Point (typography)

Point (typography)

Contents

In typography, a point is the smallest unit of measure, being a subdivision of the larger pica. It is commonly abbreviated as pt. The point has long been the usual unit for measuring font size and leading and other minute items on a printed page. The original printer's point, from the era of foundry metal typesetting and letter press printing, varied between 0.18 and 0.4 mm depending on various definitions of the foot. By the end of the 19th Century, it had settled to around 0.35 to 0.38 mm, depending on one’s geographical location.

In the late 1980s to the 1990s, the traditional point was supplanted by the desktop publishing point (also called the PostScript point), which was defined as 72 points to the inch (1 point = 172 inches = 25.472 mm = 0.3527 mm). In either system, there are 12 points to the pica. In metal type, the point size of the font described the size (height) of the metal body on which the typeface's characters were cast. In digital type, the body is now an imaginary design space, but is used as the basis from which the type is scaled (see em).

A measurement in picas is usually represented by placing a lower case p after the number, such as "10p" meaning "10 picas." Points are represented by placing the number of points after the p, such as 0p5 for "5 points," 6p2 for "6 picas and 2 points," or 1p1 for "13 points" which is converted to a mixed fraction of 1 pica and 1 point. (An alternate nomenclature is described in the pica article.)

French printer’s points

See French units of measurement for the definitions of the units used in this section.

A French law of 1799 defined the meter to be exactly 443.296 French lines—or 3 French feet, 0 French inches and 11.296 French lines, superseding extant definitions which exchanged the dependent and independent parameters. Since the meter is now the standard unit by statute law, this change to a derived unit implicitly defines the modern day Pied du Roi— literally: a French Royal foot— as exactly 9,00027,706 meters (about 0.325 m). Like the English and Roman foot, the French foot also used twelve subdivisions—twelve French-inches.

This value is used in the conversions below; also note 12 × 12=122=144—a dozen-dozen, and 12 (French inches) × 144=1728 used below or 123.

Truchet

The modern typographic point was invented in France by the clergyman Sébastien Truchet (1657–1729). The size he chose was such that 1728 of these made one Pied du Roi— using the 1799 definition, 15,62583,124 mm (or about 0.188 mm). To Truchent, a point was defined the other way, there were a dozen-dozen points per French inch—or 1728 or 123 points to a French-Foot.

Fournier

Pierre Simon Fournier (1712–1768) used a typographic point of about 11864 French Royal inches ≈ 0.345 mm. A close resemblance compared to the modern 72 points to the inch of the American personal computer industry (As referenced above, 1 point = 172 inches = 25.472 mm = 0.3527 mm) Fournier’s point did not achieve lasting popularity, despite being revived by the Monotype Corporation Ltd. in 1927. Nowadays, Belgium remains one of the few countries to employ Fournier's point. According to the Second Edition of Simon's 1963 Introduction to Typography, type styles such as, Fournier, Plantin and Imprint "are more successful in their smaller sizes."

Didot

François-Ambroise Didot (1730–1801) returned to Truchet’s idea, but chose a size twice as large. Thus 864 of his points made one Pied du Roi—that is, 15,62541,559 mm ≈ 0.376 mm.

This value—somewhat odd due to the divisor, which has the prime factorization 3 × 7 × 1979—was not very flexible for use by typesetters and printers. Though the general size of the Didot point continued to be preferred to that of Truchet, several other printers each chose his or her own value for the point. These are compared below:

  • 0.376065 mm (0.0249% larger than Didot's point)—the traditional value in European printers' offices
  • 0.376000 mm (0.0076% larger)—used by Hermann Berthold (1831–1904) and many others
  • 0.375940 mm (0.0084% smaller)—Jan Tschichold (1902–1974), who used 266 points in 100 mm
  • 0.375000 mm (0.2584% smaller)—proposed in 1975, but hardly adopted

The French National Print Office adopted a point of 0.4 mm exactly, and continues to use this measurement today.

The Didot point has been replaced by the DTP point in France and throughout the world.

Traditional American point system

By the (Kasson) Metric Act of 1866 (Public Law 39-183), the US (survey) foot is 12003937 m. This is 0.0002% more than 304.8 mm, which is the length of the 1959 foot, used below. A typographic foot contains 72 picas or 864 points.

  • Nelson C. Hawks, in 1879, used a printer’s foot of a statute foot decreased by 0.375%. Therefore, the traditional ratio 72007227 (which reduces to 800803) places Hawks’ point at 0.013 837 inch, or about 0.35146 mm.
  • A second definition was proposed whereby there were exactly 996 printer’s points (= 83 picas) in 350 mm, which made the printer’s point about 0.013 848 867 inch ≈ 0.351405622 mm.
  • Finally, Lawrence Johnson stated in a third definition of printer’s foot that it should be 249250 (99.6%) English foot. This means that the Johnson’s typographical point was 0.01383 inch, and was then converted by the 1959 value to 0.35136 mm.

In 1886, the Fifteenth Meeting of the Type Founders Association of the United States approved the so-called Johnson pica be adopted as the official standard. This makes the traditional American printer’s foot measure 11.952 inches (303.6 mm), or 303.5808 mm exactly, giving a point size of approximately 172.27 of an inch, or 0.3515 mm.

This is the size of the point in the TeX computer typesetting system by Donald Knuth, which predates PostScript slightly. Thus the latter unit is sometimes called the TeX point.

Like the French Didot point, the traditional American printer’s point was replaced in the 1980s by the current computer-based DTP point system.

Current DTP point system

The desktop publishing point (DTP point) is defined as 1/72 of the Anglo-Saxon compromise inch of 1959 (25.4 mm), it is approximately 0.0139 inch or 0.3528 mm. Twelve points make up a pica, and six picas make an inch.

This system was notably promoted by John Warnock and Charles Geschke, the inventors of Adobe PostScript, and therefore it is sometimes also called PostScript point.

Traditional point-size names

The following names were often used in the English-speaking world for the point sizes usually available for letterpress printing[1][2]:

  • 3 pt: excelsior (US), minikin (Brit.)
  • 4 pt: brilliant
  • 4.5 pt: diamond
  • 5 pt: pearl
  • 5.5 pt: agate (US), ruby (Brit.)
  • 6 pt: nonpareille
  • 6.5 pt: minionette (US), emerald (Brit.)
  • 7 pt: minion
  • 8 pt: brevier, petit or small text
  • 9 pt: bourgeois or Galliard
  • 10 pt: long primer, corpus or Garamond (c.f. Garamond)
  • 11 pt: small pica or philosophy
  • 12 pt: pica
  • 14 pt: English, mittel or Augustin
  • 16 pt: Columbian (US), two-line brevier (Brit.)
  • 18 pt: great primer
  • 20 pt: paragon
  • 21 pt: double small pica
  • 22 pt: double small pica (US), double pica (Brit.)
  • 24 pt: double pica (US) two-line pica (Brit.)
  • 28 pt: double English (US), two-line English (Brit.)
  • 30 pt: five-line nonpareil (US)
  • 32 pt: four-line brevier (US)
  • 36 pt: double great primer (US), two-line great primer (Brit.)
  • 44 pt: Meridian (US), two-line double pica (Brit.), or Trafalgar
  • 48 pt: canon or four-line
  • 60 pt: five-line pica
  • 72 pt: inch

Note that the point sizes given here are approximate—often, especially for smaller ones, the exact size would vary from foundry to foundry or country to country. For example, metal type which was called agate has been known to have been from 5 points and up to 5.8 points. Note also that some of the sizes given are no longer considered part of the "traditional scale", such as 44 point type.[3]

Correspondence to Chinese font sizes

In China, point size is not used much; instead the following Chinese size names are used (e.g. in the Chinese version of Microsoft Word):

Chinese size name Translation Equivalent point size
chū (初) "initial" 42 points
xiǎo chū (小初) "small initial" 36 points
(一) "one" 26 points
xiǎo yī (小一) "small one" 24 points
èr (二) "two" 22 points
xiǎo èr (小二) "small two" 18 points
sān (三) "three" 16 points
xiǎo sān (小三) "small three" 15 points
(四) "four" 14 points
xiǎo sì (小四) "small four" 12 points
(五) "five" 10.5 points
xiǎo wǔ (小五) "small five" 9 points
liù (六) "six" 7.5 points
xiǎo liù (小六) "small six" 6.5 points
(七) "seven" 5.5 points
(八) "eight" 5 points

The character "号" in simplified Chinese or "號" in traditional Chinese (pinyin hào, English: "size") is appended to the Chinese name when it is not obvious that a font size is being referred to.

See also

  • Pica (typography)

References

  1. ^ Theodore Rosendorf (2009). The typographic desk reference: TDR. Oak Knoll Books. p. 25. 
  2. ^ Ken Lunde (1999). CJKV information processing. O'Reilly Media, Inc.. p. 340. 
  3. ^ http://www.sizes.com/tools/type.htm

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Point — may refer to the following: Contents 1 Business and finance 2 Engineering 3 Entertainment …   Wikipedia

  • Typography — Typographer redirects here. For the Typographer brand typewriter, see Typographer (typewriter). Not to be confused with topography or typology. In philately typography , especially in the case of 19th century stamps, refers to letterpress… …   Wikipedia

  • typography — /tuy pog reuh fee/, n. 1. the art or process of printing with type. 2. the work of setting and arranging types and of printing from them. 3. the general character or appearance of printed matter. [1635 45; < NL typographia, equiv. to Gk týpo(s)… …   Universalium

  • typography —    The design, arrangement, style, and appearance of type matter constitute typography. Among other things, students of typography learn about the uses of various type fonts, including serif and sans serif, capital and lowercase letters, boldface …   Glossary of Art Terms

  • point —    While it usually refers to a specific location, to a sculptor, a point is a simple metal tool with a pointed end used to rough out (dress) the basic shape of a stone carving. Hammered vertically and with force at the stone face, it not only… …   Glossary of Art Terms

  • History of Western typography — Contemporary typographers view typography as craft with a very long history tracing its origins back to the first punches and dies used to make seals and currency in ancient times. The basic elements of typography are at least as old as… …   Wikipedia

  • Bullet (typography) — Bullet points redirects here. For the Marvel Comics series, see Bullet Points (comics). Not to be confused with interpunct. • Bullet …   Wikipedia

  • Modern typography — was a reaction against the perceived decadence of typography and design of the late 19th century. It is mostly associated with the works of Jan Tschichold and Bauhaus typographers Herbert Bayer, Laszlo Moholy Nagy, El Lissitzky and others.… …   Wikipedia

  • Web typography — Web fonts allow Web designers to use fonts that are not installed on the viewer s computer. Web typography refers to the use of fonts on the World Wide Web. When HTML was first created, font faces and styles were controlled exclusively by the… …   Wikipedia

  • Currency (typography) — ¤ Currency sign Punctuation apostrophe ( …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”