Unity (ISS module)

Unity (ISS module)
ISS Unity connecting module (NASA)

The Unity connecting module was the first U.S.-built component of the International Space Station. It is cylindrical in shape, with six berthing locations (forward, aft, port, starboard, zenith, and nadir) facilitating connections to other modules. Unity measures 4.57 metres (15.0 ft) in diameter, is 5.47 metres (17.9 ft) long, and was built for NASA by The Boeing Company in a manufacturing facility at the Marshall Space Flight Center in Huntsville, Alabama. Sometimes referred to as Node 1, Unity was the first of the three connecting modules; the other two are Harmony and Tranquility.

Contents

Launch and initial berthing

Unity was carried into orbit as the primary cargo of the Space Shuttle Endeavour on STS-88, the first Space Shuttle mission dedicated to assembly of the station. On December 6, 1998, the STS-88 crew mated the aft berthing port of Unity with the forward hatch of the already orbiting Zarya module. (Zarya was a mixed Russian-US funded and Russian-built component launched earlier aboard a Russian Proton rocket from Baikonur, Kazakhstan.) This was the first connection made between two station modules.

Connections to other station components

Unity has 2 axial, and 4 radial Common Berthing Mechanism (CBM) ports. In addition to connecting to the Zarya module, Unity currently connects to the U.S. Destiny Laboratory Module (added on STS-98), the Z1 truss (an early exterior framework for the station added on STS-92), the PMA-3 (also added on STS-92), and the Quest Joint Airlock (added on STS-104). In addition, the Leonardo and Raffaello Multi-Purpose Logistics Modules have each been berthed to Unity on multiple missions. During STS-120 the Harmony connecting module was temporarily berthed to the port-side hatch of Unity. Tranquility, with its multi-windowed cupola, was attached to Unity's port side during the STS-130 mission. However, recently NASA decided to leave the MPLM Leonardo permanently attached to the ISS, which as of STS-133 is located at the nadir side of Node 1.

Details

Interior of the Unity module

Essential space station resources such as fluids, environmental control and life support systems, electrical and data systems are routed through Unity to supply work and living areas of the station. More than 50,000 mechanical items, 216 lines to carry fluids and gases, and 121 internal and external electrical cables using six miles of wire were installed in the Unity node. Unity is made of aluminum.

Prior to its launch aboard Endeavour, conical Pressurized Mating Adapters (PMAs) were attached to the aft and forward berthing mechanisms of Unity. Unity and the two mating adapters together weighed about 25,600 pounds (11,600 kg). The adapters allow the docking systems used by the Space Shuttle and by Russian modules to attach to the node's hatches and berthing mechanisms. PMA-1 now permanently attaches Unity to Zarya, while PMA-2 provides a Shuttle docking port. Attached to the exterior of PMA-1 are computers, or multiplexer-demultiplexers (MDMs), which provided early command and control of Unity. Unity also is outfitted with an early communications system that allows data, voice and low data rate video with Mission Control, Houston, to supplement Russian communications systems during the early station assembly activities. PMA-3 was attached to Unity's nadir berthing mechanism by the crew of STS-92.

Other nodes

The two remaining station connecting modules, or nodes, were built in Italy by Alenia Aerospazio, as part of an agreement between NASA and the European Space Agency (ESA). Harmony (formerly known as Node 2) and Tranquility (formerly known as Node 3) are slightly longer than Unity, measuring almost 6.4 meters (21 ft) long. In addition to their six berthing ports, each can hold eight International Standard Payload Racks (ISPRs). Unity, in comparison, holds just four ISPRs. ESA built Nodes 2 and 3 as partial payment for the launch aboard the Shuttle of the Columbus laboratory module, and other ESA equipment.

Specifications

  • Length: 5.49 m (18.0 ft)
  • Diameter: 4.57 m (15.0 ft)
  • Mass: 11,612 kg (25,600 lb)

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Unity (ISS) — Unity Modul, aufgenommen von STS 88 (NASA) Navigation Internationale Raumstation Liste der ISS Module …   Deutsch Wikipedia

  • Unity (ISS) — Unity Unity Unity (aussi appelé Node 1) est le second module de la station spatiale internationale, et le premier construit par les États Unis. C est un cylindre de 11 612 kg, 5,47 m de long et de 4,57 m de diamètre construit par Boeing …   Wikipédia en Français

  • Tranquility (ISS module) — Tranquility photographed just before being installed to Unity node …   Wikipedia

  • Rassvet (ISS module) — Rassvet as seen from the Cupola module during STS 132 …   Wikipedia

  • Poisk (ISS module) — Poisk docking module at the Space Station. Poisk (Russian: Поиск; lit. Search), also known as the Mini Research Module 2 (MRM 2), Малый исследовательский модуль 2, or МИМ 2, is a docking module of the International Space Station. Its original… …   Wikipedia

  • Pirs (ISS module) — View of SO1 Pirs Docking compartment The Pirs docking compartment is a Russian module of the International Space Station (ISS). Pirs (Russian: Пирс, meaning pier ) also called Stikovochny Otsek 1 or SO 1 (Russian: Стыковочный отсек, docking… …   Wikipedia

  • Liste der ISS-Module — Dies ist die Liste der Module der Internationalen Raumstation (ISS). Sie enthält alle bereits installierten und die aktuell geplanten wesentlichen Bestandteile der ISS, geordnet nach dem Zeitpunkt ihres Starts. Neben einer kurzen Beschreibung des …   Deutsch Wikipedia

  • Destiny (ISS module) — The Destiny Laboratory Module (NASA) being installed on the International Space Station. See also: Scientific research on the ISS The Destiny module is the primary operating facility for U.S. research payloads aboard the International Space… …   Wikipedia

  • Harmony (ISS module) — Node 2 shown connected to Columbus, JEM, PMA 2 and Discovery. The nadir and zenith locations are open. Harmony, also known as Node 2, is the utility hub of the International Space Station. The hub contains four racks that provide electrical power …   Wikipedia

  • Zvezda (ISS module) — For other uses, see Zvezda (disambiguation). ISS Zvezda The Zvezda service module of the ISS with Zarya to the right and a docked Soyuz spacecraft to the left …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”