Compound bow

Compound bow
A Browning Compound Bow

A compound bow is a modern bow that uses a levering system, usually of cables and pulleys, to bend the limbs.

The limbs of a compound bow are much stiffer than those of a recurve bow or longbow. This limb stiffness makes the compound bow more energy-efficient than other bows, in conjunction with the pulley/cams. The compound bow has its string applied to pulleys (cams), and one or both of the pulleys have one or more cables attached to the opposite limb. When the string is drawn back, the string causes the pulleys to turn. When the draw commences, the archer has reduced mechanical advantage, but during the draw, as the pulley cams rotate, and the archer gains mechanical advantage over the bending limbs, more energy is stored, in comparison to other bows.

The use of this levering system gives the compound bow a characteristic draw-force curve which rises to a peak weight and then "lets off" to a lower holding weight.

The compound bow is little-affected by changes in temperature and humidity and it gives superior accuracy, velocity, and distance in comparison to other bows. The compound bow was first developed in 1966 by Holless Wilbur Allen in Missouri, and a US patent was granted in 1969. The compound bow has become increasingly popular. In the United States, the compound is the dominant form of bow.

In literature of the early 20th century, composite bows have been described as "compound".

Contents

Construction of compound bow

Browning Compound Bow Pulley System Closeup

A bow's central mount for other components such as the limbs, sights, stabilizers and quivers is called the riser. Risers are designed to be as rigid as possible. The central riser of a compound bow is usually made of aluminium or magnesium alloy, and many are made of the aircraft-grade 6061 aluminium alloy.

Limbs are made of composite materials and are capable of taking high tensile and compressive forces. The limbs store all the energy of the bow — no energy is stored in the pulleys and cables. A draw weight can consist of 30 to 100 pounds creating speeds of 150 to 370 feet per second (46 to 113 m/s)

In the most common configuration, there is a cam or wheel at the end of each limb. The shape of the cam may vary somewhat between different bow designs. There are several different concepts of utilizing the cams to store energy in the limbs, and these all fall under a category called bow eccentrics. The four most common types of bow eccentrics are Single Cam, Hybrid Cam, Dual Cam and Binary Cam. However, there are also other less common designs, like the Quad Cam and Hinged. The "let off" is a term that describes what happens as the cam rolls all the way over. This can be seen in the close-up picture, full draw, the archer has the 'long side' of the cam. Compare to the main picture, the cams present the 'short side' to the archer. 'Let off' is therefore essentially the archer's changing leverage from a short lever to a long lever.

As the bow is drawn, the draw weight increases to a peak and then "lets off" a certain percentage of the peak draw weight before a stop (known as "the wall") prevents the bow from being drawn further. The let-off is commonly between 65% and 80% of the peak weight for recently designed compound bows, although some older compound bows only provided a let off of 50% and some of the most recent designs achieve let offs in excess of 90%.

The photo on the right shows the axle attaching the limb to cam is mounted at the edge of the cam as opposed to the center. As the string is drawn the cam turns and imparts force to compress the limb. Initially, the archer has the 'short' side of the cam, with the leverage being a mechanical disadvantage. High energy input is therefore required. When near full draw is reached, the cam has turned to its full extent, the archer has gained mechanical advantage, and the least amount of force needs to be applied to the string to keep the limbs bent. This is known as "let off". The lower holding weight enables the archer to maintain the bow fully drawn and take more time to aim. This let-off enables the archer to accurately shoot a the compound bow with a much higher peak draw weight than other bows (see below).

One manufacturer, Concept Archery, is known for producing a compound bow with 99% let-off. Although it's quite unsafe to do so, such a bow can be drawn pointed at the ground, and the mere weight of the bow will keep it drawn even if the grip is released and the bow is hung by the string (although extreme caution must be exercised to avoid accidentally disturbing the bow out of the let-off zone before establishing a firm grip on the string and the foregrip). On the other hand, there are quite a few youth-oriented compound bows with low draw weights that feature no let-off with the maximum draw length deliberately set farther than the majority of young shooters would reach. This effectively makes the bow function very similar to a recurve, with the draw length determined by the shooter's preferred anchor point, but it also removes the necessity to adjust the draw length or purchase a new bow as the shooter grows up.

Compound bow strings and cables are normally made of high-modulus polyethylene and are designed to have great tensile strength and minimal stretchability, in order that the bow transfers its energy to the arrow as efficiently and durably as possible. In earlier models of compound bows, the cables were often made of plastic-coated steel.

Comparison to other bow types

Technical advantages

  • The function of the cam systems (known as the 'eccentrics') is to maximize the energy storage throughout the draw cycle and provide let-off at the end of the cycle (less holding weight at full draw). A traditional recurve bow has a very linear draw weight curve - meaning that as the bow is drawn back, the draw force becomes increasingly heavier with each inch of draw (and most difficult at full draw). Therefore, little energy is stored in the first half of the draw, and much more energy at the end where the draw weight is heaviest. The compound bow operates with a very different weight profile, reaching its peak weight within the first few inches of the draw, and remaining more flat and constant until the end of the cycle where the cams "let-off" and allow a reduced holding weight. This manipulation of the peak weight throughout the draw (accomplished by the elliptical shape of the cams that change leverage and mechanical advantage) is why compound bows store more energy and shoot faster than an equivalent peak weight recurve bow or longbow.
  • The design of the cams directly controls the acceleration of the arrow. What is termed a "soft cam" will accelerate the arrow more gently than a "harder" cam. Novice archers will typically shoot a soft cam whereas a more advanced archer may choose to use a harder cam to gain speed. Bows can be had with a variety of cams, in a full spectrum from soft to hard.
  • Some pulley systems use a single cam at the bottom of the bow and a balanced wheel at the top of the bow instead of two identical cams. This design eliminates the need for buss cables and instead uses a single string that begins at the cam on the bottom of the bow, travels over the wheel on top, around the bottom cam again, and ends attaching to the top limb.
  • When a compound bow is drawn, the limbs are pulled in toward each other, by the buss cables, unlike a longbow or recurve where the limbs flex in the direction of the bow string. This difference allows modern compounds to have limbs that are horizontal instead of angled. The horizontal limb configuration minimizes the amount of recoil and vibration felt by the shooter when the arrow is released.
  • The bow is resistant to temperature and humidity changes giving the bow superior accuracy, velocity, and distance in comparison to bows made of natural materials.
  • The pulley system usually will include some rubber-covered blocks that act as draw-stops. These provide a solid "wall" that the archer can draw against. These draw stops can be adjusted to suit the archer's optimum draw-length. This helps the archer achieve a consistent anchor point and a consistent amount of force imparted to the arrow on every shot, further increasing accuracy.

Technical disadvantages

  • The relatively large number of moving parts requires additional maintenance and creates more points of failure.
  • Although no bows are warranted to survive a dry fire, it's not unusual for numerous parts to be damaged or destroyed after even a single compound dry fire.
  • Unlike most recurve bows, replacing the string or making adjustments to let-off or draw length often requires a bow press or a trip to an archery pro shop that has one.
  • In some compound bow models, adjusting draw length or let-off weight percentage requires replacing cams or other parts along with a bow press to do so. This makes selling and buying certain used compound bows more difficult due to considerable extra expense needed to adjust a bow that doesn't already match the new shooter's exact preference (Mathews brand bows are particularly notorious for this due to draw length that is either completely fixed or only allows up to 1" of downward adjustment before a new cam is necessary).

Circumstantial advantages

  • Compound archers usually use a mechanical release aid to hold and release the string. This attaches to the bowstring near the point where the arrow attaches,the nocking point, and permits the archer to release the string with a squeeze of a trigger or a slight increase of tension. The use of a release aid gives a more consistent release than the use of fingers on the string.
  • In tournaments, compound archers usually equip their bows with a sighting system. Some sights are magnifying and/or adjustable for targets at different distances. Some sights have multiple "pins" set up for targets at different distances.
  • Stabilisers and dampers are particularly well-developed for the compound bow. They allow the archer to hold more steady at full draw, and reduce movement of the bow as the arrow is released.

Circumstantial disadvantages

  • The relatively low holding weight of a compound bow compared to a recurve bow makes the compound more sensitive to certain shooting form faults when the archer is at full draw. In particular, it's easier for the archer to torque(twist) the bow around the vertical axis, leading to left-right errors, and also a plucked or snatched release can have more effect.

Quantities describing compound bows

AMO standard draw length is the distance from the string at full draw to the lowest point on the grip plus 1.75 inches / 4.45 cm.[1] Because the draw force may increase more or less rapidly, and again drop off more or less rapidly when approaching peak draw, bows of the same peak draw force can store different amounts of energy. Norbert Mullaney has defined the ratio of stored energy to peak draw force (S.E./P.D.F.). This is usually around one foot-pound-force per pound / 3 joules per kilogram but can reach 1.4 ft·lbf/lb / 4.2 J/kg.

Efficiency of the bows also varies. Normally between 70-85% of the stored energy is transferred to the arrow. This stored energy is referred to as potential energy. When transferred to the arrow it is referred to as kinetic energy. The product of S.E./P.D.F. and efficiency can be called power factor. There are two measurement standards of this quantity, AMO and IBO speed. AMO is defined as the initial velocity of a 35 g / 540 grain arrow when shot from a bow with a peak draw weight of 270 N / 60 lbf and draw length 76 cm / 30 inches. IBO speed is defined as the initial velocity of a 22.7 g / 350 grain arrow shot from a bow with a peak draw weight of 300 N / 70 lbf and a draw length of 76 cm / 30 inches.

Brace height is the distance from the deepest point of the grip to the string at rest. Typically a shorter brace height will result in an increased power stroke, but comes at the price of a bow that's less forgiving to shooter error and having harsher string slap.

Arrows used

Arrows used with compound bows differ significantly from arrows shot from recurve bows. Recurve bows can safely use wooden shafted arrows, or, alternatively, heavy aluminum shafted arrows, requiring in any case that arrows with more mass be used with recurve bows than with compound bows to avoid damaging recurve bows from experiencing problems from dry-firing the bow.

In contrast, shafts of arrows used with compound bows are usually made of an aluminium alloy, or carbon composite material, or a combination of these materials, and are lighter than arrows intended for use with recurve bows, thereby increasing arrow flight speed for compound bows than possible with similar draw weight recurve bows. Due to the greater forces that a compound bow places on an arrow than a recurve bow, wooden arrows may break when shot from a compound bow, possibly driving a broken arrow shaft into an archer's arm, or the arrow may shatter because of the higher acceleration forces applied to it during release. Hence, wooden arrows, that would be entirely safe with a recurve bow, are inherently dangerous to use with a compound bow. Likewise, lighter weight arrows of aluminum or carbon composite materials, that would be safe to use with a compound bow, are unsafe to use with a recurve bow.

Manufacturers thus produce arrow shafts with different weights (mass), and different stiffnesses (known as spine, more arrow stiffness implying more spine) to be consistent with a bow's draw weight. Manufacturers also manufacture arrows of different lengths in the same model of shaft to accommodate different draw lengths, matched to archers' different length arms (sometimes termed wingspan).

Arrow stiffness (spine) is an important parameter in finding arrows that will shoot accurately from any particular bow (see Archer's paradox).

See also

Bow construction techniques

References

General references

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Compound Bow ATA Standard draw length —    A method of measurement has been established to provide an industry standard of draw length and eliminate the variances in the original method caused by different thicknesses of bow risers. The ATA Standard Draw Length is arrived at by… …   Hunting glossary

  • Compound Bow Brace Height —    The distance between the pivot point of the grip and the string at rest …   Hunting glossary

  • Compound — may refer to: Chemical compounds, combinations of two or more elements Compound (enclosure), a cluster of buildings having a shared purpose, usually inside a fence or wall Compound (fortification), a version of the above fortified with defensive… …   Wikipedia

  • Bow shape — In archery, the shape of the bow is usually taken to be the view from the side. It is the product of the complex relationship of material stresses, designed by a bowyer. This shape, viewing the limbs, is designed to take into account the… …   Wikipedia

  • Bow (weapon) — A bow is a weapon that projects arrows powered by the elasticity of the bow. As the bow is drawn, energy is stored in the limbs of the bow and transformed into rapid motion when the string is released, with the string transferring this force to… …   Wikipedia

  • Bow draw — Main methods of drawing bows. A bow draw is the method used to draw a bow. Currently, the most common method is the Mediterranean draw, long the usual method in European archery. Other methods include the pinch draw and the Mongolian draw.… …   Wikipedia

  • bow and arrow — Weapon consisting of a strip of wood or other flexible material, bent and held in tension by a string. The arrow, a long wooden shaft with a pointed tip, is stabilized in flight by a feathered tail. The arrow is fitted to the string by a notch in …   Universalium

  • Bow string — A bow string joins the two ends of the bow stave and launches the arrow. Desirable properties include light weight, strength, resistance to abrasion, and resistance to water. Mass has most effect at the center of the string; one gram of extra… …   Wikipedia

  • Compound-Bogen — Compoundbogen der Fa. Hoyt mit Twin Limbs und Twin Cams Der Compoundbogen (v. engl. compound „Verbundstoff“) ist eine moderne Ausführung des Bogens, die 1969 in den USA erfunden wurde. Das auffälligste Merkmal sind kleine nockenähnliche… …   Deutsch Wikipedia

  • Composite bow — Reconstruction of a Ming dynasty Kaiyuan bow by Chinese bowyer Gao Xiang. This is a horn, bamboo, sinew composite …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”