Mazda K engine

Mazda K engine
Mazda K engine
KZ-LE
Manufacturer Mazda
Production 1992–2002
Successor Mazda AJ engine

The Mazda K-series automobile engine is a short stroke, 60° V6 24-valve with belt-driven DOHC and aluminum-alloy cylinder heads and block. Their displacements range from a tiny 1.8 L to 2.5 L. They all use a 27-degree DOHC valvetrain with directly actuated hydraulic (HLA) bucket lifters. The K-series also feature a highly-rigid, all-aluminum split-crankcase engine block design with 4 & 6 bolts for each main journal, internally balanced forged crankshaft with long, lightweight forged carbon steel connecting rods. They were designed to be as compact as possible for short-hood front-wheel drive applications.

A unique innovation of the K-series is the introduction of Variable Resonance Induction System (VRIS). Based on the Helmholtz resonance principle, the intake manifold is equipped with 3 chambers tuned to a specific resonant frequency. The computer dynamically switches between each resonant chamber to achieve the appropriate resonant frequency for the engine's RPM. This effect optimizes volumetric efficiency over a given RPM range to provide maximum torque over the entire RPM range. VRIS is used on the K8, KF, and KL but nearly all modern V6 engines are now using this technology.

The K-series all have a 7,000 RPM redline with 7500 RPM limiter, which given the engine design is conservative. The KJ-ZEM Miller cycle engine had a 6,000 rpm redline, but was only available with an automatic transmission.

The Mazda K-series was conceptualized and co-developed with Suzuki in which Mazda handled the bulk of the engineering with valuable input from Porsche[citation needed] . The early 2.0 L Suzuki H20A and Mazda KF share the same bore, stroke and displacement but the similarities end there. The Suzuki uses a timing chain, configured for RWD and as a result is physically larger. Suzuki focused on building ever-larger torque-producing engines for their SUV lineup, while Mazda focused on high-technology and power output. The Suzuki and Mazda engines do not share any components at all.

Contents

K8

The 1.8 L (1845 cc) K8 is among the smallest production V6 engines ever; and also the first K-series engine to be used in a Mazda car (in the Mazda MX-3). It was a DOHC 4-valve design with VRIS and a 75 mm (3.0 in) bore and 69.6 mm stroke. It produced 130 hp (97 kW) in US trim (sometimes referred to as "K8-DE"), and 135 hp (101 kW) in Japanese trim (the "K8-ZE") on introduction in 1991 and 144 hp (108 kW) and 115 ft·lbf (157 Nm) at its best.

Applications:

KF

  • 2.0 L KF - 1995 cc (78x69.6 mm) - The 2.0 L KF engine was available in various states of tune. The KF-DE produced 140 hp (100 kW) and 132 ft·lbf (179 N·m) and later on 144 hp (107 kW) and 132 ft·lbf (179 N·m). The JDM version KF-ZE engine produced 160 hp (120 kW) and 132 ft·lbf (179 N·m). The Lantis Type R variant produced 170 hp (130 kW) and 140 ft·lbf (190 N·m).

Applications:

  • 1991-1997 Mazda Mx-6
  • 1992-1993 Eunos 500, 160 hp 180 N·m (133 lb·ft)
  • 1993-2002 Eunos 800
  • 1992-1998 Efini MS-8
  • 1993-1999 Xedos 6
  • 1993-2002 Xedos 9
  • 1993-1996 Mazda Lantis
  • 1994-1996 Mazda 323f V6 GLX
  • 1996-1998 Mazda 323f ZXi

KJ-ZEM

The 2.3 L (80.30 mm bore 74.20 mm stroke, 2255 cc) KJ-ZEM is one of Mazda's most technologically advanced engines. It employs the "Miller cycle" which uses a supercharger to increase compression efficiency by decreasing the compression losses (i.e., flywheel energy used to compress the intake charge in the cylinder); and thereby increasing the net power output of the four-stroke cycle. It was used in the T-platform cars. The supercharger used is the twin-screw type with electronic boost control. Power output was 217 hp (162 kW) and 210 ft·lbf (280 N·m). The KJ-ZEM was on the Ward's 10 Best Engines list for 1995 through 1998.

Applications:

KL

The 2.5 L (2497 cc) KL family uses an 84.5 mm bore and 74.2 mm stroke. It includes the Japan-only KL-ZE, which produced 199 hp (149 kW) and 165 ft·lbf (224 Nm). Another variant, the KL-DE (also known as the KL-03 outside the USA, and fitted to 2.5 litre Ford Probes) was the worldwide version, with 164-174 hp in various applications. In 1998 a revised version of the KL known as the KL-G4 was used in the 626. It featured solid lifters, a cast crankshaft to reduce rotating mass and a reworked intake system. The distributor was replaced with a Ford EDIS coil-pack ignition.

Mazda introduced a key technology with these engines, known as the Variable Resonance Induction System (VRIS). A series of two butterfly valves coupled with electronically controlled actuators varied the volume and length of a resonant chamber attached to the intake manifold, producing 4 resonant frequencies. The valves actuate at particular engine frequencies (i.e. RPMs) to produce optimal torque/horsepower output at any given engine speed.

Applications:

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Mazda Wankel engine — Mazda Wankel rotary engines Manufacturer Mazda Production 1963 – 2012 Turbocharger 1986 up …   Wikipedia

  • Mazda Diesel engine — Mazda has a long history of building its own Diesel engines, with the exception of a few units that were built under license. Contents 1 Straight 4 1.1 Perkins 1.2 RF 1.3 RF 1998 …   Wikipedia

  • Mazda B engine — B Series Manufacturer Mazda The Mazda B series engine is a small sized, iron block, inline four cylinder with belt driven SOHC and DOHC valvetrain ranging in displacement from 1.1L to 1.8L. It was used from front wheel drive economy applications… …   Wikipedia

  • Mazda F engine — The F engine family from Mazda is a mid sized straight 4 piston engine with iron block, alloy head and belt driven OHC. Introduced in 1983 as the 1.6L F6, this engine was found in the Mazda B Series truck and Mazda G platform models such as Mazda …   Wikipedia

  • Mazda L engine — The Mazda L series is a mid sized inline 4 cylinder gasoline engine ranging in displacements from 1.8L to 2.5L. Introduced in 2001, they are the evolution of the cast iron block F engine. This engine is designed by Mazda and is also used by Ford… …   Wikipedia

  • Mazda C engine — The C family was Mazda s first large piston engine design. Contents 1 PC 2 TC 3 UC 4 UB 5 NA …   Wikipedia

  • Mazda Z engine — This article is about the Z automobile engine family. For .z5 files, see Z machine. The Mazda Z series is a smaller inline 4 cylinder gasoline engine ranging in displacements from 1.3L to 1.6L. They are the evolution of the cast iron block B… …   Wikipedia

  • Mazda MZR engine — MZR redirects here. For the airport with IATA code MZR, see Mazar i Sharif Airport. Turbocharged MZR engine in a 2006 Mazdaspeed6 MZR is the brand name of a generation of Straight 4 engines engineered and built by the Mazda Motor Corporation… …   Wikipedia

  • Mazda OHV engine — After an early flirtation with V twin engines, Mazda s small cars of the 1960s were powered by OHV straight 4 engines. This family lasted from 1961 until the mid 1970s. Today, Mazda s keicars use Suzuki engines. Contents 1 DA 2 RA 3 SA …   Wikipedia

  • Mazda E engine — The E family was an evolution of Mazda s xC design. It was released in 1980 with the introduction of the first front wheel drive Mazda Familias and Ford Lasers. Some later variants of the E5 powered Mazda Familia and Ford Laser in Japan… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”