Semi-empirical mass formula

Semi-empirical mass formula

In nuclear physics, the semi-empirical mass formula (SEMF), sometimes also called Weizsäcker's formula, is a formula used to approximate the mass and various other properties of an atomic nucleus. As the name suggests, it is partially based on theory and partly on empirical measurements; the theory is based on the liquid drop model, and can account for most of the terms in the formula, and gives a rough estimates for the values of the coefficients. It was first formulated in 1935 by German physicist Carl von Weizsäcker, and although refinements have been made to the coefficients over the years, the form of the formula remains the same today.

This formula should not be confused with the mass formula of Weizsäcker's student Burkhard Heim.

The formula gives a good approximation for atomic masses and several other effects, but does not explain the appearance of magic numbers.

The liquid drop model and its analysis

The liquid drop model is a model in nuclear physics which treats the nucleus as a drop of incompressible nuclear fluid, first proposed by George Gamow and developed by Niels Bohr and John Archibald Wheeler. The fluid is made of nucleons (protons and neutrons), which are held together by the strong nuclear force.

This is a crude model that does not explain all the properties of nuclei, but does explain the spherical shape of most nuclei.It also helps to predict the binding energy of the nucleus.

Mathematical analysis of the theory delivers an equation which attempts to predict the binding energy of a nucleus in terms of the numbers of protons and neutrons it contains. This equation has five terms on its right hand side. These correspond to the cohesive binding of all the nucleons by the strong nuclear force, the electrostatic mutual repulsion of the protons, a surface energy term, an asymmetry term (derivable from the protons and neutrons occupying independent quantum momentum states) and a pairing term (partly derivable from the protons and neutrons occupying independent quantum spin states).

If we consider the sum of the following five types of energies, then the picture of a nucleus as a drop of incompressible liquid roughly accounts for the observed variation of binding energy of the nucleus:

Volume energy. When an assembly of nucleons of the same size is packed together into the smallest volume, each interior nucleon has a certain number of other nucleons in contact with it. So, this nuclear energy is proportional to the volume.

Surface energy. A nucleon at the surface of a nucleus interacts with fewer other nucleons than one in the interior of the nucleus and hence its binding energy is less. This surface energy term takes that into account and is therefore negative and is proportional to the surface area.

Coulomb Energy. The electric repulsion between each pair of protons in a nucleus contributes toward decreasing its binding energy.

Asymmetry energy (also called Pauli Energy). An energy associated with the Pauli exclusion principle. If it wasn't for the Coulomb energy, the most stable form of nuclear matter would have "N"="Z", since unequal values of "N" and "Z" imply filling higher energy levels for one type of particle, while leaving lower energy levels vacant for the other type.

Pairing energy. An energy which is a correction term that arises from the tendency of proton pairs and neutron pairs to occur. An even number of particles is more stable than an odd number.

The formula

In the following formulae, let "A" be the total number of nucleons, "Z" the number of protons, and "N" the number of neutrons.

The mass of an atomic nucleus is given by:m = Z m_{p} + N m_{n} - frac{E_{B{c^{2where m_{p} and m_{n} are the rest mass of a proton and a neutron, respectively, and E_{B} is the binding energy of the nucleus. The semi-empirical mass formula states that the binding energy will take the following form::E_{B} = a_{V} A - a_{S} A^{2/3} - a_{C} frac{Z(Z-1)}{A^{1/3 - a_{A} frac{(A - 2Z)^{2{A} + delta(A,Z)

Each of the terms in this formula has a theoretical basis, as will be explained below.

Terms

Volume term

The term a_{V} A is known as the "volume term". The volume of the nucleus is proportional to "A", so this term is proportional to the volume, hence the name.

The basis for this term is the strong nuclear force. The strong force affects both protons and neutrons, and as expected, this term is independent of "Z". Because the number of pairs that can be taken from "A" particles is frac{A(A - 1)}{2}, one might expect a term proportional to A^{2}. However, the strong force has a very limited range, and a given nucleon may only interact strongly with its nearest neighbors and next nearest neighbors. Therefore, the number of pairs of particles that actually interact is roughly proportional to "A", giving the volume term its form.

The coefficient a_{V} is smaller than the binding energy of the nucleons to their neighbours E_b, which is of order of 40 MeV. This is because the bigger the number of nucleons in the nucleus, the larger their kinetic energy is, due to Pauli's exclusion principle. If one treats the nucleus as a Fermi ball of A nucleons, with equal numbers of protons and neutrons, then the total kinetic energy is {3over 5} A epsilon_F, with epsilon_F the Fermi energy which is estimated as 38 MeV. Thus the expected value of a_{V} in this model is E_b - {3over 5}epsilon_F sim 17;mathrm{MeV} , not far from the measured value.

urface term

The term a_{S} A^{2/3} is known as the "surface term". This term, also based on the strong force, is a correction to the volume term.

The volume term suggests that each nucleon interacts with a constant number of nucleons, independent of "A". While this is very nearly true for nucleons deep within the nucleus, those nucleons on the surface of the nucleus have fewer nearest neighbors, justifying this correction. This can also be thought of as a surface tension term, and indeed a similar mechanism creates surface tension in liquids.

If the volume of the nucleus is proportional to "A", then the radius should be proportional to A^{1/3} and the surface area to A^{2/3}. This explains why the surface term is proportional to A^{2/3}. It can also be deduced that a_S should have a similar order of magnitude as a_V.

Coulomb term

The term a_{C} frac{Z(Z-1)}{A^{1/3 is known as the "Coulomb" or "electrostatic term".

The basis for this term is the electrostatic repulsion between protons. To a very rough approximation, the nucleus can be considered a sphere of uniform charge density. The potential energy of such a charge distribution can be shown to be:frac{3}{5} frac{1}{4 pi epsilon_{0 frac{Q^{2{R}where "Q" is the total charge and "R" is the radius of the sphere. Identifying "Q" with Z e, and noting as above that the radius is proportional to A^{1/3}, we get close to the form of the Coulomb term. However, because electrostatic repulsion will only exist for more than one proton, Z^2 becomes Z(Z-1).

The value of a_{C} can be approximately calculated using the equation above. In natural units this is:frac{3}{5} frac{alpha}{R_0}where alpha is the fine structure constant and A^{1/3}R_0 is the radius of a nucleus, giving R_0 to be approximately 1.5 femtometers. This gives a_C an approximate theoretical value of 0.58 MeV, not far from the measured value.

Asymmetry term

The term a_{A} frac{(A - 2Z)^{2{A} is known as the "asymmetry term". The theoretical justification for this term is more complex. Note that as A = N + Z, the parenthesized expression can be rewritten as (N - Z). The form (A - 2Z) is used to keep the dependence on "A" explicit, as will be important for a number of uses of the formula.

The Pauli exclusion principle states that no two fermions can occupy exactly the same quantum state. At a given energy level, there are only finitely many quantum states available for particles. What this means in the nucleus is that as more particles are "added", these particles must occupy higher energy levels, increasing the total energy of the nucleus (and decreasing the binding energy). Note that this effect is not based on any of the fundamental forces (gravitational, electromagnetic, etc.), only the Pauli exclusion principle.

Protons and neutrons, being distinct types of particles, occupy different quantum states. One can think of two different "pools" of states, one for protons and one for neutrons. Now, for example, if there are significantly more neutrons than protons in a nucleus, some of the neutrons will be higher in energy than the available states in the proton pool. If we could move some particles from the neutron pool to the proton pool, in other words change some neutrons into protons, we would significantly decrease the energy. The imbalance between the number of protons and neutrons causes the energy to be higher than it needs to be, "for a given number of nucleons". This is the basis for the asymmetry term.

The actual form of the asymmetry term can again be derived by modelling the nucleus as a Fermi ball of protons and neutrons. Its total kinetic energy is :E_k = {3 over 5} (N_p {epsilon_F}_p + N_n {epsilon_F}_n)where N_p, N_n are the numbers of protons and neutrons and {epsilon_F}_p, {epsilon_F}_n are their Fermi energies. Since the latter are proportional to {N_p}^{2/3} and {N_n}^{2/3}, respectively, one gets:E_k = C (N_p^{5/3} + N_n^{5/3}) for some constant "C".The leading expansion in the difference N_n - N_p is then :E_k = {Cover 2^{2/3 left((N_p+N_n)^{5/3} + {5over 9}{(N_n-N_p)^2 over (N_p+N_n)^{1/3 ight) + O((N_n-N_p)^2)At the zeroth order expansion the kinetic energy is just the Fermi energy epsilon_Fequiv {epsilon_F}_p = {epsilon_F}_n multiplied by {3over 5}(N_p+N_n)^{2/3}. Thus we get:E_k = {3over 5}epsilon_F (N_p+N_n)^{2/3}+ {1over 3}epsilon_F {(N_n-N_p)^2 over (N_p+N_n)} + O((N_n-N_p)^4)= {3over 5}epsilon_F A^{2/3}+ {1over 3}epsilon_F {(A-2Z)^2 over A} + O((A-2Z)^4)

The first term contributes to the volume term in the semi-empirical mass formula, and the second term is minus the asymmetry term (remember the kinetic energy contributes to the total binding energy with a "negative" sign).

epsilon_F is 38 MeV, so calculating a_A from the equation above, we get only half the measured value. The discrepancy is explained by our model not being accurate: nucleons in fact interact with each other, and are not spread evenly across the nucleus. For example, in the shell model, a proton and a neutron with overlapping wavefunctions will have a greater strong interaction between them and stronger binding energy. This makes it energetically favourable (i.e. having lower energy) for protons and neutrons to have the same quantum numbers (other than isospin), and thus increase the energy cost of asymmetry between them.

One can also understand the asymmetry term intuitively, as follows. It should be dependent on the absolute difference |N - Z|, and the form (A - 2Z)^{2} is simple and differentiable, which is important for certain applications of the formula. In addition, small differences between "Z" and "N" do not have a high energy cost. The "A" in the denominator reflects the fact that a given difference |N - Z| is less significant for larger values of "A".

Pairing term

The term delta(A,Z) is known as the "pairing term" (possibly also known as the pairwise interaction). This term captures the effect of spin-coupling. It is given by:

:delta(A,Z) = egin{cases} +delta_{0} & Z,N mbox{ even } (A mbox{ even}) \ 0 & A mbox{ odd} \ -delta_{0} & Z,N mbox{ odd } (A mbox{ even})end{cases}where:delta_{0} = frac{a_{P{A^{1/3

Due to Pauli exclusion principle the nucleus would have a lower energy if the number of protons with spin up will be equal to the number of protons with spin down. This is also true for neutrons. Only if both "Z" and "N" are even, both protons and neutrons can have equal numbers of spin up and spin down particles. This is a similar effect to the asymmetry term.

The factor A^{-1/3} is not easily explained theoretically. The Fermi ball calculation we have used above, based on the liquid drop model but neglecting interactions, will give an A^{-1} dependence, as in the asymmetry term. This means that the actual effect for large nuclei will be larger than expected by that model. This should be explained by the interactions between nucleons; For example, in the shell model, two protons with the same quantum numbers (other than spin) will have completely overlapping wavefunctions and will thus have greater strong interaction between them and stronger binding energy. This makes it energetically favourable (i.e. having lower energy) for protons to pair in pairs of opposite spin. The same is true for neutrons.

Calculating the coefficients

The coefficients are calculated by fitting to experimentally measured masses of nuclei. Their values can vary depending on how they are fitted to the data. Several examples are as shown below, with units of megaelectronvolts (MeV):

* Wapstra: "Atomic Masses of Nuclides", A. H. Wapstra, Springer, 1958
* Rohlf: "Modern Physics from a to Z0", James William Rohlf, Wiley, 1994

The semi-empirical mass formula provides a good fit to heavier nuclei, and a poor fit to very light nuclei, especially 4He. This is because the formula does not consider the internal shell structure of the nucleus. For light nuclei, it is usually better to use a model that takes this structure into account.

Examples for consequences of the formula

By maximizing "B"("A","Z") with respect to "Z", we find the number of protons "Z" of the stable nucleus of atomic weight "A".We get :Z = {1over 2} A {1over 1 + A^{2/3} {a_Cover 4 a_AThis is roughly "A"/2 for light nuclei, but for heavy nuclei there is an even better agreement with nature.

By substituting the above value of "Z" back into "B" one obtains the binding energy as a function of the atomic weight, "B"("A").Maximizing "B"("A")/"A" with respect to "A" gives the nucleus which is most strongly bound, i.e. most stable. The value we get is "A"=63 (copper), close to the measured values of "A"=62 (nickel) and "A"=58 (iron).

ee also

*Nuclear structure
*Interacting boson model
*Shell model

References

# R.Freedman, H.Young (2004), "University Physics with Modern Physics", 11th international edition, Sears and Zemansky, 1633-4. ISBN 0-8053-8768-4.
# S.E.Liverhant (1960), "Elementary Introduction to Nuclear Reactor Physics", John Wiley & Sons, 58-62.
# " [http://book.nc.chalmers.se/ RADIOCHEMISTRY and NUCLEAR CHEMISTRY] ", Gregory Choppin, Jan-Olov Liljenzin, and Jan Rydberg, 3rd Edition, 2002, [http://book.nc.chalmers.se/KAPITEL/CH03NY3.PDF the chapter on nuclear stability] (PDF)

External links

* [http://hyperphysics.phy-astr.gsu.edu/hbase/nuclear/liqdrop.html Nuclear liquid drop model]
* [http://www.phy.uct.ac.za/courses/phy300w/np/ch1/node22.html The semi-empirical mass formula]
* [http://hyperphysics.phy-astr.gsu.edu/hbase/nuclear/liqdrop.html Liquid drop model] in the [http://hyperphysics.phy-astr.gsu.edu/HBASE/hframe.html hyperphysics] online reference at Georgia State University.
* [http://www.phys.jyu.fi/research/gamma/publications/akthesis/node4.html Liquid drop model with parameter fit] from "First Observations of Excited States in the Neutron Deficient Nuclei 160,161W and 159Ta", Alex Keenan, PhD thesis, University of Liverpool, 1999 ( [http://www.phys.jyu.fi/research/gamma/publications/akthesis/thesis.html HTML version] ).


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Mass formula — For the mass formula of quadratic forms see Smith–Minkowski–Siegel mass formula. A mass formula is an equation or set of equations in physics which attempts to predict the mass or mass ratios of the subatomic particles. An important step in high… …   Wikipedia

  • mass spectrometry — or mass spectroscopy Analytic technique by which chemical substances are identified by sorting gaseous ions by mass using electric and magnetic fields. A mass spectrometer uses electrical means to detect the sorted ions, while a mass spectrograph …   Universalium

  • Mass — This article is about the scientific concept. For the substance of which all physical objects consist, see Matter. For other uses, see Mass (disambiguation). Classical mechanics …   Wikipedia

  • Nuclear binding energy — is the energy required to split a nucleus of an atom into its component parts. The component parts are neutrons and protons, which are collectively called nucleons. If the binding energy for the products is higher when light nuclei fuse, or when… …   Wikipedia

  • Abundance of the chemical elements — Estimated proportions of matter, dark matter and dark energy in the universe. Only the fraction of the mass and energy in the universe labeled atoms is composed of chemical elements. The abundance of a chemical element measures how relatively… …   Wikipedia

  • Atomic nucleus — A figurative depiction of the helium 4 atom with the electron cloud in shades of gray. In the nucleus, the two protons and two neutrons are depicted in red and blue. This depiction shows the particles as separate, whereas in an actual helium atom …   Wikipedia

  • Magic number (physics) — Graph of isotope stability. In nuclear physics, a magic number is a number of nucleons (either protons or neutrons) such that they are arranged into complete shells within the atomic nucleus. The seven most widely recognised magic numbers as of… …   Wikipedia

  • Binding energy — Nuclear physics Radioactive decay Nuclear fission Nuclear fusion Classical decays …   Wikipedia

  • Fifth force — Occasionally, physicists have postulated the existence of a fifth force in addition to the four known fundamental forces. The force is generally believed to have roughly the strength of gravity (i.e. it is much weaker than electromagnetism or the …   Wikipedia

  • Nuclear structure — Physics portal This page is an adapted translation of the corresponding fr:Structure nucléaire As will be noted, there remain void paragraphs, as on the original (which provides no sources). Competent Wikipedians are welcom …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”