- New South Wales D55 class locomotive
-
New South Wales D55 class 
5616 stands at Junee ready to depart with a train of wheat hopper wagons. Power type Steam Builder Clyde Engineering Build date 1918–1925 Total produced 120 Configuration 2-8-0 UIC classification 1'Dh Gauge 4 ft 8 1⁄2 in (1,435 mm) Driver diameter 4 ft 9 in (1.448 m) Weight on drivers 150,000 lb (68 t) Locomotive weight 165,000 lb (75 t) Fuel type Coal or oil Boiler pressure 160 psi (1.10 MPa) Firegrate area 29 sq ft (2.7 m2) Heating surface:
Total1,755 sq ft (163.0 m2) Superheater area 365 sq ft (33.9 m2) Cylinders Two Cylinder size 22 × 26 in (559 × 660 mm) Valve gear Southern Tractive effort 33,557 lbf (149.3 kN) Factor of
adhesion4.46 Career New South Wales Government Railways Class K1353, D55 from 1924 Number 1353–1454,
5501–5620 from 1924Disposition One preserved, remainder scrapped The D55 class was a class of steam locomotives operated by the New South Wales Government Railways in Australia. They were built with the 2-8-0 wheel arrangement.
Contents
Construction
A contract was given in 1916 to Clyde Engineering Company of Granville for the construction of 300 K-class locomotives. Following experiments with Southern type valve gear on an earlier class, Edward Lucy, the Chief Mechanical Engineer of the N.S.W.G.R., proposed its installation on these locomotives. The use of Southern valve gear was rare on locomotives operating outside the United States of America. The first of the class, then classified as K1353, entered traffic on 29 November, 1918. Due to financial difficulties at Clyde Engineering, the next member did not appear for a further two years. Meanwhile, the contract had been reduced to just 120 locomotives. All were in service by March, 1925 and were fitted with a Wampu type tender. The last thirty of the class were fitted with self-cleaning smokeboxes and had other modifications.
Operations
The members of this class spent most of their days attached to depots at Enfield, Goulburn, Harden, Junee and Cowra. They were seldom used on western or northern lines.
With the discontent and industrial action in the coalfields following World War II, it was decided in 1946 to convert some of the class to oil burners. The 55-class was chosen as the outside valve gear gave more room for the installation of the new equipment, which included altered firebox and smokebox. The tenders were fitted with a 2,400-imperial-gallon (11,000 l; 2,900 US gal) fuel tank. The fuel oil was injected into the firebox by a jet of steam from the locomotive boiler, the flow being controlled by the fireman. The first six locomotives converted were fitted to burn distillate which was five times the cost of coal firing, although it was hoped that reduced servicing times would offset some of that extra cost.
5610 stands at Hawkesbury River with a construction train for the electrification project
When cheaper crude oil became available, the locomotives were again modified to allow them to burn this heavier product. This required the installation of heating coils in the tank and pre-heating adjacent to the burner to ensure complete atomisation. A further 10 locomotives were converted in 1947, followed by another 54 in 1949. As the crisis passed, the oil burning locomotives were withdrawn as they were still four times more expensive to run than the coal fired ones. 16 were converted back to coal firing. The last oil burning 55-class was 5591 which was withdrawn in February, 1959.
A distinctive feature of the oil burning locomotives was a hinged lid provided over the chimney to protect the boiler tubes and flues from sudden cooling when the oil fire was cut off.
The last country depots to have 55-class locomotives were Goulburn and Cowra. 5597 was the last of the class in service, being attached to Enfield depot until June, 1967. Of the Standard Goods engines, the 55-class were thus the first to be retired. The Southern valve gear did not give as good steam distribution as was desirable, making the locomotives a little sluggish when hauling heavy loads, compared to the similar classes.
Preservation
5595 is the sole survivor. It has been cosmetically restored and is displayed with a Commonwealth Turret Tender at the New South Wales Rail Transport Museum.
References
- Grunbach, Alex. (1989), A Compendium of New South Wales Steam Locomotives, Australian Railway Historical Society NSW Division, ISBN 0-909650 27 6
Sydney and New South Wales Rail Rollingstock NSWGR steam locomotive X10 class • Z11 class • Z12 class • Z13 class • Z14 class • Z15 class • Z16 class • Z17 class • Z18 class • Z19 class • Z20 class • Z21 class • Z23 class • Z24 class • Z25 class • Z26 class • Z27 class (2705) • Z28 class • Z29 class • C30 class (3112) • C30T class (3016T) • C32 class (3237) (3265) • C34 class • C35 class (3526) • C36 class (3642) • C38 class (3801) (3820) (3830) • D50 class • D53 class • D55 class • D57 class • D58 class • D59 class (5917) • AD60 classNSW Private Steam SMR10 classDiesel locomotive Electric locomotive Electric multiple unit U set • L, R, and S sets • K set • C set • V set • T & G sets (Tangara) • M set (Millennium) • H set (OSCARs) • A set (Waratah)Diesel railcar Categories:- New South Wales locomotives
- 2-8-0 locomotives
- Clyde Engineering locomotives
- Railway locomotives introduced in 1918
Wikimedia Foundation. 2010.
