computer industries largely converted to metric standards as new technologies were introduced toward the end of the 20th century, also driven in part by a shift in manufacturing from the U.S. to countries in Asia with metric standards. Thus, while 5¼-inch floppy disks had a nominal package size of 5¼ inches (approximately 130 mm), the nominal design diameter of the replacement "3½ inch" disks was actually 90 mm. CDs and DVDs are 120 mm in diameter, but their size is rarely mentioned; Mini CDs are sometimes called 80 mm CDs. Computer fan sizes are exclusively referred to by metric units (120 mm or 80 mm case fans, for example), while hard disk drive and CD drive bay widths are customary measurements, typically 3½ inches and 5¼ inches, respectively. Additionally, screen sizes are measured in inches, such as a 24-inch widescreen LCD display.

Military

The U.S. military uses metric measurements extensively to ensure interoperability with allied forces, particularly NATO STANAGs, "standardization agreements". Ground forces measure distances in "klicks", slang for kilometers. Most military firearms are measured in metric units, beginning with the M-14 which was introduced in 1957,[20] although a few legacy exceptions exist, such as .50-caliber guns. Aircraft ordnance is normally measured in pounds. Heavy weapon caliber is measured in millimeters. Military vehicles are generally built to metric standards. An exception is the U.S. Navy, whose guns are measured in inches and whose undersea fleet measures distances in terms of "kiloyards" (equivalent to 914.4 m), depth as "feet", and velocity, in some cases, as "feet per second". The Navy and Air Force continue to measure distance in nautical miles and speed in knots; these units are now accepted for use with SI by the BIPM.[24]

Illegal drugs and controlled substances

Illegal drugs and controlled substances are often measured in metric quantities.[25] The federal law prohibiting them defines the penalties in metric masses.[26]

In everyday usage within its subculture, marijuana is sold using a combination of metric and American customary units. At small scales the basic unit is the gram (or fractions thereof), but for larger orders fractions of ounces and pounds are used generally starting at ⅛ ounce, which is often defined in turn as 3.5 grams and referred to simply as "an eighth."[27] The term "kilo" is used quite commonly by those in law enforcement to describe the amount of drugs (in kilograms) seized during a drug bust. A kilo of illegal drugs (in particular cocaine) is often referred to by the slang term "key".

Science and medicine

In science, metric usage is essentially universal, consistent with worldwide usage, although additional specialized units are often utilized for specific purposes in various disciplines (such as the light-year in astronomy). Medicine is generally metric, but where interaction with patients is required, usage is often mixed. Doctors often measure a patient's weight in pounds to compute a dosage of medicine administered in grams or milliliters. Heights are measured in inches but head circumferences in centimeters. Even in many cases for which metric units are otherwise used, U.S. practice often varies from the rest of the world. For example, U.S. diabetes patients measure their blood sugar levels in milligrams per deciliter, whereas most other countries use millimoles per liter. American blood glucose meters have the ability to switch between the two.

Earth sciences, such as hydrology and geology, continue to use customary units for field surveying. This due both to the legacy of many decades of data collection and to the need to work with the construction industry, which has not adopted the metric system.[citation needed] American irrigation engineers, for example, talk in acre-feet and cubic feet per second, whereas their Australian counterparts would refer to gigaliters and cubic meters per second.

In hospital settings, patient data is typically recorded using metric quantities, but all interaction with patients is done with reference to U.S. customary units (i.e., patient weights might be recorded in kilograms but discussed with patients in pounds).[citation needed]

Meteorologists are required to have substantial knowledge of the metric system, since most observing, analysis, synoptic weather charts, and computer forecast models are all done in metric.[citation needed] Because most weather forecasts are issued to the public in customary units, meteorologists must also know how to convert between the two systems.

Usage among veterinarians varies, but because of the heavy emphasis on public interaction, animal weights (e.g., for cats or dogs) are nearly always recorded and reported in pounds and ounces. Usage at veterinary teaching hospitals, by contrast, favors the SI units.

In early 2007, NASA announced that it will use metric units for all operations on the lunar surface when it returns to the Moon, projected for 2020.[28]

Sports

U.S. citizens are frequently exposed to metric units through coverage of international sporting events, particularly the Olympic Games.

Races in the U.S. are usually run in metric distances (e.g., the 100 meter dash and 5 km (5K) races), although the mile distance remains popular. The marathon is referred to as a 26-mile (42 km) race (the official marathon standard distance originally being in English units - 26 miles, 385 yards) rather than 42.195 km.

Measured distances as used in events such as shot put, high jump, and discus throw are, however, often in feet and inches, except at the national and international levels. The field and court sizes for most popular team sports (even soccer) were originally set in non-metric units. This is reflected in American football, in which the playing field is divided into yards, and many important statistics are measured in yards. Some sporting equipment, such as skis and poles, is sold in metric units. The lengths of automobile races in the U.S. are generally set in miles.

Bicycles, especially at the high end, are increasingly being sold and sized in metric[citation needed] (for example, a frame described as "21 inch" size in the past is now often labeled as a "53 cm" frame instead). Some bicycle wheels are labeled in metric as "700c" for a nominal 700 mm diameter road bike tire, but mountain bikes tend to use 26-inch wheels.[citation needed]

Common swimming pool dimensions are 25-yard, 25-meter, and 50-meter. High schools and the NCAA conduct 25-yard competitions. USA Swimming (USA-S) swims in both metric and non-metric pools.[citation needed]

Transportation

"Valencia Rd. Tucson. 500 m" on Interstate 19

Highway speed limits are posted in miles per hour and distances are largely displayed in miles, yards, or feet, although a few dual mile/km signs can be found, mostly left over from demonstration projects that are no longer supported.[29] One exception is Interstate 19 in Arizona, which is almost completely signed in metric, except for speed limit signs. Signage on this road is, however, being converted back to customary units as they are replaced. Another exception is the turnpike section of Delaware Route 1, which uses a kilometer-based system, in anticipation of the mid-1990s conversion in the U.S. to the metric system (which did not happen). Distances were originally signed in kilometers, but have since been replaced with standard milemarkers. The exit signs have remained metric.

The 2000 and 2003 editions of the Manual on Uniform Traffic Control Devices were published using both metric and American Customary Units. Metric signs, including speed signs in kilometers per hour, were displayed in the manual even though they were not normally used on the roads and there was no definite plan to go metric. For visual distinction, regulatory and advisory metric speed signs have black circles around the numbers followed by "km/h" and other regulatory metric signs have yellow plates reading "METRIC" in black on top of the main signs. Metric signs and metric measurements were removed for the 2009 edition and replaced with an appendix of metric conversion tables. Officially, this means that, although not widely used, metric road signs are allowed in the United States. The UK Metric Association considers this one way in which metrication is ahead of the United Kingdom, where metric road signs are usually illegal.[30]

Distance sign near Bowling Green, Ohio

Newer signs on state highways on the island of Kaua‘i in Hawai‘i also include distances in both miles and kilometers.[31] Mile markers along highways on the Island of Hawai'i will indicate both units whenever the whole kilometer corresponds with the whole mile (ex.: 5 mi/8 km). In Houston, Texas many speed limits have km/h signs underneath the MPH signs. These are located near both airports and in the Texas Medical Center. The U.S. territory of Puerto Rico generally uses American-style (MUTCD) signs with metric measurement on highways, displaying kilometer posts and distances in km, yet speed limit signs are in miles per hour. The Maine Turnpike has metric measurements on its highway signs in addition to Customary measurements, partially to assist the large numbers of Canadian tourists who visit Maine's beaches.

Gasoline and diesel fuel are sold by the U.S. gallon, and fuel economy is rated in miles per gallon (MPG). Stations in Point Roberts, Washington, a short, discontiguous peninsula that is accessible to the rest of the state of Washington only by crossing into Canada, sells its gasoline from pumps calibrated to dispense in liters. Gasoline is dispensed in liters in Puerto Rico. Automobile crankcase oil is sold by the quart, antifreeze by the gallon, brake fluid by the ounce (fluid), and A/C refrigerant by the ounce (mass). Windshield wiper replacement blades are measured in inches.

Speed limit signs in both mph and km/h in Blaine, Washington

Domestic airline flights are assigned altitudes in feet and measure speed in knots. Nautical charts show depth in fathoms and use the nautical mile for distance. (One minute of arc of latitude at the radius of the earth at sea level was the standard for one nautical mile until ca. 1929. The nautical mile is now defined as exactly 1,852 meters.) Railroads use the standard gauge of 4 feet 8½ inches, as does most of Europe (where it is expressed instead as 1,435 mm). U.S. Federal Motor Vehicle Safety Standard 101, which governs vehicle controls and displays, permit speedometers to display miles per hour, kilometers per hour, or both. Odometers are permitted to record miles or kilometers, but must be clearly labeled as to which unit they record. In practice, virtually all U.S.-market vehicles have mile odometers and dual labeled speedometers with mile -per-hour as the primary calibration. Some vehicles with electronic speed and distance readouts can be switched between U.S. and metric units.

Hybrid units

Some measurements are reported in units derived from both customary and metric units. For example:

  • Power per unit length of a nuclear reactor fuel rod: kilowatts per foot
  • Heat rate from a power plant: BTU/kWh[32]
  • Federal automobile exhaust emission standards: grams per mile
  • Caffeine in beverages: milligrams per ounce
  • Running load limits specified in Boeing airplane flight manuals: kilograms per inch.
  • In the Canadian printing industry where ink is sold by the kilogram and paper by the square inch, ink "mileage" is measured in square inches per kilogram or "squinks"
  • Energy Efficiency Ratio (EER), which is the ratio of an air conditioner's cooling capacity in BTU and its input power in watt-hours. It is used instead of the coefficient of performance, which is a dimensionless ratio that is the same in any system of units as long as they are consistent.

Any measurement that combines customary units with electrical units is necessarily hybrid, since there are no U.S. customary electrical units. An example can be found in Table 8, chapter 9 of the National Electrical Code Handbook (8th ed.) where resistance of conductors per unit length is given in ohms per thousand feet.

Other units are based on customary units but use metric prefixes. For example, distance to target for a U.S. submarine is expressed in kiloyards. Telephone network lines are measured in kilofeet (KF).

Cultural impact

R. How many feet and how many inches are in ten meters?
G. How many feet and how many inches are in ten meters? What is it, 330 feet?
R. No, in ten meters.
G. Yeah.
R. Ten meters is like, it's like 11 or something, right?

George Stephanopolous interviewing Rick Sanchez, October 8, 2010[33]

The continuing use of U.S. customary units has been a cause for speculation in fiction set in the future. Many authors of such works of fiction have assumed that the United States and the human race in general will use metric units in the future; however, some have assumed the continued use of U.S. customary units or have neglected to take metrication into account. Additionally, writers will sometimes use customary units simply because American readers and watchers will understand the measurements; other times, they are simply used by accident. The 1966 show Star Trek, for instance, initially used U.S. customary units despite multiple Earth national origins and a setting in the 23rd century. Later, starting with "The Changeling", metric measures were used, albeit inconsistently. Later sequels of the show, such as Star Trek: The Next Generation, used the metric system exclusively.

Both the metric system and attitudes in the U.S. toward the metric system are a target of humorous jabs in shows such as The Simpsons,[34] Futurama[35] and The Big Bang Theory.[36] A Saturday Night Live sketch titled "Decabet," released at the height of the metrication movement, lampooned the different metric measurements by introducing a new alphabet consisting of only ten letters. Popular Science's September 2003 edition listed NIST's "Metric System Advocate" on its list of "Worst Jobs in Science".[37]

See also

References

  1. ^ "Appendix G - Weights and Measures". The World Factbook. Washington: Central Intelligence Agency. January 17, 2007. https://www.cia.gov/library/publications/the-world-factbook/appendix/appendix-g.html. Retrieved February 4, 2007. 
  2. ^ 29th Congress of the United States, Session 1 (May 13, 1866). "H.R. 596, An Act to authorize the use of the metric system of weights and measures". http://lamar.colostate.edu/~hillger/laws/metric-act-bill.html. 
  3. ^ "Constitution of the State of Utah". Archives.utah.gov. 2002-05-29. http://archives.utah.gov/research/exhibits/Statehood/1896text.htm. Retrieved 2011-08-02. 
  4. ^ "How Many? A Dictionary of Units of Measurement", Russ Rowlett and the University of North Carolina at Chapel Hill, August 8, 2000
  5. ^ "A Metric America: A Decision Whose Time Has Come". June 1992. http://ts.nist.gov/WeightsAndMeasures/Metric/4858.cfm. Retrieved 2008-12-01. 
  6. ^ Martha Brockenbrough. "Whatever Happened to the Metric System?". Whatever Happened to the Metric System?. http://encarta.msn.com/column_metricsystem_marthahome/Whatever_Happened_to_the_Metric_System.html. Retrieved January 15, 2008. [dead link]
  7. ^ U.S. Metric Association (USMA), Inc. "American National Metric Council". http://lamar.colostate.edu/~hillger/laws/anmc.html. Retrieved June 14, 2008. 
  8. ^ "DYKT: Did You Know That". Lamar.colostate.edu. 2008-06-05. http://lamar.colostate.edu/~hillger/dykt.htm#highway. Retrieved 2011-08-02. 
  9. ^ Guide for Identification and Development of Metric Standards, December 2003, Office of the Under Secretary of Defense Acquisition, Technology & Logistics, http://ts.nist.gov/WeightsAndMeasures/Metric/upload/sd10final.pdf
  10. ^ http://thomas.loc.gov/cgi-bin/query/z?r103:E04NO3-308:
  11. ^ http://thomas.loc.gov/cgi-bin/query/z?r102:E15SE2-437:
  12. ^ NASA's metric confusion caused Mars orbiter loss CNN.com
  13. ^ Erin Condon (September 24, 2001). "Still a Matter of Inches - metric system usage in the US". CNET Networks, Inc.. http://findarticles.com/p/articles/mi_m1571/is_36_17/ai_78790466. 
  14. ^ "Tire Tech Information—A Guide to Tire Sizes". Tirerack.com. http://www.tirerack.com/tires/tiretech/techpage.jsp?techid=46. Retrieved 2011-08-02. 
  15. ^ Standard for Use of the International System of Units (SI) (IEEE/ASTM SI 10-1997) (1997). New York and West Conshohochen, PA: Institute of Electrical and Electronics Engineers and American Society for Testing and Materials. p. 11
  16. ^ How to Understand and Use the Nutrition Facts Label. U.S. Food and Drug Administration. June 18, 2009.
  17. ^ [http://ts.nist.gov/WeightsAndMeasures/Metric/forumdir.cfm[dead link]
  18. ^ Forum Report: Permissible Metric-Only Labeling[dead link]
  19. ^ Office for Official Publications of the European Communities (2000). COUNCIL DIRECTIVE of December 20, 1979, on the approximation of the laws of the Member States relating to units of measurement and on the repeal of Directive 71/354/EEC. Available at NIST Web site. p. 4.
  20. ^ a b "M14". Nazarian's Gun Recognition Guide. http://www.nazarian.no/wep.asp?id=287. Retrieved September 22, 2006. 
  21. ^ "Maserati MC12 - Engine, Chassis, Dimensions, Price, Warranty & Performance - Road Test Review". Motor Trend. 2010-12-13. http://www.motortrend.com/roadtests/coupe/112_0506_maserati_mc12/specs_price.html. Retrieved 2011-08-02. 
  22. ^ http://www.detroitdiesel.com/pdf/Engines/2006_S60_specs.pdf
  23. ^ "The Official Chrysler HEMI engine Web site". HEMI. http://www.hemi.com/hemi.html. Retrieved 2011-08-02. 
  24. ^ "Non-SI units accepted for use with the SI, and units based on fundamental constants". Bureau International des Poids et Mesures. http://www.bipm.org/en/si/si_brochure/chapter4/table8.html. 
  25. ^ P. J. O'RourkeUS humorist & political commentator (1947 - ). "Quote Details: P. J. O'Rourke: Drugs have taught an...". The Quotations Page. http://www.quotationspage.com/quote/33234.html. Retrieved 2011-08-02. 
  26. ^ DEA, Title 21, Section 841[dead link]
  27. ^ Stephen J. Sifaneck, Geoffrey L. Ream, Bruce D. Johnson, and Eloise Dunlap (September 2007). "Retail marijuana purchases in designer and commercial markets in New York City: Sales units, weights, and prices per gram". Drug and Alcohol Dependence 90 (Supplement 1): S40–S51. doi:10.1016/j.drugalcdep.2006.09.013. PMC 2077843. PMID 17055670. http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6T63-4M57H4X-1&_user=10&_rdoc=1&_fmt=&_orig=search&_sort=d&view=c&_acct=C000050221&_version=1&_urlVersion=0&_userid=10&md5=28deb224717608e34721b7d3ee0b3c02. 
  28. ^ "NASA - Metric Moon". Science.nasa.gov. 2011-04-06. http://science.nasa.gov/science-news/science-at-nasa/2007/08jan_metricmoon/. Retrieved 2011-08-02. 
  29. ^ "50th Anniversary of the Interstate Highway System -Frequently Asked Questions". Fhwa.dot.gov. http://www.fhwa.dot.gov/interstate/faq.htm#question17. Retrieved 2011-08-02. 
  30. ^ UK Metric Association: Fiction: The USA has not gone metric; Fact: It's going metric[dead link]
  31. ^ Oscar Voss. "from". Hawaiihighways.com. http://www.hawaiihighways.com/photos-intro.htm. Retrieved 2011-08-02. 
  32. ^ Hasler, David. "Coal-Fired Power Plant Heat Rate Reductions". U.S. Environmental Protection Agency. pp. 1–1. http://www.epa.gov/airmarkt/resource/docs/coalfired.pdf. 
  33. ^ Scott Whitlock (2010-10-08). "Fired Rick Sanchez Plays Identity Politics With George Stephanopoulos, Skips Minorities on ABC". NewsBusters. http://newsbusters.org/blogs/scott-whitlock/2010/10/08/fired-rick-sanchez-plays-identity-politics-george-stephanopoulos-ski. 
  34. ^ In The Simpsons, jokes about the situation are made in episodes "A Star Is Burns," "Homer the Great," "The Seven-Beer Snitch," and others. For instance, Abraham "Grampa" Simpson once remarked: "The metric system is the tool of the devil! My car gets forty rods to the hogshead and that's the way I likes it."
  35. ^ An example is in "The Series Has Landed," when a farmer on the moon states that at night, the temperature drops down to -173. Fry asks, "Is that Fahrenheit or Celsius?" to which the farmer replies, "First one, then the other." Another is in "I, Roommate," when Calculon attempts to put a ring on Monique's finger; when it fits, she replies, "It fits! But then, you must know that I'm..." "Metric? I've always known, but for you, my darling, I'm willing to convert."
  36. ^ Season 4 Episode 07 "Apology Insufficiency"; Sheldon: "Ethyl alcohol. 40 milliliters." Penny: "I’m sorry, honey, I don’t know milliliters." Sheldon: "Ah. I blame President James “Jimmy” Carter. He started America on a path to the metric system but then just gave up. He wonders why he was a one-term president."
  37. ^ Speed, William. "The Worst Jobs in Science 2003 | Popular Science". Popsci.com. http://www.popsci.com/scitech/article/2003-09/worst-jobs-science-2003. Retrieved 2011-08-02. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Metrication in the United Kingdom — The metric and imperial systems of measurement are used side by side in the United Kingdom: Eurostar s design speed is cited both as 300 km/h [1] and as 186 mph .[2] Metrication in the United Kingdom is the pr …   Wikipedia

  • Plan for Establishing Uniformity in the Coinage, Weights, and Measures of the United States — The Plan for Establishing Uniformity in the Coinage, Weights, and Measures of the United States was a report submitted to the U.S. House of Representatives on July 13, 1790 by Secretary of State Thomas Jefferson.At the First United States… …   Wikipedia

  • United States customary units — A table of weights from the secretaries of states, showing the number of pounds that their laws recognize as a bushel of different commodities. c. 1854 United States customary units are a system of measurements commonly used in the United… …   Wikipedia

  • United States Metric Board — The United States Metric Board was a United States government agency set up to encourage metrication. It existed from 1975 to 1982, ending when President Ronald Reagan abolished it, largely on the recommendation of Frank Mankiewicz and Lyn… …   Wikipedia

  • Metrication in Canada — The metrication logo used in Canada during the 1970s and 1980s. Canada has converted to the metric system for many purposes but there is still significant use of non metric units and standards in many sectors of the Canadian economy. This is… …   Wikipedia

  • Metrication controversy — The introduction of the metric system has faced some opposition in a number of countries over the past two centuries. Based on a previous U.S. Metric Association and recent CIA survey it is commonly cited that only the United States of America,… …   Wikipedia

  • Metrication opposition — The spread of metrication around the world in the last two centuries has been met with both support and opposition. All countries except Burma (Myanmar), Liberia, and the United States of America have officially adopted the metric system,[1]… …   Wikipedia

  • Metrication in Australia — took place between 1970 and 1988. Before then, Australia mostly used the imperial system for measurement, which the Australian colonies had inherited from the United Kingdom. Between 1970 and 1988, imperial units were withdrawn from general legal …   Wikipedia

  • The Metric Marvels — The Metric Marvels, from left to right: Meter Man, Liter Leader, Wonder Gram and Super Celsius The Metric Marvels is a series of seven animated educational shorts featuring songs about meters, liters, Celsius, and grams, designed to teach… …   Wikipedia

  • Metrication — A speedometer used in American and British cars, showing the speed of the vehicle in miles per hour (outer, in white) and kilometres per hour (inner, in red) for Canadian[1] vehicles the locations are reversed …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”