Transponder timing

Transponder timing
A Jaguar finish line with Jaguar (Innovative Timing Systems) which utilizes RFID technology through overhead antennas and passive, disposable chips.
A ChronoTrack race controller with RFID antennas for detecting transponders attached to runner's shoes.
ChampionChip.

Transponder timing (also called chip timing or RFID timing) is a technique for measuring performance in sport events. A transponder working on a radio-frequency identification (RFID) basis is attached to the athlete and emits a unique code that is detected by radio receivers located at the strategic points in an event.

Prior to the use of this technology, races were either timed by hand (with operators pressing a stop-watch) or using video camera systems.

Contents

Transponder systems

Generically, there are two types of transponder timing systems; active and passive. An active transponder consists of a battery-powered transceiver, connected to the athlete, that emits its unique code when it is interrogated.

A passive transponder does not contain a power source inside the transponder. Instead, the transponder captures electromagnetic energy produced by a near-by exciter and utilizes that energy to emit its unique code.

In both systems, an antenna is placed at the start, finish, and in some cases, intermediate time points and is connected to a decoder. This decoder identifies the unique transponder code and calculates the exact time when the transponder passes a timing point. Some implementations of timing systems require the use of a mat on the ground at the timing points while other systems implement the timing points with vertically oriented portals.

History

The first manufacture to introduce transponder timing was AMB Identification & Timing, although it was in motorized racing. Since 1983, AMB active transponders are used in several motorized sports ranging from RC model car racing, high speed car racing, motocross, motor cycle racing, kart racing to snow cross. Since 1992 AMB transponders are also used in non motorized sports such as cycling, marathon, horse racing and triathlon.

Usage

As events draw very large numbers of participants (in some cases over 60,000 runners), there are delays in participants reaching the start line, which penalize their performance. Some races place antennas or timing mats at both the start line and the finish line, which allow the exact net time to be calculated. A controversy has developed as to whether awards in a race should be based on the "gun time" (which ignores any delay at the start) or "net time" (which subtracts the delay.) The USA Track and Field rules have decided that performance is based on "gun time." However, some races use "net time" for presenting age group awards.

When transponder timing was first introduced, the running community hoped for a universal standard, so that timing systems could operated interchangeably, with no overlap in chip serial numbers. However, race management companies have invested in incompatible systems, and individual runners who purchase a chip from one manufacturer find that the chip is not operable in races that use a competitor's equipment. The market share of the different, incompatible transponder systems vary in each local market, depending upon which system was adopted by the local clubs or timing companies.

Back side of disposable RFID tag used for race timing showing components.
Back side of disposable RFID tag used for race timing.

As the cost of transponder tags have declined, the use of disposable tags has become more popular. The technology is the same as a reusable tag, but the race does not bother to collect and recycle the tags at the finish line. One manufacturer has developed a tag which is taped to a Tyvek strip, without a permanent glass or plastic form factor. The strip is then formed as a loop and laced to the running shoe. Another manufacturer has developed a tag that is taped to the runners race number. This has the added feature of increased accuracy in being recorded as the participant's torso crosses the finish line as opposed to the lead or trail foot, which sometimes leads to incorrect place results.

See also

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Transponder — A Highway 407 toll transponder In telecommunication, the term transponder (short for Transmitter responder and sometimes abbreviated to XPDR,[1] XPNDR,[2] TPDR …   Wikipedia

  • ChampionChip — ChampionChip[citation needed] system setup. The athlete wears the chip on their shoe. Dutch system based since 1992 on a Texas Instruments TMS370 microcontroller from TIRIS …   Wikipedia

  • Radio-frequency identification — (RFID) is a technology that uses radio waves to transfer data from an electronic tag, called RFID tag or label, attached to an object, through a reader for the purpose of identifying and tracking the object. Some RFID tags can be read from… …   Wikipedia

  • Pigeon racing — For the bicycle company, see Flying Pigeon. Pigeon racing is the sport of releasing specially trained racing pigeons, which then return to their homes over a carefully measured distance. The time it takes the animal to cover the specified… …   Wikipedia

  • Cooper River Bridge Run — The Cooper Bridge in South Carolina The Cooper River Bridge Run is an annual 10 kilometer (6.2 mi) one way road running event held in the cities of Mount Pleasant and Charleston in South Carolina, on the first Saturday in April, unless it is …   Wikipedia

  • Army Ten-Miler — In 2000, this race was the largest 10 mile road race in the world.The annual race weekend events also include a youth run, a youth activity fair, and a pre race pasta dinner. The race uses transponder timing, and draws a large number of civilian… …   Wikipedia

  • Pole Position Raceway — is a chain of indoor kart tracks in the United States. The company was founded by Jason Williams and Ken Faught. The company opened its first track in Corona, California in September 2005 [Reference for the time the company opened… …   Wikipedia

  • Chip — Contents 1 Food 2 Media 2.1 Characters 2.2 Games …   Wikipedia

  • Chicago Marathon — Logo for the Chicago Marathon. Date October 9, 2011 Location Chicago, Uni …   Wikipedia

  • Roberto Madrazo — Pintado (born July 30, 1952) is a Mexican politician affiliated with the Institutional Revolutionary Party (PRI). He was the candidate of the alliance between his party and the Ecologist Green Party of Mexico (PVEM) in the 2006 Mexican… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”